parallel/src/parallel.texi

\input texinfo
@setfilename parallel.info

@documentencoding utf-8

@settitle parallel - build and execute shell command lines from standard input in parallel

@node Top
@top parallel

@chapter NAME
@anchor{NAME}

parallel - build and execute shell command lines from standard input in parallel

@chapter SYNOPSIS
@anchor{SYNOPSIS}

@strong{parallel} [options] [@emph{command} [arguments]] < list_of_arguments

@strong{parallel} [options] [@emph{command} [arguments]] ( @strong{:::} arguments |
@strong{::::} argfile(s) ) ...

@strong{parallel} --semaphore [options] @emph{command}

@strong{#!/usr/bin/parallel} --shebang [options] [@emph{command} [arguments]]

@chapter DESCRIPTION
@anchor{DESCRIPTION}

GNU @strong{parallel} is a shell tool for executing jobs in parallel using
one or more computers. A job can be a single command or a small
script that has to be run for each of the lines in the input. The
typical input is a list of files, a list of hosts, a list of users, a
list of URLs, or a list of tables. A job can also be a command that
reads from a pipe. GNU @strong{parallel} can then split the input into
blocks and pipe a block into each command in parallel.

If you use xargs and tee today you will find GNU @strong{parallel} very easy to
use as GNU @strong{parallel} is written to have the same options as xargs. If
you write loops in shell, you will find GNU @strong{parallel} may be able to
replace most of the loops and make them run faster by running several
jobs in parallel.

GNU @strong{parallel} makes sure output from the commands is the same output as
you would get had you run the commands sequentially. This makes it
possible to use output from GNU @strong{parallel} as input for other programs.

For each line of input GNU @strong{parallel} will execute @emph{command} with
the line as arguments. If no @emph{command} is given, the line of input is
executed. Several lines will be run in parallel. GNU @strong{parallel} can
often be used as a substitute for @strong{xargs} or @strong{cat | bash}.

@section Reader's guide
@anchor{Reader's guide}

Before looking at the options you may want to check out the @strong{EXAMPLE}s
after the list of options. That will give you an idea of what GNU
@strong{parallel} is capable of.

You can also watch the intro video for a quick introduction:
http://tinyogg.com/watch/TORaR/ http://tinyogg.com/watch/hfxKj/ and
http://tinyogg.com/watch/YQuXd/ or
http://www.youtube.com/playlist?list=PL284C9FF2488BC6D1

@chapter OPTIONS
@anchor{OPTIONS}

@table @asis
@item @emph{command}
@anchor{@emph{command}}

Command to execute.  If @emph{command} or the following arguments contain
replacement strings (such as @strong{@{@}}) every instance will be substituted
with the input.

If @emph{command} is given, GNU @strong{parallel} solve the same tasks as
@strong{xargs}. If @emph{command} is not given GNU @strong{parallel} will behave
similar to @strong{cat | sh}.

The @emph{command} must be an executable, a script, a composed command, or
a function. If it is a function you need to @strong{export -f} the function
first. An alias will, however, not work (see why
http://www.perlmonks.org/index.pl?node_id=484296).

@item @strong{@{@}}
@anchor{@strong{@{@}}}

Input line. This replacement string will be replaced by a full line
read from the input source. The input source is normally stdin
(standard input), but can also be given with @strong{-a}, @strong{:::}, or
@strong{::::}.

The replacement string @strong{@{@}} can be changed with @strong{-I}.

If the command line contains no replacement strings then @strong{@{@}} will be
appended to the command line.

@item @strong{@{.@}}
@anchor{@strong{@{.@}}}

Input line without extension. This replacement string will be replaced
by the input with the extension removed. If the input line contains
@strong{.} after the last @strong{/} the last @strong{.} till the end of the string will
be removed and @strong{@{.@}} will be replaced with the
remaining. E.g. @emph{foo.jpg} becomes @emph{foo}, @emph{subdir/foo.jpg} becomes
@emph{subdir/foo}, @emph{sub.dir/foo.jpg} becomes @emph{sub.dir/foo},
@emph{sub.dir/bar} remains @emph{sub.dir/bar}. If the input line does not
contain @strong{.} it will remain unchanged.

The replacement string @strong{@{.@}} can be changed with @strong{--er}.

To understand replacement strings see @strong{@{@}}.

@item @strong{@{/@}}
@anchor{@strong{@{/@}}}

Basename of input line. This replacement string will be replaced by
the input with the directory part removed.

The replacement string @strong{@{/@}} can be changed with
@strong{--basenamereplace}.

To understand replacement strings see @strong{@{@}}.

@item @strong{@{//@}}
@anchor{@strong{@{//@}}}

Dirname of input line. This replacement string will be replaced by the
dir of the input line. See @strong{dirname}(1).

The replacement string @strong{@{//@}} can be changed with
@strong{--dirnamereplace}.

To understand replacement strings see @strong{@{@}}.

@item @strong{@{/.@}}
@anchor{@strong{@{/.@}}}

Basename of input line without extension. This replacement string will
be replaced by the input with the directory and extension part
removed. It is a combination of @strong{@{/@}} and @strong{@{.@}}.

The replacement string @strong{@{/.@}} can be changed with
@strong{--basenameextensionreplace}.

To understand replacement strings see @strong{@{@}}.

@item @strong{@{#@}}
@anchor{@strong{@{#@}}}

Sequence number of the job to run. This replacement string will be
replaced by the sequence number of the job being run. It contains the
same number as $PARALLEL_SEQ.

The replacement string @strong{@{#@}} can be changed with @strong{--seqreplace}.

To understand replacement strings see @strong{@{@}}.

@item @strong{@{}@emph{n}@strong{@}}
@anchor{@strong{@{}@emph{n}@strong{@}}}

Argument from input source @emph{n} or the @emph{n}'th argument. This
positional replacement string will be replaced by the input from input
source @emph{n} (when used with @strong{-a} or @strong{::::}) or with the @emph{n}'th
argument (when used with @strong{-N}).

To understand replacement strings see @strong{@{@}}.

@item @strong{@{}@emph{n}.@strong{@}}
@anchor{@strong{@{}@emph{n}.@strong{@}}}

Argument from input source @emph{n} or the @emph{n}'th argument without
extension. It is a combination of @strong{@{}@emph{n}@strong{@}} and @strong{@{.@}}.

This positional replacement string will be replaced by the input from
input source @emph{n} (when used with @strong{-a} or @strong{::::}) or with the
@emph{n}'th argument (when used with @strong{-N}). The input will have the
extension removed.

To understand positional replacement strings see @strong{@{}@emph{n}@strong{@}}.

@item @strong{@{}@emph{n}/@strong{@}}
@anchor{@strong{@{}@emph{n}/@strong{@}}}

Basename of argument from input source @emph{n} or the @emph{n}'th argument.
It is a combination of @strong{@{}@emph{n}@strong{@}} and @strong{@{/@}}.

This positional replacement string will be replaced by the input from
input source @emph{n} (when used with @strong{-a} or @strong{::::}) or with the
@emph{n}'th argument (when used with @strong{-N}). The input will have the
directory (if any) removed.

To understand positional replacement strings see @strong{@{}@emph{n}@strong{@}}.

@item @strong{@{}@emph{n}//@strong{@}}
@anchor{@strong{@{}@emph{n}//@strong{@}}}

Dirname of argument from input source @emph{n} or the @emph{n}'th argument.
It is a combination of @strong{@{}@emph{n}@strong{@}} and @strong{@{//@}}.

This positional replacement string will be replaced by the dir of the
input from input source @emph{n} (when used with @strong{-a} or @strong{::::}) or with
the @emph{n}'th argument (when used with @strong{-N}). See @strong{dirname}(1).

To understand positional replacement strings see @strong{@{}@emph{n}@strong{@}}.

@item @strong{@{}@emph{n}/.@strong{@}}
@anchor{@strong{@{}@emph{n}/.@strong{@}}}

Basename of argument from input source @emph{n} or the @emph{n}'th argument
without extension.  It is a combination of @strong{@{}@emph{n}@strong{@}}, @strong{@{/@}}, and
@strong{@{.@}}.

This positional replacement string will be replaced by the input from
input source @emph{n} (when used with @strong{-a} or @strong{::::}) or with the
@emph{n}'th argument (when used with @strong{-N}). The input will have the
directory (if any) and extension removed.

To understand positional replacement strings see @strong{@{}@emph{n}@strong{@}}.

@item @strong{:::} @emph{arguments}
@anchor{@strong{:::} @emph{arguments}}

Use arguments from the command line as input source instead of stdin
(standard input). Unlike other options for GNU @strong{parallel} @strong{:::} is
placed after the @emph{command} and before the arguments.

The following are equivalent:

@verbatim
  (echo file1; echo file2) | parallel gzip
  parallel gzip ::: file1 file2
  parallel gzip {} ::: file1 file2
  parallel --arg-sep ,, gzip {} ,, file1 file2
  parallel --arg-sep ,, gzip ,, file1 file2
  parallel ::: "gzip file1" "gzip file2"
@end verbatim

To avoid treating @strong{:::} as special use @strong{--arg-sep} to set the
argument separator to something else. See also @strong{--arg-sep}.

stdin (standard input) will be passed to the first process run.

If multiple @strong{:::} are given, each group will be treated as an input
source, and all combinations of input sources will be
generated. E.g. ::: 1 2 ::: a b c will result in the combinations
(1,a) (1,b) (1,c) (2,a) (2,b) (2,c). This is useful for replacing
nested for-loops.

@strong{:::} and @strong{::::} can be mixed. So these are equivalent:

@verbatim
  parallel echo {1} {2} {3} ::: 6 7 ::: 4 5 ::: 1 2 3
  parallel echo {1} {2} {3} :::: <(seq 6 7) <(seq 4 5) :::: <(seq 1 3)
  parallel -a <(seq 6 7) echo {1} {2} {3} :::: <(seq 4 5) :::: <(seq 1 3)
  parallel -a <(seq 6 7) -a <(seq 4 5) echo {1} {2} {3} ::: 1 2 3
  seq 6 7 | parallel -a - -a <(seq 4 5) echo {1} {2} {3} ::: 1 2 3
  seq 4 5 | parallel echo {1} {2} {3} :::: <(seq 6 7) - ::: 1 2 3
@end verbatim

@item @strong{::::} @emph{argfiles}
@anchor{@strong{::::} @emph{argfiles}}

Another way to write @strong{-a} @emph{argfile1} @strong{-a} @emph{argfile2} ...

@strong{:::} and @strong{::::} can be mixed.

See @strong{-a}, @strong{:::} and @strong{--xapply}.

@item @strong{--null}
@anchor{@strong{--null}}

@item @strong{-0}
@anchor{@strong{-0}}

Use NUL as delimiter.  Normally input lines will end in \n
(newline). If they end in \0 (NUL), then use this option. It is useful
for processing arguments that may contain \n (newline).

@item @strong{--arg-file} @emph{input-file}
@anchor{@strong{--arg-file} @emph{input-file}}

@item @strong{-a} @emph{input-file}
@anchor{@strong{-a} @emph{input-file}}

Use @emph{input-file} as input source. If you use this option, stdin
(standard input) is given to the first process run.  Otherwise, stdin
(standard input) is redirected from /dev/null.

If multiple @strong{-a} are given, each @emph{input-file} will be treated as an
input source, and all combinations of input sources will be
generated. E.g. The file @strong{foo} contains @strong{1 2}, the file @strong{bar}
contains @strong{a b c}.  @strong{-a foo} @strong{-a bar} will result in the combinations
(1,a) (1,b) (1,c) (2,a) (2,b) (2,c). This is useful for replacing
nested for-loops.

