Fixed indention

chapter/mgmt.tex

@@ -222,7 +222,7 @@ Other things can go wrong, too. Such as
 
 \fig{radius/radiuscommunication}{radiuscommunication}{Radius handshake and communication}
 
-\begin{txt}
+\begin{cisco}
 radius server DK-RADIUS-SERVER
  address ipv4 radiusserver.example.com auth-port 1812 acct-port 1813
  key unkn0wn!unic@st.|.
@@ -233,11 +233,11 @@ Other things can go wrong, too. Such as
 !
 aaa authentication login radius_list group RADIUS local
 !
-	line vty 0-4
+line vty 0 4
  login authentication radius_list
-	line vty 5-15
+line vty 5 15
  login authentication radius_list
-\end{txt}
+\end{cisco}
 
 \newpage
 
@@ -245,7 +245,7 @@ Other things can go wrong, too. Such as
 
 \fig{tacacsplus/tacacspluscommunication}{tacacspluscommunication}{Tacacs plus handshake and communication}
 
-\begin{txt}
+\begin{cisco}
 aaa group server tacacs+ TACACS
  server-private 1.1.1.1 unkn0wn!unicAst
  ip tacacs source-interface Loopback0
@@ -277,7 +277,7 @@ Other things can go wrong, too. Such as
 !
 tacacs-server host 10.21.0.45
 tacacs-server unkn0wn!unicAst
-\end{txt}
+\end{cisco}
 
 \section{802.1X}
 
@@ -309,17 +309,19 @@ Cisco switches allow by default only the following 3 protos until the client is
 
 \subsection*{Enable with Cisco config}
 
-\begin{txt}
+\begin{cisco}
 aaa new-model
 radius server host radiusserver.example.com key .unkown!unicAst.
  aaa group server radius RADIUS-SERVER-DK
  server radiusserver.example.com
+!
 aaa authetication dot1x default group RADIUS-SERVER-DK
  dot1x system-auth-control
+!
 interface GigabitEthernet 0/4
  switchport mode access         ! Port must be an access port prior
  dot1x port-control auto        ! to enable dot1x on the port
-\end{txt}
+\end{cisco}
 
 \section[SNMP]{Simple Network Management Protocol}