79 lines
1.5 KiB
Plaintext
79 lines
1.5 KiB
Plaintext
protocol device {
|
|
scan time 10;
|
|
}
|
|
|
|
protocol static {
|
|
route 172.20.170.192/28 reject;
|
|
import all;
|
|
export none;
|
|
}
|
|
|
|
include "/etc/bird/local4.conf";
|
|
|
|
# filter helpers
|
|
#################
|
|
|
|
##include "/etc/bird/filter4.conf";
|
|
|
|
protocol kernel {
|
|
scan time 20;
|
|
metric 64; # Use explicit kernel route metric to avoid collisions
|
|
# with non-BIRD routes in the kernel routing table
|
|
import none;
|
|
#export all; # Actually insert routes into the kernel routing table
|
|
export filter {
|
|
if source = RTS_STATIC then reject;
|
|
krt_prefsrc = OWNIP;
|
|
accept;
|
|
};
|
|
}
|
|
|
|
filter filter_OSPF {
|
|
if net = 172.20.170.192/28 then accept;
|
|
else reject;
|
|
};
|
|
|
|
protocol ospf {
|
|
import all;
|
|
export all;
|
|
|
|
area 0 {
|
|
|
|
include "/etc/bird/interfaces/*";
|
|
|
|
interface "lo" {
|
|
stub;
|
|
};
|
|
};
|
|
}
|
|
|
|
template bgp dnpeers {
|
|
local as OWNAS;
|
|
# metric is the number of hops between us and the peer
|
|
path metric 1;
|
|
# this lines allows debugging filter rules
|
|
# filtered routes can be looked up in birdc using the "show route filtered" command
|
|
import keep filtered;
|
|
import filter {
|
|
# accept every subnet, except our own advertised subnet
|
|
# filtering is important, because some guys try to advertise routes like 0.0.0.0
|
|
if is_valid_network() && !is_self_net() then {
|
|
accept;
|
|
}
|
|
reject;
|
|
};
|
|
|
|
export filter {
|
|
# here we export the whole net
|
|
if is_valid_network() then {
|
|
accept;
|
|
}
|
|
reject;
|
|
};
|
|
|
|
import limit 1000 action block;
|
|
#source address 172.20.170.192;
|
|
};
|
|
|
|
include "/etc/bird/peers4/*";
|