See also @strong{--xapply} and @strong{@{}@emph{n}@strong{@}}.

@item @strong{--arg-file-sep} @emph{sep-str}
@anchor{@strong{--arg-file-sep} @emph{sep-str}}

Use @emph{sep-str} instead of @strong{::::} as separator string between command
and argument files. Useful if @strong{::::} is used for something else by the
command.

See also: @strong{::::}.

@item @strong{--arg-sep} @emph{sep-str}
@anchor{@strong{--arg-sep} @emph{sep-str}}

Use @emph{sep-str} instead of @strong{:::} as separator string. Useful if @strong{:::}
is used for something else by the command.

Also useful if you command uses @strong{:::} but you still want to read
arguments from stdin (standard input): Simply change @strong{--arg-sep} to a
string that is not in the command line.

See also: @strong{:::}.

@item @strong{--basefile} @emph{file}
@anchor{@strong{--basefile} @emph{file}}

@item @strong{--bf} @emph{file}
@anchor{@strong{--bf} @emph{file}}

@emph{file} will be transferred to each sshlogin before a jobs is
started. It will be removed if @strong{--cleanup} is active. The file may be
a script to run or some common base data needed for the jobs.
Multiple @strong{--bf} can be specified to transfer more basefiles. The
@emph{file} will be transferred the same way as @strong{--transfer}.

@item @strong{--basenamereplace} @emph{replace-str}
@anchor{@strong{--basenamereplace} @emph{replace-str}}

@item @strong{--bnr} @emph{replace-str}
@anchor{@strong{--bnr} @emph{replace-str}}

Use the replacement string @emph{replace-str} instead of @strong{@{/@}} for
basename of input line.

@item @strong{--basenameextensionreplace} @emph{replace-str}
@anchor{@strong{--basenameextensionreplace} @emph{replace-str}}

@item @strong{--bner} @emph{replace-str}
@anchor{@strong{--bner} @emph{replace-str}}

Use the replacement string @emph{replace-str} instead of @strong{@{/.@}} for basename of input line without extension.

@item @strong{--bg}
@anchor{@strong{--bg}}

Run command in background thus GNU @strong{parallel} will not wait for
completion of the command before exiting. This is the default if
@strong{--semaphore} is set.

See also: @strong{--fg}, @strong{man sem}

Implies @strong{--semaphore}.

@item @strong{--bibtex}
@anchor{@strong{--bibtex}}

Print the BibTeX entry for GNU @strong{parallel}.

@item @strong{--block} @emph{size}
@anchor{@strong{--block} @emph{size}}

@item @strong{--block-size} @emph{size}
@anchor{@strong{--block-size} @emph{size}}

Size of block in bytes. The size can be postfixed with K, M, G, T, P,
k, m, g, t, or p which would multiply the size with 1024, 1048576,
1073741824, 1099511627776, 1125899906842624, 1000, 1000000,
1000000000, 1000000000000, or 1000000000000000 respectively.

GNU @strong{parallel} tries to meet the block size but can be off by the
length of one record. For performance reasons @emph{size} should be bigger
than a single record.

@emph{size} defaults to 1M.

See @strong{--pipe} for use of this.

@item @strong{--cleanup}
@anchor{@strong{--cleanup}}

Remove transferred files. @strong{--cleanup} will remove the transferred files
on the remote computer after processing is done.

@verbatim
  find log -name '*gz' | parallel \
    --sshlogin server.example.com --transfer --return {.}.bz2 \
    --cleanup "zcat {} | bzip -9 >{.}.bz2"
@end verbatim

With @strong{--transfer} the file transferred to the remote computer will be
removed on the remote computer.  Directories created will not be removed
- even if they are empty.

With @strong{--return} the file transferred from the remote computer will be
removed on the remote computer.  Directories created will not be removed
- even if they are empty.

@strong{--cleanup} is ignored when not used with @strong{--transfer} or @strong{--return}.

@item @strong{--colsep} @emph{regexp}
@anchor{@strong{--colsep} @emph{regexp}}

@item @strong{-C} @emph{regexp}
@anchor{@strong{-C} @emph{regexp}}

Column separator. The input will be treated as a table with @emph{regexp}
separating the columns. The n'th column can be access using
@strong{@{}@emph{n}@strong{@}} or @strong{@{}@emph{n}.@strong{@}}. E.g. @strong{@{3@}} is the 3rd column.

@strong{--colsep} implies @strong{--trim rl}.

@emph{regexp} is a Perl Regular Expression:
http://perldoc.perl.org/perlre.html

@item @strong{--delimiter} @emph{delim}
@anchor{@strong{--delimiter} @emph{delim}}

@item @strong{-d} @emph{delim}
@anchor{@strong{-d} @emph{delim}}

Input items are terminated by the specified character.  Quotes and
backslash are not special; every character in the input is taken
literally.  Disables the end-of-file string, which is treated like any
other argument.  This can be used when the input consists of simply
newline-separated items, although it is almost always better to design
your program to use --null where this is possible.  The specified
delimiter may be a single character, a C-style character escape such
as \n, or an octal or hexadecimal escape code.  Octal and
hexadecimal escape codes are understood as for the printf command.
Multibyte characters are not supported.

@item @strong{--dirnamereplace} @emph{replace-str}
@anchor{@strong{--dirnamereplace} @emph{replace-str}}

@item @strong{--dnr} @emph{replace-str}
@anchor{@strong{--dnr} @emph{replace-str}}

Use the replacement string @emph{replace-str} instead of @strong{@{//@}} for
dirname of input line.

@item @strong{-E} @emph{eof-str}
@anchor{@strong{-E} @emph{eof-str}}

Set the end of file string to eof-str.  If the end of file string
occurs as a line of input, the rest of the input is ignored.  If
neither @strong{-E} nor @strong{-e} is used, no end of file string is used.

@item @strong{--dry-run}
@anchor{@strong{--dry-run}}

Print the job to run on stdout (standard output), but do not run the
job. Use @strong{-v -v} to include the ssh/rsync wrapping if the job would
be run on a remote computer. Do not count on this literaly, though, as
the job may be scheduled on another computer or the local computer if
: is in the list.

@item @strong{--eof}[=@emph{eof-str}]
@anchor{@strong{--eof}[=@emph{eof-str}]}

@item @strong{-e}[@emph{eof-str}]
@anchor{@strong{-e}[@emph{eof-str}]}

This option is a synonym for the @strong{-E} option.  Use @strong{-E} instead,
because it is POSIX compliant for @strong{xargs} while this option is not.
If @emph{eof-str} is omitted, there is no end of file string.  If neither
@strong{-E} nor @strong{-e} is used, no end of file string is used.

@item @strong{--env} @emph{var} (alpha testing)
@anchor{@strong{--env} @emph{var} (alpha testing)}

Copy environment variable @emph{var}. This will copy @emph{var} to the
environment that the command is run in. This is especially useful for
remote environments.

Caveat: If @emph{var} contains newline ('\n') the value is messed up.

@item @strong{--eta}
@anchor{@strong{--eta}}

Show the estimated number of seconds before finishing. This forces GNU
@strong{parallel} to read all jobs before starting to find the number of
jobs. GNU @strong{parallel} normally only reads the next job to run.
Implies @strong{--progress}.

@item @strong{--fg}
@anchor{@strong{--fg}}

Run command in foreground thus GNU @strong{parallel} will wait for
completion of the command before exiting.

See also: @strong{--bg}, @strong{man sem}

Implies @strong{--semaphore}.

@item @strong{--filter-hosts} (alpha testing)
@anchor{@strong{--filter-hosts} (alpha testing)}

Remove down hosts. For each remote host: check that login through ssh
works. If not: do not use this host.

Currently you can <i>not</i> put @strong{--filter-hosts} in a profile,
$PARALLEL, /etc/parallel/config or similar. This is because GNU
@strong{parallel} uses GNU @strong{parallel} to compute this, so you will get an
infinite loop. This will likely be fixed in a later release.

@item @strong{--gnu}
@anchor{@strong{--gnu}}

Behave like GNU @strong{parallel}. If @strong{--tollef} and @strong{--gnu} are both set,
@strong{--gnu} takes precedence.

@item @strong{--group}
@anchor{@strong{--group}}

Group output. Output from each jobs is grouped together and is only
printed when the command is finished. stderr (standard error) first
followed by stdout (standard output). This takes some CPU time. In
rare situations GNU @strong{parallel} takes up lots of CPU time and if it is
acceptable that the outputs from different commands are mixed
together, then disabling grouping with @strong{-u} can speedup GNU
@strong{parallel} by a factor of 10.

@strong{--group} is the default. Can be reversed with @strong{-u}.

@item @strong{--help}
@anchor{@strong{--help}}

@item @strong{-h}
@anchor{@strong{-h}}

Print a summary of the options to GNU @strong{parallel} and exit.

@item @strong{--halt-on-error} <0|1|2>
@anchor{@strong{--halt-on-error} <0|1|2>}

@item @strong{--halt} <0|1|2>
@anchor{@strong{--halt} <0|1|2>}

@table @asis
@item 0
@anchor{0}

Do not halt if a job fails. Exit status will be the number of jobs
failed. This is the default.

@item 1
@anchor{1}

Do not start new jobs if a job fails, but complete the running jobs
including cleanup. The exit status will be the exit status from the
last failing job.

@item 2
@anchor{2}

Kill off all jobs immediately and exit without cleanup. The exit
status will be the exit status from the failing job.

@end table

@item @strong{--header} @emph{regexp}
@anchor{@strong{--header} @emph{regexp}}

Use upto regexp as header. For normal usage the matched header
(typically the first line: @strong{--header '\n'}) will be split using
@strong{--colsep} (which will default to '\t') and column names can be used
as replacement variables: @strong{@{column name@}}. For @strong{--pipe} the matched
header will be prepended to each output.

@strong{--header :} is an alias for @strong{--header '\n'}.

@item @strong{-I} @emph{replace-str}
@anchor{@strong{-I} @emph{replace-str}}

Use the replacement string @emph{replace-str} instead of @{@}.

@item @strong{--replace}[=@emph{replace-str}]
@anchor{@strong{--replace}[=@emph{replace-str}]}

@item @strong{-i}[@emph{replace-str}]
@anchor{@strong{-i}[@emph{replace-str}]}

This option is a synonym for @strong{-I}@emph{replace-str} if @emph{replace-str} is
specified, and for @strong{-I}@{@} otherwise.  This option is deprecated;
use @strong{-I} instead.

@item @strong{--joblog} @emph{logfile}
@anchor{@strong{--joblog} @emph{logfile}}

Logfile for executed jobs. Save a list of the executed jobs to
@emph{logfile} in the following TAB separated format: sequence number,
sshlogin, start time as seconds since epoch, run time in seconds,
bytes in files transferred, bytes in files returned, exit status,
and command run.

To convert the times into ISO-8601 strict do:

@strong{perl -a -F"\t" -ne 'chomp($F[2]=`date -d \@@$F[2] +%FT%T`); print join("\t",@@F)'}

See also @strong{--resume}.

@item @strong{--jobs} @emph{N}
@anchor{@strong{--jobs} @emph{N}}

@item @strong{-j} @emph{N}
@anchor{@strong{-j} @emph{N}}

@item @strong{--max-procs} @emph{N}
@anchor{@strong{--max-procs} @emph{N}}

@item @strong{-P} @emph{N}
@anchor{@strong{-P} @emph{N}}

Number of jobslots. Run up to N jobs in parallel.  0 means as many as
possible. Default is 100% which will run one job per CPU core.

If @strong{--semaphore} is set default is 1 thus making a mutex.

@item @strong{--jobs} @emph{+N}
@anchor{@strong{--jobs} @emph{+N}}

@item @strong{-j} @emph{+N}
@anchor{@strong{-j} @emph{+N}}

@item @strong{--max-procs} @emph{+N}
@anchor{@strong{--max-procs} @emph{+N}}

@item @strong{-P} @emph{+N}
@anchor{@strong{-P} @emph{+N}}

Add N to the number of CPU cores.  Run this many jobs in parallel.
See also @strong{--use-cpus-instead-of-cores}.

@item @strong{--jobs} @emph{-N}
@anchor{@strong{--jobs} @emph{-N}}

@item @strong{-j} @emph{-N}
@anchor{@strong{-j} @emph{-N}}

@item @strong{--max-procs} @emph{-N}
@anchor{@strong{--max-procs} @emph{-N}}

@item @strong{-P} @emph{-N}
@anchor{@strong{-P} @emph{-N}}

Subtract N from the number of CPU cores.  Run this many jobs in parallel.
If the evaluated number is less than 1 then 1 will be used.  See also
@strong{--use-cpus-instead-of-cores}.

@item @strong{--jobs} @emph{N}%
@anchor{@strong{--jobs} @emph{N}%}

@item @strong{-j} @emph{N}%
@anchor{@strong{-j} @emph{N}%}

@item @strong{--max-procs} @emph{N}%
@anchor{@strong{--max-procs} @emph{N}%}

@item @strong{-P} @emph{N}%
@anchor{@strong{-P} @emph{N}%}

Multiply N% with the number of CPU cores.  Run this many jobs in parallel.
If the evaluated number is less than 1 then 1 will be used.  See also
@strong{--use-cpus-instead-of-cores}.

@item @strong{--jobs} @emph{procfile}
@anchor{@strong{--jobs} @emph{procfile}}

@item @strong{-j} @emph{procfile}
@anchor{@strong{-j} @emph{procfile}}

@item @strong{--max-procs} @emph{procfile}
@anchor{@strong{--max-procs} @emph{procfile}}

@item @strong{-P} @emph{procfile}
@anchor{@strong{-P} @emph{procfile}}

Read parameter from file. Use the content of @emph{procfile} as parameter
for @emph{-j}. E.g. @emph{procfile} could contain the string 100% or +2 or
10. If @emph{procfile} is changed when a job completes, @emph{procfile} is
read again and the new number of jobs is computed. If the number is
lower than before, running jobs will be allowed to finish but new jobs
will not be started until the wanted number of jobs has been reached.
This makes it possible to change the number of simultaneous running
jobs while GNU @strong{parallel} is running.

@item @strong{--keep-order}
@anchor{@strong{--keep-order}}

@item @strong{-k}
@anchor{@strong{-k}}

Keep sequence of output same as the order of input. Normally the
output of a job will be printed as soon as the job completes. Try this
to see the difference:

@verbatim
  parallel -j4 sleep {}\; echo {} ::: 2 1 4 3
  parallel -j4 -k sleep {}\; echo {} ::: 2 1 4 3
@end verbatim

@item @strong{-L} @emph{max-lines}
@anchor{@strong{-L} @emph{max-lines}}

When used with @strong{--pipe}: Read records of @emph{max-lines} (alpha testing).

When used otherwise: Use at most @emph{max-lines} nonblank input lines per
command line.  Trailing blanks cause an input line to be logically
continued on the next input line.

@strong{-L 0} means read one line, but insert 0 arguments on the command
line.

Implies @strong{-X} unless @strong{-m}, @strong{--xargs}, or @strong{--pipe} is set.

@item @strong{--max-lines}[=@emph{max-lines}]
@anchor{@strong{--max-lines}[=@emph{max-lines}]}

@item @strong{-l}[@emph{max-lines}]
@anchor{@strong{-l}[@emph{max-lines}]}

When used with @strong{--pipe}: Read records of @emph{max-lines} (alpha testing).

When used otherwise: Synonym for the @strong{-L} option.  Unlike @strong{-L}, the
@emph{max-lines} argument is optional.  If @emph{max-lines} is not specified,
it defaults to one.  The @strong{-l} option is deprecated since the POSIX
standard specifies @strong{-L} instead.

@strong{-l 0} is an alias for @strong{-l 1}.

Implies @strong{-X} unless @strong{-m}, @strong{--xargs}, or @strong{--pipe} is set.

@item @strong{--load} @emph{max-load}
@anchor{@strong{--load} @emph{max-load}}

Do not start new jobs on a given computer unless the load is less than
@emph{max-load}. @emph{max-load} uses the same syntax as @strong{--jobs}, so @emph{100%}
for one per CPU is a valid setting. Only difference is 0 which is
interpreted as 0.01.

The load average is only sampled every 10 seconds using @strong{uptime} to
avoid stressing small computers. Only the first (1 minute) load is
used.

@item @strong{--controlmaster} (experimental)
@anchor{@strong{--controlmaster} (experimental)}

@item @strong{-M} (experimental)
@anchor{@strong{-M} (experimental)}

Use ssh's ControlMaster to make ssh connections faster. Useful if jobs
run remote and are very fast to run. This is disabled for sshlogins
that specify their own ssh command.

@item @strong{--xargs}
@anchor{@strong{--xargs}}

Multiple arguments. Insert as many arguments as the command line
length permits.

If @strong{@{@}} is not used the arguments will be appended to the
line.  If @strong{@{@}} is used multiple times each @strong{@{@}} will be replaced
with all the arguments.

Support for @strong{--xargs} with @strong{--sshlogin} is limited and may fail.

See also @strong{-X} for context replace. If in doubt use @strong{-X} as that will
most likely do what is needed.

@item @strong{-m}
@anchor{@strong{-m}}

Multiple arguments. Insert as many arguments as the command line
length permits. If multiple jobs are being run in parallel: distribute
the arguments evenly among the jobs. Use @strong{-j1} to avoid this.

If @strong{@{@}} is not used the arguments will be appended to the
line.  If @strong{@{@}} is used multiple times each @strong{@{@}} will be replaced
with all the arguments.

Support for @strong{-m} with @strong{--sshlogin} is limited and may fail.

See also @strong{-X} for context replace. If in doubt use @strong{-X} as that will
most likely do what is needed.

@item @strong{--minversion} @emph{version}
@anchor{@strong{--minversion} @emph{version}}

Print the version GNU @strong{parallel} and exit.  If the current version of
GNU @strong{parallel} is less than @emph{version} the exit code is
255. Otherwise it is 0.

This is useful for scripts that depend on features only available from
a certain version of GNU @strong{parallel}.

@item @strong{--nonall}
@anchor{@strong{--nonall}}

@strong{--onall} with no arguments. Run the command on all computers given
with @strong{--sshlogin} but take no arguments. GNU @strong{parallel} will log
into @strong{--jobs} number of computers in parallel and run the job on the
computer. @strong{-j} adjusts how many computers to log into in parallel.

This is useful for running the same command (e.g. uptime) on a list of
servers.

@item @strong{--onall}
@anchor{@strong{--onall}}

Run all the jobs on all computers given with @strong{--sshlogin}. GNU
@strong{parallel} will log into @strong{--jobs} number of computers in parallel
and run one job at a time on the computer. The order of the jobs will
not be changed, but some computers may finish before others. @strong{-j}
adjusts how many computers to log into in parallel.

When using @strong{--group} the output will be grouped by each server, so
all the output from one server will be grouped together.

@item @strong{--output-as-files}
@anchor{@strong{--output-as-files}}

@item @strong{--outputasfiles}
@anchor{@strong{--outputasfiles}}

@item @strong{--files}
@anchor{@strong{--files}}

Instead of printing the output to stdout (standard output) the output
of each job is saved in a file and the filename is then printed.

@item @strong{--pipe}
@anchor{@strong{--pipe}}

@item @strong{--spreadstdin}
@anchor{@strong{--spreadstdin}}

Spread input to jobs on stdin (standard input). Read a block of data
from stdin (standard input) and give one block of data as input to one
job.

The block size is determined by @strong{--block}. The strings @strong{--recstart}
and @strong{--recend} tell GNU @strong{parallel} how a record starts and/or
ends. The block read will have the final partial record removed before
the block is passed on to the job. The partial record will be
prepended to next block.

If @strong{--recstart} is given this will be used to split at record start.

If @strong{--recend} is given this will be used to split at record end.

If both @strong{--recstart} and @strong{--recend} are given both will have to
match to find a split position.

If neither @strong{--recstart} nor @strong{--recend} are given @strong{--recend}
defaults to '\n'. To have no record separator use @strong{--recend ""}.

@strong{--files} is often used with @strong{--pipe}.

@item @strong{--plain} (alpha testing)
@anchor{@strong{--plain} (alpha testing)}

Ignore any @strong{--profile}, $PARALLEL, ~/.parallel/config, and
@strong{--tollef} to get full control on the command line (used by GNU
@strong{parallel} internally when called with @strong{--sshlogin}).

@item @strong{--progress}
@anchor{@strong{--progress}}

Show progress of computations. List the computers involved in the task
with number of CPU cores detected and the max number of jobs to
run. After that show progress for each computer: number of running
jobs, number of completed jobs, and percentage of all jobs done by
this computer. The percentage will only be available after all jobs
have been scheduled as GNU @strong{parallel} only read the next job when
ready to schedule it - this is to avoid wasting time and memory by
reading everything at startup.

By sending GNU @strong{parallel} SIGUSR2 you can toggle turning on/off
@strong{--progress} on a running GNU @strong{parallel} process.

See also: @strong{--eta}

@item @strong{--max-args}=@emph{max-args}
@anchor{@strong{--max-args}=@emph{max-args}}

@item @strong{-n} @emph{max-args}
@anchor{@strong{-n} @emph{max-args}}

Use at most @emph{max-args} arguments per command line.  Fewer than
@emph{max-args} arguments will be used if the size (see the @strong{-s} option)
is exceeded, unless the @strong{-x} option is given, in which case
GNU @strong{parallel} will exit.

@strong{-n 0} means read one argument, but insert 0 arguments on the command
line.

Implies @strong{-X} unless @strong{-m} is set.

@item @strong{--max-replace-args}=@emph{max-args}
@anchor{@strong{--max-replace-args}=@emph{max-args}}

@item @strong{-N} @emph{max-args}
@anchor{@strong{-N} @emph{max-args}}

Use at most @emph{max-args} arguments per command line. Like @strong{-n} but
also makes replacement strings @strong{@{1@}} .. @strong{@{}@emph{max-args}@strong{@}} that
represents argument 1 .. @emph{max-args}. If too few args the @strong{@{}@emph{n}@strong{@}} will
be empty.

@strong{-N 0} means read one argument, but insert 0 arguments on the command
line.

This will set the owner of the homedir to the user:

@strong{tr ':' '\n' < /etc/passwd | parallel -N7 chown @{1@} @{6@}}

Implies @strong{-X} unless @strong{-m} or @strong{--pipe} is set.

When used with @strong{--pipe} @strong{-N} is the number of records to read. This
is much slower than @strong{--block} so avoid it if performance is
important.

@item @strong{--max-line-length-allowed}
@anchor{@strong{--max-line-length-allowed}}

Print the maximal number of characters allowed on the command line and
exit (used by GNU @strong{parallel} itself to determine the line length
on remote computers).

@item @strong{--number-of-cpus}
@anchor{@strong{--number-of-cpus}}

Print the number of physical CPUs and exit (used by GNU @strong{parallel}
itself to determine the number of physical CPUs on remote computers).

@item @strong{--number-of-cores}
@anchor{@strong{--number-of-cores}}

Print the number of CPU cores and exit (used by GNU @strong{parallel} itself
to determine the number of CPU cores on remote computers).

@item @strong{--nice} @emph{niceness}
@anchor{@strong{--nice} @emph{niceness}}

Run the command at this niceness. For simple commands you can just add
@strong{nice} in front of the command. But if the command consists of more
sub commands (Like: ls|wc) then prepending @strong{nice} will not always
work. @strong{--nice} will make sure all sub commands are niced.

@item @strong{--interactive}
@anchor{@strong{--interactive}}

@item @strong{-p}
@anchor{@strong{-p}}

Prompt the user about whether to run each command line and read a line
from the terminal.  Only run the command line if the response starts
with 'y' or 'Y'.  Implies @strong{-t}.

@item @strong{--profile} @emph{profilename}
@anchor{@strong{--profile} @emph{profilename}}

@item @strong{-J} @emph{profilename}
@anchor{@strong{-J} @emph{profilename}}

Use profile @emph{profilename} for options. This is useful if you want to
have multiple profiles. You could have one profile for running jobs in
parallel on the local computer and a different profile for running jobs
on remote computers. See the section PROFILE FILES for examples.

@emph{profilename} corresponds to the file ~/.parallel/@emph{profilename}.

You can give multiple profiles by repeating @strong{--profile}. If parts of
the profiles conflict, the later ones will be used.

Default: config

@item @strong{--quote}
@anchor{@strong{--quote}}

@item @strong{-q}
@anchor{@strong{-q}}

Quote @emph{command}.  This will quote the command line so special
characters are not interpreted by the shell. See the section
QUOTING. Most people will never need this.  Quoting is disabled by
default.

@item @strong{--no-run-if-empty}
@anchor{@strong{--no-run-if-empty}}

@item @strong{-r}
@anchor{@strong{-r}}

If the stdin (standard input) only contains whitespace, do not run the command.

If used with @strong{--pipe} this is slow.

@item @strong{--recstart} @emph{startstring}
@anchor{@strong{--recstart} @emph{startstring}}

@item @strong{--recend} @emph{endstring}
@anchor{@strong{--recend} @emph{endstring}}

If @strong{--recstart} is given @emph{startstring} will be used to split at record start.

If @strong{--recend} is given @emph{endstring} will be used to split at record end.

If both @strong{--recstart} and @strong{--recend} are given the combined string
@emph{endstring}@emph{startstring} will have to match to find a split
position. This is useful if either @emph{startstring} or @emph{endstring}
match in the middle of a record.

If neither @strong{--recstart} nor @strong{--recend} are given then @strong{--recend}
defaults to '\n'. To have no record separator use @strong{--recend ""}.

@strong{--recstart} and @strong{--recend} are used with @strong{--pipe}.

Use @strong{--regexp} to interpret @strong{--recstart} and @strong{--recend} as regular
expressions. This is slow, however.

@item @strong{--regexp}
@anchor{@strong{--regexp}}

Use @strong{--regexp} to interpret @strong{--recstart} and @strong{--recend} as regular
expressions. This is slow, however.

@item @strong{--remove-rec-sep}
@anchor{@strong{--remove-rec-sep}}

@item @strong{--removerecsep}
@anchor{@strong{--removerecsep}}

@item @strong{--rrs}
@anchor{@strong{--rrs}}

Remove the text matched by @strong{--recstart} and @strong{--recend} before piping
it to the command.

Only used with @strong{--pipe}.

@item @strong{--results} @emph{prefix} (alpha testing)
@anchor{@strong{--results} @emph{prefix} (alpha testing)}

@item @strong{--res} @emph{prefix} (alpha testing)
@anchor{@strong{--res} @emph{prefix} (alpha testing)}

Results in files named by tab separated arguments. Save the output
into files. The file names will be prefixed with @emph{prefix} which can
contain a path with a prefix string. The file with output from stdout
(standard output) will prefixed with '@emph{prefix}stdout'.  The file
with output from stderr (standard error) will prefixed with
'@emph{prefix}stderr'.

The postfix is the header of the input source (if using @strong{--header :})
or the number of the input source followed by the value of the input
source. This is repeated for every input source and is separated by
TAB (\t).

E.g:

@verbatim
  parallel --header : --results foo/bar echo {a} {b} ::: a I II ::: b III IIII
@end verbatim

will generate the files:

@verbatim
  foo/barstderr a       I       b       III
  foo/barstderr a       I       b       IIII
  foo/barstderr a       II      b       III
  foo/barstderr a       II      b       IIII
  foo/barstdout a       I       b       III
  foo/barstdout a       I       b       IIII
  foo/barstdout a       II      b       III
  foo/barstdout a       II      b       IIII
@end verbatim

and

@verbatim
  parallel --results foo/bar echo {1} {2} ::: 1 2 ::: 3 4
@end verbatim

will generate the files:

@verbatim
  foo/barstderr 1       I       2       III
  foo/barstderr 1       I       2       IIII
  foo/barstderr 1       II      2       III
  foo/barstderr 1       II      2       IIII
  foo/barstdout 1       I       2       III
  foo/barstdout 1       I       2       IIII
  foo/barstdout 1       II      2       III
  foo/barstdout 1       II      2       IIII
@end verbatim

where all spaces are TABs (\t);.

See also @strong{--files}, @strong{--header}, @strong{--joblog}.

@item @strong{--resume}
@anchor{@strong{--resume}}

Resumes from the last unfinished job. By reading @strong{--joblog} GNU
@strong{parallel} will figure out the last unfinished job and continue from
there. As GNU @strong{parallel} only looks at the sequence numbers in
@strong{--joblog} then the input, the command, and @strong{--joblog} all have to
remain unchanged; otherwise GNU @strong{parallel} may run wrong commands.

See also: @strong{--joblog}.

@item @strong{--retries} @emph{n}
@anchor{@strong{--retries} @emph{n}}

If a job fails, retry it on another computer. Do this @emph{n} times. If
there are fewer than @emph{n} computers in @strong{--sshlogin} GNU @strong{parallel} will
re-use the computers. This is useful if some jobs fail for no apparent
reason (such as network failure).

@item @strong{--return} @emph{filename}
@anchor{@strong{--return} @emph{filename}}

Transfer files from remote computers. @strong{--return} is used with
@strong{--sshlogin} when the arguments are files on the remote computers. When
processing is done the file @emph{filename} will be transferred
from the remote computer using @strong{rsync} and will be put relative to
the default login dir. E.g.

@verbatim
  echo foo/bar.txt | parallel \
    --sshlogin server.example.com --return {.}.out touch {.}.out
@end verbatim

This will transfer the file @emph{$HOME/foo/bar.out} from the computer
@emph{server.example.com} to the file @emph{foo/bar.out} after running
@strong{touch foo/bar.out} on @emph{server.example.com}.

@verbatim
  echo /tmp/foo/bar.txt | parallel \
    --sshlogin server.example.com --return {.}.out touch {.}.out
@end verbatim

This will transfer the file @emph{/tmp/foo/bar.out} from the computer
@emph{server.example.com} to the file @emph{/tmp/foo/bar.out} after running
@strong{touch /tmp/foo/bar.out} on @emph{server.example.com}.

Multiple files can be transferred by repeating the options multiple
times:

@verbatim
  echo /tmp/foo/bar.txt | \
    parallel --sshlogin server.example.com \
    --return {.}.out --return {.}.out2 touch {.}.out {.}.out2
@end verbatim

@strong{--return} is often used with @strong{--transfer} and @strong{--cleanup}.

@strong{--return} is ignored when used with @strong{--sshlogin :} or when not used
with @strong{--sshlogin}.

@item @strong{--max-chars}=@emph{max-chars}
@anchor{@strong{--max-chars}=@emph{max-chars}}

@item @strong{-s} @emph{max-chars}
@anchor{@strong{-s} @emph{max-chars}}

Use at most @emph{max-chars} characters per command line, including the
command and initial-arguments and the terminating nulls at the ends of
the argument strings.  The largest allowed value is system-dependent,
and is calculated as the argument length limit for exec, less the size
of your environment.  The default value is the maximum.

Implies @strong{-X} unless @strong{-m} is set.

@item @strong{--show-limits}
@anchor{@strong{--show-limits}}

Display the limits on the command-line length which are imposed by the
operating system and the @strong{-s} option.  Pipe the input from /dev/null
(and perhaps specify --no-run-if-empty) if you don't want GNU @strong{parallel}
to do anything.

@item @strong{--semaphore}
@anchor{@strong{--semaphore}}

Work as a counting semaphore. @strong{--semaphore} will cause GNU
@strong{parallel} to start @emph{command} in the background. When the number of
simultaneous jobs is reached, GNU @strong{parallel} will wait for one of
these to complete before starting another command.

@strong{--semaphore} implies @strong{--bg} unless @strong{--fg} is specified.

@strong{--semaphore} implies @strong{--semaphorename `tty`} unless
@strong{--semaphorename} is specified.

Used with @strong{--fg}, @strong{--wait}, and @strong{--semaphorename}.

The command @strong{sem} is an alias for @strong{parallel --semaphore}.

See also: @strong{man sem}

@item @strong{--semaphorename} @emph{name}
@anchor{@strong{--semaphorename} @emph{name}}

@item @strong{--id} @emph{name}
@anchor{@strong{--id} @emph{name}}

Use @strong{name} as the name of the semaphore. Default is the name of the
controlling tty (output from @strong{tty}).

The default normally works as expected when used interactively, but
when used in a script @emph{name} should be set. @emph{$$} or @emph{my_task_name}
are often a good value.

The semaphore is stored in ~/.parallel/semaphores/

Implies @strong{--semaphore}.

See also: @strong{man sem}

@item @strong{--semaphoretimeout} @emph{secs} (not implemented)
@anchor{@strong{--semaphoretimeout} @emph{secs} (not implemented)}

If the semaphore is not released within secs seconds, take it anyway.

Implies @strong{--semaphore}.

See also: @strong{man sem}

@item @strong{--seqreplace} @emph{replace-str}
@anchor{@strong{--seqreplace} @emph{replace-str}}

Use the replacement string @emph{replace-str} instead of @strong{@{#@}} for
job sequence number.

@item @strong{--shellquote}
@anchor{@strong{--shellquote}}

Does not run the command but quotes it. Useful for making quoted
composed commands for GNU @strong{parallel}.

@item @strong{--skip-first-line}
@anchor{@strong{--skip-first-line}}

Do not use the first line of input (used by GNU @strong{parallel} itself
when called with @strong{--shebang}).

@item @strong{-S} @emph{[ncpu/]sshlogin[,[ncpu/]sshlogin[,...]]}
@anchor{@strong{-S} @emph{[ncpu/]sshlogin[@comma{}[ncpu/]sshlogin[@comma{}...]]}}

@item @strong{--sshlogin} @emph{[ncpu/]sshlogin[,[ncpu/]sshlogin[,...]]}
@anchor{@strong{--sshlogin} @emph{[ncpu/]sshlogin[@comma{}[ncpu/]sshlogin[@comma{}...]]}}

Distribute jobs to remote computers. The jobs will be run on a list of
remote computers.  GNU @strong{parallel} will determine the number of CPU
cores on the remote computers and run the number of jobs as specified by
@strong{-j}.  If the number @emph{ncpu} is given GNU @strong{parallel} will use this
number for number of CPU cores on the host. Normally @emph{ncpu} will not
be needed.

An @emph{sshlogin} is of the form:

@verbatim
  [sshcommand [options]][username@]hostname
@end verbatim

The sshlogin must not require a password.

The sshlogin ':' is special, it means 'no ssh' and will therefore run
on the local computer.

The sshlogin '..' is special, it read sshlogins from ~/.parallel/sshloginfile

The sshlogin '-' is special, too, it read sshlogins from stdin
(standard input).

To specify more sshlogins separate the sshlogins by comma or repeat
the options multiple times.

For examples: see @strong{--sshloginfile}.

The remote host must have GNU @strong{parallel} installed.

@strong{--sshlogin} is known to cause problems with @strong{-m} and @strong{-X}.

@strong{--sshlogin} is often used with @strong{--transfer}, @strong{--return},
@strong{--cleanup}, and @strong{--trc}.

@item @strong{--sshloginfile} @emph{filename}
@anchor{@strong{--sshloginfile} @emph{filename}}

@item @strong{--slf} @emph{filename}
@anchor{@strong{--slf} @emph{filename}}

File with sshlogins. The file consists of sshlogins on separate
lines. Empty lines and lines starting with '#' are ignored. Example:

@verbatim
  server.example.com
  username@server2.example.com
  8/my-8-core-server.example.com
  2/my_other_username@my-dualcore.example.net
  # This server has SSH running on port 2222
  ssh -p 2222 server.example.net
  4/ssh -p 2222 quadserver.example.net
  # Use a different ssh program
  myssh -p 2222 -l myusername hexacpu.example.net
  # Use a different ssh program with default number of cores
  //usr/local/bin/myssh -p 2222 -l myusername hexacpu.example.net
  # Use a different ssh program with 6 cores
  6//usr/local/bin/myssh -p 2222 -l myusername hexacpu.example.net
  # Assume 16 cores on the local computer
  16/:
@end verbatim

When using a different ssh program the last argument must be the hostname.

Multiple @strong{--sshloginfile} are allowed.

The sshloginfile '..' is special, it read sshlogins from
~/.parallel/sshloginfile

The sshloginfile '.' is special, it read sshlogins from
/etc/parallel/sshloginfile

The sshloginfile '-' is special, too, it read sshlogins from stdin
(standard input).

@item @strong{--noswap}
@anchor{@strong{--noswap}}

Do not start new jobs on a given computer if there is both swap-in and
swap-out activity.

The swap activity is only sampled every 10 seconds as the sampling
takes 1 second to do.

Swap activity is computed as (swap-in)*(swap-out) which in practice is
a good value: swapping out is not a problem, swapping in is not a
problem, but both swapping in and out usually indicates a problem.

@item @strong{--silent}
@anchor{@strong{--silent}}

Silent.  The job to be run will not be printed. This is the default.
Can be reversed with @strong{-v}.

@item @strong{--tty}
@anchor{@strong{--tty}}

Open terminal tty. If GNU @strong{parallel} is used for starting an
interactive program then this option may be needed. It will start only
one job at a time (i.e. @strong{-j1}), not buffer the output (i.e. @strong{-u}),
and it will open a tty for the job. When the job is done, the next job
will get the tty.

@item @strong{--tag}
@anchor{@strong{--tag}}

Tag lines with arguments. Each output line will be prepended with the
arguments and TAB (\t). When combined with @strong{--onall} or @strong{--nonall}
the lines will be prepended with the sshlogin instead.

@strong{--tag} is ignored when using @strong{-u}.

@item @strong{--tagstring} @emph{str}
@anchor{@strong{--tagstring} @emph{str}}

Tag lines with a string. Each output line will be prepended with
@emph{str} and TAB (\t). @emph{str} can contain replacement strings such as
@{@}.

@strong{--tagstring} is ignored when using @strong{-u}, @strong{--onall}, and @strong{--nonall}.

@item @strong{--tmpdir} @emph{dirname}
@anchor{@strong{--tmpdir} @emph{dirname}}

Directory for temporary files. GNU @strong{parallel} normally buffers output
into temporary files in /tmp. By setting @strong{--tmpdir} you can use a
different dir for the files. Setting @strong{--tmpdir} is equivalent to
setting $TMPDIR.

@item @strong{--timeout} @emph{sec}
@anchor{@strong{--timeout} @emph{sec}}

Time out for command. If the command runs for longer than @emph{sec}
seconds it will get killed with SIGTERM, followed by SIGTERM 200 ms
later, followed by SIGKILL 200 ms later.

@item @strong{--tollef}
@anchor{@strong{--tollef}}

Make GNU @strong{parallel} behave more like Tollef's parallel command. It
activates @strong{-u}, @strong{-q}, and @strong{--arg-sep --}. It also causes @strong{-l} to
change meaning to @strong{--load}.

Not giving '--' is unsupported.

@strong{Do not use --tollef unless you know what you are doing}.

To override use @strong{--gnu}.

@item @strong{--verbose}
@anchor{@strong{--verbose}}

@item @strong{-t}
@anchor{@strong{-t}}

Print the job to be run on stderr (standard error).

See also @strong{-v} and @strong{-p}.

@item @strong{--transfer}
@anchor{@strong{--transfer}}

Transfer files to remote computers. @strong{--transfer} is used with
@strong{--sshlogin} when the arguments are files and should be transferred to
the remote computers. The files will be transferred using @strong{rsync} and
will be put relative to the default login dir. E.g.

@verbatim
  echo foo/bar.txt | parallel \
    --sshlogin server.example.com --transfer wc
@end verbatim

This will transfer the file @emph{foo/bar.txt} to the computer
@emph{server.example.com} to the file @emph{$HOME/foo/bar.txt} before running
@strong{wc foo/bar.txt} on @emph{server.example.com}.

@verbatim
  echo /tmp/foo/bar.txt | parallel \
    --sshlogin server.example.com --transfer wc
@end verbatim

This will transfer the file @emph{foo/bar.txt} to the computer
@emph{server.example.com} to the file @emph{/tmp/foo/bar.txt} before running
@strong{wc /tmp/foo/bar.txt} on @emph{server.example.com}.

@strong{--transfer} is often used with @strong{--return} and @strong{--cleanup}.

@strong{--transfer} is ignored when used with @strong{--sshlogin :} or when not used with @strong{--sshlogin}.

@item @strong{--trc} @emph{filename}
@anchor{@strong{--trc} @emph{filename}}

Transfer, Return, Cleanup. Short hand for:

@strong{--transfer} @strong{--return} @emph{filename} @strong{--cleanup}

@item @strong{--trim} <n|l|r|lr|rl>
@anchor{@strong{--trim} <n|l|r|lr|rl>}

Trim white space in input.

@table @asis
@item n
@anchor{n}

No trim. Input is not modified. This is the default.

@item l
@anchor{l}

Left trim. Remove white space from start of input. E.g. " a bc " -> "a bc ".

@item r
@anchor{r}

Right trim. Remove white space from end of input. E.g. " a bc " -> " a bc".

@item lr
@anchor{lr}

@item rl
@anchor{rl}

Both trim. Remove white space from both start and end of input. E.g. "
a bc " -> "a bc". This is the default if @strong{--colsep} is used.

@end table

@item @strong{--ungroup}
@anchor{@strong{--ungroup}}

@item @strong{-u}
@anchor{@strong{-u}}

Ungroup output.  Output is printed as soon as possible and by passes
GNU @strong{parallel} internal processing. This may cause output from
different commands to be mixed thus should only be used if you do not
care about the output. Compare these:

@strong{parallel -j0 'sleep @{@};echo -n start@{@};sleep @{@};echo @{@}end' ::: 1 2 3 4}

@strong{parallel -u -j0 'sleep @{@};echo -n start@{@};sleep @{@};echo @{@}end' ::: 1 2 3 4}

It also disables @strong{--tag}. GNU @strong{parallel} runs faster with @strong{-u}. Can
be reversed with @strong{--group}.

@item @strong{--extensionreplace} @emph{replace-str}
@anchor{@strong{--extensionreplace} @emph{replace-str}}

@item @strong{--er} @emph{replace-str}
@anchor{@strong{--er} @emph{replace-str}}

Use the replacement string @emph{replace-str} instead of @{.@} for input line without extension.

@item @strong{--use-cpus-instead-of-cores}
@anchor{@strong{--use-cpus-instead-of-cores}}

Count the number of physical CPUs instead of CPU cores. When computing
how many jobs to run simultaneously relative to the number of CPU cores
you can ask GNU @strong{parallel} to instead look at the number of physical
CPUs. This will make sense for computers that have hyperthreading as
two jobs running on one CPU with hyperthreading will run slower than
two jobs running on two physical CPUs. Some multi-core CPUs can run
faster if only one thread is running per physical CPU. Most users will
not need this option.

@item @strong{-v}
@anchor{@strong{-v}}

Verbose.  Print the job to be run on stdout (standard output). Can be reversed
with @strong{--silent}. See also @strong{-t}.

Use @strong{-v} @strong{-v} to print the wrapping ssh command when running remotely.

@item @strong{--version}
@anchor{@strong{--version}}

@item @strong{-V}
@anchor{@strong{-V}}

Print the version GNU @strong{parallel} and exit.

@item @strong{--workdir} @emph{mydir}
@anchor{@strong{--workdir} @emph{mydir}}

@item @strong{--wd} @emph{mydir}
@anchor{@strong{--wd} @emph{mydir}}

Files transferred using @strong{--transfer} and @strong{--return} will be relative
to @emph{mydir} on remote computers, and the command will be executed in
the dir @emph{mydir}.

The special @emph{mydir} value @strong{...} will create working dirs under
@strong{~/.parallel/tmp/} on the remote computers. If @strong{--cleanup} is given
these dirs will be removed.

The special @emph{mydir} value @strong{.} uses the current working dir.  If the
current working dir is beneath your home dir, the value @strong{.} is
treated as the relative path to your home dir. This means that if your
home dir is different on remote computers (e.g. if your login is
different) the relative path will still be relative to your home dir.

@item @strong{--wait}
@anchor{@strong{--wait}}

Wait for all commands to complete.

Implies @strong{--semaphore}.

See also: @strong{man sem}

@item @strong{-X}
@anchor{@strong{-X}}

Multiple arguments with context replace. Insert as many arguments as
the command line length permits. If multiple jobs are being run in
parallel: distribute the arguments evenly among the jobs. Use @strong{-j1}
to avoid this.

If @strong{@{@}} is not used the arguments will be appended to the line.  If
@strong{@{@}} is used as part of a word (like @emph{pic@{@}.jpg}) then the whole
word will be repeated. If @strong{@{@}} is used multiple times each @strong{@{@}} will
be replaced with the arguments.

Normally @strong{-X} will do the right thing, whereas @strong{-m} can give
unexpected results if @strong{@{@}} is used as part of a word.

Support for @strong{-X} with @strong{--sshlogin} is limited and may fail.

See also @strong{-m}.

@item @strong{--exit}
@anchor{@strong{--exit}}

@item @strong{-x}
@anchor{@strong{-x}}

Exit if the size (see the @strong{-s} option) is exceeded.

@item @strong{--xapply}
@anchor{@strong{--xapply}}

Read multiple input sources like @strong{xapply}. If multiple input sources
are given, one argument will be read from each of the input
sources. The arguments can be accessed in the command as @strong{@{1@}}
.. @strong{@{}@emph{n}@strong{@}}, so @strong{@{1@}} will be a line from the first input source, and
@strong{@{6@}} will refer to the line with the same line number from the 6th
input source.

Compare these two:

@verbatim
  parallel echo {1} {2} ::: 1 2 3 ::: a b c
  parallel --xapply echo {1} {2} ::: 1 2 3 ::: a b c
@end verbatim

See also @strong{--header}.

@item @strong{--shebang}
@anchor{@strong{--shebang}}

@item @strong{--hashbang}
@anchor{@strong{--hashbang}}

GNU @strong{Parallel} can be called as a shebang (#!) command as the first line of a script. Like this:

@verbatim
  #!/usr/bin/parallel --shebang -r traceroute

  foss.org.my
  debian.org
  freenetproject.org
@end verbatim

For this to work @strong{--shebang} must be set as the first option.

@end table

@chapter EXAMPLE: Working as xargs -n1. Argument appending
@anchor{EXAMPLE: Working as xargs -n1. Argument appending}

GNU @strong{parallel} can work similar to @strong{xargs -n1}.

To compress all html files using @strong{gzip} run:

@strong{find . -name '*.html' | parallel gzip}

If the file names may contain a newline use @strong{-0}. Substitute FOO BAR with
FUBAR in all files in this dir and subdirs:

@strong{find . -type f -print0 | parallel -q0 perl -i -pe 's/FOO BAR/FUBAR/g'}

Note @strong{-q} is needed because of the space in 'FOO BAR'.

@chapter EXAMPLE: Reading arguments from command line
@anchor{EXAMPLE: Reading arguments from command line}

GNU @strong{parallel} can take the arguments from command line instead of
stdin (standard input). To compress all html files in the current dir
using @strong{gzip} run:

@strong{parallel gzip ::: *.html}

To convert *.wav to *.mp3 using LAME running one process per CPU core
run:

@strong{parallel lame @{@} -o @{.@}.mp3 ::: *.wav}

@chapter EXAMPLE: Inserting multiple arguments
@anchor{EXAMPLE: Inserting multiple arguments}

When moving a lot of files like this: @strong{mv *.log destdir} you will
sometimes get the error:

@strong{bash: /bin/mv: Argument list too long}

because there are too many files. You can instead do:

@strong{ls | grep -E '\.log$' | parallel mv @{@} destdir}

This will run @strong{mv} for each file. It can be done faster if @strong{mv} gets
as many arguments that will fit on the line:

@strong{ls | grep -E '\.log$' | parallel -m mv @{@} destdir}

@chapter EXAMPLE: Context replace
@anchor{EXAMPLE: Context replace}

To remove the files @emph{pict0000.jpg} .. @emph{pict9999.jpg} you could do:

@strong{seq -w 0 9999 | parallel rm pict@{@}.jpg}

You could also do:

@strong{seq -w 0 9999 | perl -pe 's/(.*)/pict$1.jpg/' | parallel -m rm}

The first will run @strong{rm} 10000 times, while the last will only run
@strong{rm} as many times needed to keep the command line length short
enough to avoid @strong{Argument list too long} (it typically runs 1-2 times).

You could also run:

@strong{seq -w 0 9999 | parallel -X rm pict@{@}.jpg}

This will also only run @strong{rm} as many times needed to keep the command
line length short enough.

@chapter EXAMPLE: Compute intensive jobs and substitution
@anchor{EXAMPLE: Compute intensive jobs and substitution}

If ImageMagick is installed this will generate a thumbnail of a jpg
file:

@strong{convert -geometry 120 foo.jpg thumb_foo.jpg}

This will run with number-of-cpu-cores jobs in parallel for all jpg
files in a directory:

@strong{ls *.jpg | parallel convert -geometry 120 @{@} thumb_@{@}}

To do it recursively use @strong{find}:

@strong{find . -name '*.jpg' | parallel convert -geometry 120 @{@} @{@}_thumb.jpg}

Notice how the argument has to start with @strong{@{@}} as @strong{@{@}} will include path
(e.g. running @strong{convert -geometry 120 ./foo/bar.jpg
thumb_./foo/bar.jpg} would clearly be wrong). The command will
generate files like ./foo/bar.jpg_thumb.jpg.

Use @strong{@{.@}} to avoid the extra .jpg in the file name. This command will
make files like ./foo/bar_thumb.jpg:

@strong{find . -name '*.jpg' | parallel convert -geometry 120 @{@} @{.@}_thumb.jpg}

@chapter EXAMPLE: Substitution and redirection
@anchor{EXAMPLE: Substitution and redirection}

This will generate an uncompressed version of .gz-files next to the .gz-file:

@strong{parallel zcat @{@} "}>@strong{"@{.@} ::: *.gz}

Quoting of > is necessary to postpone the redirection. Another
solution is to quote the whole command:

@strong{parallel "zcat @{@} }>@strong{@{.@}" ::: *.gz}

Other special shell characters (such as * ; $ > < | >> <<) also need
to be put in quotes, as they may otherwise be interpreted by the shell
and not given to GNU @strong{parallel}.

@chapter EXAMPLE: Composed commands
@anchor{EXAMPLE: Composed commands}

A job can consist of several commands. This will print the number of
files in each directory:

@strong{ls | parallel 'echo -n @{@}" "; ls @{@}|wc -l'}

To put the output in a file called <name>.dir:

@strong{ls | parallel '(echo -n @{@}" "; ls @{@}|wc -l) }> @strong{@{@}.dir'}

Even small shell scripts can be run by GNU @strong{parallel}:

@strong{find . | parallel 'a=@{@}; name=$@{a##*/@}; upper=$(echo "$name" | tr "[:lower:]" "[:upper:]"); echo "$name - $upper"'}

@strong{ls | parallel 'mv @{@} "$(echo @{@} | tr "[:upper:]" "[:lower:]")"'}

Given a list of URLs, list all URLs that fail to download. Print the
line number and the URL.

@strong{cat urlfile | parallel "wget @{@} 2}>@strong{/dev/null || grep -n @{@} urlfile"}

Create a mirror directory with the same filenames except all files and
symlinks are empty files.

@strong{cp -rs /the/source/dir mirror_dir; find mirror_dir -type l | parallel -m rm @{@} '&&' touch @{@}}

Find the files in a list that do not exist

@strong{cat file_list | parallel 'if [ ! -e @{@} ] ; then echo @{@}; fi'}

@chapter EXAMPLE: Removing file extension when processing files
@anchor{EXAMPLE: Removing file extension when processing files}

When processing files removing the file extension using @strong{@{.@}} is
often useful.

Create a directory for each zip-file and unzip it in that dir:

@strong{parallel 'mkdir @{.@}; cd @{.@}; unzip ../@{@}' ::: *.zip}

Recompress all .gz files in current directory using @strong{bzip2} running 1
job per CPU core in parallel:

@strong{parallel "zcat @{@} | bzip2 }>@strong{@{.@}.bz2 && rm @{@}" ::: *.gz}

Convert all WAV files to MP3 using LAME:

@strong{find sounddir -type f -name '*.wav' | parallel lame @{@} -o @{.@}.mp3}

Put all converted in the same directory:

@strong{find sounddir -type f -name '*.wav' | parallel lame @{@} -o mydir/@{/.@}.mp3}

@chapter EXAMPLE: Removing two file extensions when processing files and calling GNU Parallel from itself
@anchor{EXAMPLE: Removing two file extensions when processing files and calling GNU Parallel from itself}

If you have directory with tar.gz files and want these extracted in
the corresponding dir (e.g foo.tar.gz will be extracted in the dir
foo) you can do:

@strong{ls *.tar.gz| parallel --er @{tar@} 'echo @{tar@}|parallel "mkdir -p @{.@} ; tar -C @{.@} -xf @{.@}.tar.gz"'}

@chapter EXAMPLE: Download 10 images for each of the past 30 days
@anchor{EXAMPLE: Download 10 images for each of the past 30 days}

Let us assume a website stores images like:

@verbatim
   http://www.example.com/path/to/YYYYMMDD_##.jpg
@end verbatim

where YYYYMMDD is the date and ## is the number 01-10. This will
download images for the past 30 days:

@strong{parallel wget http://www.example.com/path/to/'$(date -d "today -@{1@} days" +%Y%m%d)_@{2@}.jpg' ::: $(seq 30) ::: $(seq -w 10)}

@strong{$(date -d "today -@{1@} days" +%Y%m%d)} will give the dates in
YYYYMMDD with @{1@} days subtracted.

@chapter EXAMPLE: Breadth first parallel web crawler/mirrorer
@anchor{EXAMPLE: Breadth first parallel web crawler/mirrorer}

This script below will crawl and mirror a URL in parallel.  It
downloads first pages that are 1 click down, then 2 clicks down, then
3; instead of the normal depth first, where the first link link on
each page is fetched first.

Run like this:

@strong{PARALLEL=-j100 ./parallel-crawl http://gatt.org.yeslab.org/}

Remove the @strong{wget} part if you only want a web crawler.

It works by fetching a page from a list of URLs and looking for links
in that page that are within the same starting URL and that have not
already been seen. These links are added to a new queue. When all the
pages from the list is done, the new queue is moved to the list of
URLs and the process is started over until no unseen links are found.

@verbatim
  #!/bin/bash

  # E.g. http://gatt.org.yeslab.org/
  URL=$1
  # Stay inside the start dir
  BASEURL=$(echo $URL | perl -pe 's:#.*::; s:(//.*/)[^/]*:$1:')
  URLLIST=$(mktemp urllist.XXXX)
  URLLIST2=$(mktemp urllist.XXXX)
  SEEN=$(mktemp seen.XXXX)

  # Spider to get the URLs
  echo $URL >$URLLIST
  cp $URLLIST $SEEN

  while [ -s $URLLIST ] ; do
    cat $URLLIST |
      parallel lynx -listonly -image_links -dump {} \; wget -qm -l1 -Q1 {} \; echo Spidered: {} \>\&2 |
      perl -ne 's/#.*//; s/\s+\d+.\s(\S+)$/$1/ and do { $seen{$1}++ or print }' |
      grep -F $BASEURL |
      grep -v -x -F -f $SEEN | tee -a $SEEN > $URLLIST2
    mv $URLLIST2 $URLLIST
  done

  rm -f $URLLIST $URLLIST2 $SEEN
@end verbatim

@chapter EXAMPLE: Process files from a tar file while unpacking
@anchor{EXAMPLE: Process files from a tar file while unpacking}

If the files to be processed are in a tar file then unpacking one file
and processing it immediately may be faster than first unpacking all
files.

@strong{tar xvf foo.tgz | perl -ne 'print $l;$l=$_;END@{print $l@}' |
parallel echo}

The Perl one-liner is needed to avoid race condition.

@chapter EXAMPLE: Rewriting a for-loop and a while-read-loop
@anchor{EXAMPLE: Rewriting a for-loop and a while-read-loop}

for-loops like this:

@verbatim
  (for x in `cat list` ; do
    do_something $x
  done) | process_output
@end verbatim

and while-read-loops like this:

@verbatim
  cat list | (while read x ; do
    do_something $x
  done) | process_output
@end verbatim

can be written like this:

@strong{cat list | parallel do_something | process_output}

If the processing requires more steps the for-loop like this:

@verbatim
 (for x in `cat list` ; do
   no_extension=${x%.*};
   do_something $x scale $no_extension.jpg
   do_step2 <$x $no_extension
 done) | process_output
@end verbatim

and while-loops like this:

@verbatim
 cat list | (while read x ; do
   no_extension=${x%.*};
   do_something $x scale $no_extension.jpg
   do_step2 <$x $no_extension
 done) | process_output
@end verbatim

can be written like this:

@strong{cat list | parallel "do_something @{@} scale @{.@}.jpg ; do_step2 <@{@} @{.@}" | process_output}

@chapter EXAMPLE: Rewriting nested for-loops
@anchor{EXAMPLE: Rewriting nested for-loops}

Nested for-loops like this:

@verbatim
  (for x in `cat xlist` ; do
    for y in `cat ylist` ; do
      do_something $x $y
    done
  done) | process_output
@end verbatim

can be written like this:

@strong{parallel do_something @{1@} @{2@} :::: xlist ylist | process_output}

Nested for-loops like this:

@verbatim
  (for gender in M F ; do
    for size in S M L XL XXL ; do
      echo $gender $size
    done
  done) | sort
@end verbatim

can be written like this:

@strong{parallel echo @{1@} @{2@} ::: M F ::: S M L XL XXL | sort}

@chapter EXAMPLE: for-loops with column names
@anchor{EXAMPLE: for-loops with column names}

When doing multiple nested for-loops it can be easier to keep track of
the loop variable if is is named instead of just having a number. Use
@strong{--header :} to let the first argument be an named alias for the
positional replacement string:

@verbatim
  parallel --header : echo {gender} {size} ::: gender M F ::: size S M L XL XXL
@end verbatim

This also works if the input file is a file with columns:

@verbatim
  cat addressbook.tsv | parallel --colsep '\t' --header : echo {Name} {E-mail address}
@end verbatim

@chapter EXAMPLE: Count the differences between all files in a dir
@anchor{EXAMPLE: Count the differences between all files in a dir}

Using @strong{--results} the results are saved in /tmp/diffcount*.

@verbatim
  parallel --results /tmp/diffcount "diff -U 0 {1} {2} |tail -n +3 |grep -v '^@'|wc -l" ::: * ::: *
@end verbatim

To see the difference between file A and file B look at the file
'/tmp/diffcount 1 A 2 B' where spaces are TABs (\t).

@chapter EXAMPLE: Speeding up fast jobs
@anchor{EXAMPLE: Speeding up fast jobs}

Starting a job on the local machine takes around 3 ms. This can be a
big overhead if the job takes very few ms to run. Often you can group
small jobs together using @strong{-X} which will make the overhead less
significant. Compare the speed of these:

@verbatim
    seq -w 0 9999 | parallel touch pict{}.jpg

    seq -w 0 9999 | parallel -X touch pict{}.jpg
@end verbatim

If your program cannot take multiple arguments, then you can use GNU
@strong{parallel} to spawn multiple GNU @strong{parallel}s:

@verbatim
    seq -w 0 999999 | parallel -j10 --pipe parallel -j0 touch pict{}.jpg
@end verbatim

If @strong{-j0} normally spawns 506 jobs, then the above will try to spawn
5060 jobs. It is likely that you this way will hit the limit of number
of processes and/or filehandles. Look at 'ulimit -n' and 'ulimit -u'
to raise these limits.

@chapter EXAMPLE: Using shell variables
@anchor{EXAMPLE: Using shell variables}

When using shell variables you need to quote them correctly as they
may otherwise be split on spaces.

Notice the difference between:

@verbatim
 V=("My brother's 12\" records are worth <\$\$\$>"'!' Foo Bar)
 parallel echo ::: ${V[@]} # This is probably not what you want
@end verbatim

and:

@verbatim
 V=("My brother's 12\" records are worth <\$\$\$>"'!' Foo Bar)
 parallel echo ::: "${V[@]}"
@end verbatim

When using variables in the actual command that contains special
characters (e.g. space) you can quote them using @strong{'"$VAR"'} or using
"'s and @strong{-q}:

@verbatim
 V="Here  are  two "
 parallel echo "'$V'" ::: spaces
 parallel -q echo "$V" ::: spaces
@end verbatim

@chapter EXAMPLE: Group output lines
@anchor{EXAMPLE: Group output lines}

When running jobs that output data, you often do not want the output
of multiple jobs to run together. GNU @strong{parallel} defaults to grouping the
output of each job, so the output is printed when the job finishes. If
you want the output to be printed while the job is running you can use
@strong{-u}.

Compare the output of:

@strong{parallel traceroute ::: foss.org.my debian.org freenetproject.org}

to the output of:

@strong{parallel -u traceroute ::: foss.org.my debian.org freenetproject.org}

@chapter EXAMPLE: Tag output lines
@anchor{EXAMPLE: Tag output lines}

GNU @strong{parallel} groups the output lines, but it can be hard to see
where the different jobs begin. @strong{--tag} prepends the argument to make
that more visible:

@strong{parallel --tag traceroute ::: foss.org.my debian.org freenetproject.org}

Check the uptime of the servers in @emph{~/.parallel/sshloginfile}:

@strong{parallel --tag -S .. --nonall uptime}

@chapter EXAMPLE: Keep order of output same as order of input
@anchor{EXAMPLE: Keep order of output same as order of input}

Normally the output of a job will be printed as soon as it
completes. Sometimes you want the order of the output to remain the
same as the order of the input. This is often important, if the output
is used as input for another system. @strong{-k} will make sure the order of
output will be in the same order as input even if later jobs end
before earlier jobs.

Append a string to every line in a text file:

@strong{cat textfile | parallel -k echo @{@} append_string}

If you remove @strong{-k} some of the lines may come out in the wrong order.

Another example is @strong{traceroute}:

@strong{parallel traceroute ::: foss.org.my debian.org freenetproject.org}

will give traceroute of foss.org.my, debian.org and
freenetproject.org, but it will be sorted according to which job
completed first.

To keep the order the same as input run:

@strong{parallel -k traceroute ::: foss.org.my debian.org freenetproject.org}

This will make sure the traceroute to foss.org.my will be printed
first.

A bit more complex example is downloading a huge file in chunks in
parallel: Some internet connections will deliver more data if you
download files in parallel. For downloading files in parallel see:
"EXAMPLE: Download 10 images for each of the past 30 days". But if you
are downloading a big file you can download the file in chunks in
parallel.

To download byte 10000000-19999999 you can use @strong{curl}:

@strong{curl -r 10000000-19999999 http://example.com/the/big/file} > @strong{file.part}

To download a 1 GB file we need 100 10MB chunks downloaded and
combined in the correct order.

@strong{seq 0 99 | parallel -k curl -r \
    @{@}0000000-@{@}9999999 http://example.com/the/big/file} > @strong{file}

@chapter EXAMPLE: Parallel grep
@anchor{EXAMPLE: Parallel grep}

@strong{grep -r} greps recursively through directories. On multicore CPUs
GNU @strong{parallel} can often speed this up.

@strong{find . -type f | parallel -k -j150% -n 1000 -m grep -H -n STRING @{@}}

This will run 1.5 job per core, and give 1000 arguments to @strong{grep}.

To grep a big file in parallel use @strong{--pipe}:

@strong{cat bigfile | parallel --pipe grep foo}

Depending on your disks and CPUs it may be faster to read larger blocks:

@strong{cat bigfile | parallel --pipe --block 10M grep foo}

@chapter EXAMPLE: Using remote computers
@anchor{EXAMPLE: Using remote computers}

To run commands on a remote computer SSH needs to be set up and you
must be able to login without entering a password (The commands
@strong{ssh-copy-id} and @strong{ssh-agent} may help you do that).

To run @strong{echo} on @strong{server.example.com}:

@verbatim
  seq 10 | parallel --sshlogin server.example.com echo
@end verbatim

To run commands on more than one remote computer run:

@verbatim
  seq 10 | parallel --sshlogin server.example.com,server2.example.net echo
@end verbatim

Or:

@verbatim
  seq 10 | parallel --sshlogin server.example.com \
    --sshlogin server2.example.net echo
@end verbatim

If the login username is @emph{foo} on @emph{server2.example.net} use:

@verbatim
  seq 10 | parallel --sshlogin server.example.com \
    --sshlogin foo@server2.example.net echo
@end verbatim

To distribute the commands to a list of computers, make a file
@emph{mycomputers} with all the computers:

@verbatim
  server.example.com
  foo@server2.example.com
  server3.example.com
@end verbatim

Then run:

@verbatim
  seq 10 | parallel --sshloginfile mycomputers echo
@end verbatim

To include the local computer add the special sshlogin ':' to the list:

@verbatim
  server.example.com
  foo@server2.example.com
  server3.example.com
  :
@end verbatim

GNU @strong{parallel} will try to determine the number of CPU cores on each
of the remote computers, and run one job per CPU core - even if the
remote computers do not have the same number of CPU cores.

If the number of CPU cores on the remote computers is not identified
correctly the number of CPU cores can be added in front. Here the
computer has 8 CPU cores.

@verbatim
  seq 10 | parallel --sshlogin 8/server.example.com echo
@end verbatim

@chapter EXAMPLE: Transferring of files
@anchor{EXAMPLE: Transferring of files}

To recompress gzipped files with @strong{bzip2} using a remote computer run:

@verbatim
  find logs/ -name '*.gz' | \
    parallel --sshlogin server.example.com \
    --transfer "zcat {} | bzip2 -9 >{.}.bz2"
@end verbatim

This will list the .gz-files in the @emph{logs} directory and all
directories below. Then it will transfer the files to
@emph{server.example.com} to the corresponding directory in
@emph{$HOME/logs}. On @emph{server.example.com} the file will be recompressed
using @strong{zcat} and @strong{bzip2} resulting in the corresponding file with
@emph{.gz} replaced with @emph{.bz2}.

If you want the resulting bz2-file to be transferred back to the local
computer add @emph{--return @{.@}.bz2}:

@verbatim
  find logs/ -name '*.gz' | \
    parallel --sshlogin server.example.com \
    --transfer --return {.}.bz2 "zcat {} | bzip2 -9 >{.}.bz2"
@end verbatim

After the recompressing is done the @emph{.bz2}-file is transferred back to
the local computer and put next to the original @emph{.gz}-file.

If you want to delete the transferred files on the remote computer add
@emph{--cleanup}. This will remove both the file transferred to the remote
computer and the files transferred from the remote computer:

@verbatim
  find logs/ -name '*.gz' | \
    parallel --sshlogin server.example.com \
    --transfer --return {.}.bz2 --cleanup "zcat {} | bzip2 -9 >{.}.bz2"
@end verbatim

If you want run on several computers add the computers to @emph{--sshlogin}
either using ',' or multiple @emph{--sshlogin}:

@verbatim
  find logs/ -name '*.gz' | \
    parallel --sshlogin server.example.com,server2.example.com \
    --sshlogin server3.example.com \
    --transfer --return {.}.bz2 --cleanup "zcat {} | bzip2 -9 >{.}.bz2"
@end verbatim

You can add the local computer using @emph{--sshlogin :}. This will disable the
removing and transferring for the local computer only:

@verbatim
  find logs/ -name '*.gz' | \
    parallel --sshlogin server.example.com,server2.example.com \
    --sshlogin server3.example.com \
    --sshlogin : \
    --transfer --return {.}.bz2 --cleanup "zcat {} | bzip2 -9 >{.}.bz2"
@end verbatim

Often @emph{--transfer}, @emph{--return} and @emph{--cleanup} are used together. They can be
shortened to @emph{--trc}:

@verbatim
  find logs/ -name '*.gz' | \
    parallel --sshlogin server.example.com,server2.example.com \
    --sshlogin server3.example.com \
    --sshlogin : \
    --trc {.}.bz2 "zcat {} | bzip2 -9 >{.}.bz2"
@end verbatim

With the file @emph{mycomputers} containing the list of computers it becomes:

@verbatim
  find logs/ -name '*.gz' | parallel --sshloginfile mycomputers \
    --trc {.}.bz2 "zcat {} | bzip2 -9 >{.}.bz2"
@end verbatim

If the file @emph{~/.parallel/sshloginfile} contains the list of computers
the special short hand @emph{-S ..} can be used:

@verbatim
  find logs/ -name '*.gz' | parallel -S .. \
    --trc {.}.bz2 "zcat {} | bzip2 -9 >{.}.bz2"
@end verbatim

@chapter EXAMPLE: Distributing work to local and remote computers
@anchor{EXAMPLE: Distributing work to local and remote computers}

Convert *.mp3 to *.ogg running one process per CPU core on local computer and server2:

@verbatim
  parallel --trc {.}.ogg -S server2,: \
  'mpg321 -w - {} | oggenc -q0 - -o {.}.ogg' ::: *.mp3
@end verbatim

@chapter EXAMPLE: Running the same command on remote computers
@anchor{EXAMPLE: Running the same command on remote computers}

To run the command @strong{uptime} on remote computers you can do:

@strong{parallel --tag --nonall -S server1,server2 uptime}

@strong{--nonall} reads no arguments. If you have a list of jobs you want
run on each computer you can do:

@strong{parallel --tag --onall -S server1,server2 echo ::: 1 2 3}

Remove @strong{--tag} if you do not want the sshlogin added before the
output.

If you have a lot of hosts use '-j0' to access more hosts in parallel.

@chapter EXAMPLE: Parallelizing rsync
@anchor{EXAMPLE: Parallelizing rsync}

@strong{rsync} is a great tool, but sometimes it will not fill up the
available bandwidth. This is often a problem when copying several big
files over high speed connections.

The following will start one @strong{rsync} per big file in @emph{src-dir} to
@emph{dest-dir} on the server @emph{fooserver}:

@strong{find src-dir -type f -size +100000 | parallel -v ssh fooserver
mkdir -p /dest-dir/@{//@}\;rsync -Havessh @{@} fooserver:/dest-dir/@{@}}

The dirs created may end up with wrong permissions and smaller files
are not being transferred. To fix those run @strong{rsync} a final time:

@strong{rsync -Havessh src-dir/ fooserver:/dest-dir/}

@chapter EXAMPLE: Use multiple inputs in one command
@anchor{EXAMPLE: Use multiple inputs in one command}

Copy files like foo.es.ext to foo.ext:

@strong{ls *.es.* | perl -pe 'print; s/\.es//' | parallel -N2 cp @{1@} @{2@}}

The perl command spits out 2 lines for each input. GNU @strong{parallel}
takes 2 inputs (using @strong{-N2}) and replaces @{1@} and @{2@} with the inputs.

Count in binary:

@strong{parallel -k echo ::: 0 1 ::: 0 1 ::: 0 1 ::: 0 1 ::: 0 1 ::: 0 1}

Print the number on the opposing sides of a six sided die:

@strong{parallel --xapply -a <(seq 6) -a <(seq 6 -1 1) echo}

@strong{parallel --xapply echo :::: <(seq 6) <(seq 6 -1 1)}

Convert files from all subdirs to PNG-files with consecutive numbers
(useful for making input PNG's for @strong{ffmpeg}):

@strong{parallel --xapply -a <(find . -type f | sort) -a <(seq $(find . -type f|wc -l)) convert @{1@} @{2@}.png}

Alternative version:

@strong{find . -type f | sort | parallel convert @{@} @{#@}.png}

@chapter EXAMPLE: Use a table as input
@anchor{EXAMPLE: Use a table as input}

Content of table_file.tsv:

@verbatim
  foo<TAB>bar
  baz <TAB> quux
@end verbatim

To run:

@verbatim
  cmd -o bar -i foo
  cmd -o quux -i baz
@end verbatim

you can run:

@strong{parallel -a table_file.tsv --colsep '\t' cmd -o @{2@} -i @{1@}}

Note: The default for GNU @strong{parallel} is to remove the spaces around the columns. To keep the spaces:

@strong{parallel -a table_file.tsv --trim n --colsep '\t' cmd -o @{2@} -i @{1@}}

@chapter EXAMPLE: Run the same command 10 times
@anchor{EXAMPLE: Run the same command 10 times}

If you want to run the same command with the same arguments 10 times
in parallel you can do:

@strong{seq 10 | parallel -n0 my_command my_args}

@chapter EXAMPLE: Working as cat | sh. Resource inexpensive jobs and evaluation
@anchor{EXAMPLE: Working as cat | sh. Resource inexpensive jobs and evaluation}

GNU @strong{parallel} can work similar to @strong{cat | sh}.

A resource inexpensive job is a job that takes very little CPU, disk
I/O and network I/O. Ping is an example of a resource inexpensive
job. wget is too - if the webpages are small.

The content of the file jobs_to_run:

@verbatim
  ping -c 1 10.0.0.1
  wget http://example.com/status.cgi?ip=10.0.0.1
  ping -c 1 10.0.0.2
  wget http://example.com/status.cgi?ip=10.0.0.2
  ...
  ping -c 1 10.0.0.255
  wget http://example.com/status.cgi?ip=10.0.0.255
@end verbatim

To run 100 processes simultaneously do:

@strong{parallel -j 100 < jobs_to_run}

As there is not a @emph{command} the jobs will be evaluated by the shell.

@chapter EXAMPLE: Processing a big file using more cores
@anchor{EXAMPLE: Processing a big file using more cores}

To process a big file or some output you can use @strong{--pipe} to split up
the data into blocks and pipe the blocks into the processing program.

If the program is @strong{gzip -9} you can do:

@strong{cat bigfile | parallel --pipe --recend '' -k gzip -9 }>@strong{bigfile.gz}

This will split @strong{bigfile} into blocks of 1 MB and pass that to @strong{gzip
-9} in parallel. One @strong{gzip} will be run per CPU core. The output of
@strong{gzip -9} will be kept in order and saved to @strong{bigfile.gz}

@strong{gzip} works fine if the output is appended, but some processing does
not work like that - for example sorting. For this GNU @strong{parallel} can
put the output of each command into a file. This will sort a big file
in parallel:

@strong{cat bigfile | parallel --pipe --files sort | parallel -Xj1 sort -m @{@} ';' rm @{@} }>@strong{bigfile.sort}

Here @strong{bigfile} is split into blocks of around 1MB, each block ending
in '\n' (which is the default for @strong{--recend}). Each block is passed
to @strong{sort} and the output from @strong{sort} is saved into files. These
files are passed to the second @strong{parallel} that runs @strong{sort -m} on the
files before it removes the files. The output is saved to
@strong{bigfile.sort}.

@chapter EXAMPLE: Working as mutex and counting semaphore
@anchor{EXAMPLE: Working as mutex and counting semaphore}

The command @strong{sem} is an alias for @strong{parallel --semaphore}.

A counting semaphore will allow a given number of jobs to be started
in the background.  When the number of jobs are running in the
background, GNU @strong{sem} will wait for one of these to complete before
starting another command. @strong{sem --wait} will wait for all jobs to
complete.

Run 10 jobs concurrently in the background:

@verbatim
  for i in *.log ; do
    echo $i
    sem -j10 gzip $i ";" echo done
  done
  sem --wait
@end verbatim

A mutex is a counting semaphore allowing only one job to run. This
will edit the file @emph{myfile} and prepends the file with lines with the
numbers 1 to 3.

@verbatim
  seq 3 | parallel sem sed -i -e 'i{}' myfile
@end verbatim

As @emph{myfile} can be very big it is important only one process edits
the file at the same time.

Name the semaphore to have multiple different semaphores active at the
same time:

@verbatim
  seq 3 | parallel sem --id mymutex sed -i -e 'i{}' myfile
@end verbatim

@chapter EXAMPLE: Start editor with filenames from stdin (standard input)
@anchor{EXAMPLE: Start editor with filenames from stdin (standard input)}

You can use GNU @strong{parallel} to start interactive programs like emacs or vi:

@strong{cat filelist | parallel --tty -X emacs}

@strong{cat filelist | parallel --tty -X vi}

If there are more files than will fit on a single command line, the
editor will be started again with the remaining files.

@chapter EXAMPLE: Running sudo
@anchor{EXAMPLE: Running sudo}

@strong{sudo} requires a password to run a command as root. It caches the
access, so you only need to enter the password again if you have not
used @strong{sudo} for a while.

The command:

@verbatim
  parallel sudo echo ::: This is a bad idea
@end verbatim

is no good, as you would be prompted for the sudo password for each of
the jobs. You can either do:

@verbatim
  sudo echo This
  parallel sudo echo ::: is a good idea
@end verbatim

or:

@verbatim
  sudo parallel echo ::: This is a good idea
@end verbatim

This way you only have to enter the sudo password once.

@chapter EXAMPLE: GNU Parallel as queue system/batch manager
@anchor{EXAMPLE: GNU Parallel as queue system/batch manager}

GNU @strong{parallel} can work as a simple job queue system or batch manager.
The idea is to put the jobs into a file and have GNU @strong{parallel} read
from that continuously. As GNU @strong{parallel} will stop at end of file we
use @strong{tail} to continue reading:

@strong{true }>@strong{jobqueue}; @strong{tail -f jobqueue | parallel}

To submit your jobs to the queue:

@strong{echo my_command my_arg }>>@strong{ jobqueue}

You can of course use @strong{-S} to distribute the jobs to remote
computers:

@strong{echo }>@strong{jobqueue}; @strong{tail -f jobqueue | parallel -S ..}

There are a two small issues when using GNU @strong{parallel} as queue
system/batch manager:

@itemize
@item You will get a warning if you do not submit JobSlots jobs within the
first second. E.g. if you have 8 cores and use @strong{-j+2} you have to submit
10 jobs. These can be dummy jobs (e.g. @strong{echo foo}). You can also simply
ignore the warning.

@item Jobs will be run immediately, but output from jobs will only be
printed when JobSlots more jobs has been started. E.g. if you have 10
jobslots then the output from the first completed job will only be
printed when job 11 is started.

@end itemize

@chapter EXAMPLE: GNU Parallel as dir processor
@anchor{EXAMPLE: GNU Parallel as dir processor}

If you have a dir in which users drop files that needs to be processed
you can do this on GNU/Linux (If you know what @strong{inotifywait} is
called on other platforms file a bug report):

@strong{inotifywait -q -m -r -e MOVED_TO -e CLOSE_WRITE --format %w%f my_dir | parallel
-u echo}

This will run the command @strong{echo} on each file put into @strong{my_dir} or
subdirs of @strong{my_dir}.

The @strong{-u} is needed because of a small bug in GNU @strong{parallel}. If that
proves to be a problem, file a bug report.

You can of course use @strong{-S} to distribute the jobs to remote
computers:

@strong{inotifywait -q -m -r -e MOVED_TO -e CLOSE_WRITE --format %w%f my_dir
| parallel -S ..  -u echo}

If the files to be processed are in a tar file then unpacking one file
and processing it immediately may be faster than first unpacking all
files. Set up the dir processor as above and unpack into the dir.

@chapter QUOTING
@anchor{QUOTING}

GNU @strong{parallel} is very liberal in quoting. You only need to quote
characters that have special meaning in shell:

( ) $ ` ' " < > ; | \

and depending on context these needs to be quoted, too:

~ & # ! ? space * @{

Therefore most people will never need more quoting than putting '\'
in front of the special characters.

Often you can simply put \' around every ':

@verbatim
  perl -ne '/^\S+\s+\S+$/ and print $ARGV,"\n"' file
@end verbatim

can be quoted:

@verbatim
  parallel perl -ne \''/^\S+\s+\S+$/ and print $ARGV,"\n"'\' ::: file
@end verbatim

However, when you want to use a shell variable you need to quote the
$-sign. Here is an example using $PARALLEL_SEQ. This variable is set
by GNU @strong{parallel} itself, so the evaluation of the $ must be done by
the sub shell started by GNU @strong{parallel}:

@strong{seq 10 | parallel -N2 echo seq:\$PARALLEL_SEQ arg1:@{1@} arg2:@{2@}}

If the variable is set before GNU @strong{parallel} starts you can do this:

@strong{VAR=this_is_set_before_starting}

@strong{echo test | parallel echo @{@} $VAR}

Prints: @strong{test this_is_set_before_starting}

It is a little more tricky if the variable contains more than one space in a row:

@strong{VAR="two  spaces  between  each  word"}

@strong{echo test | parallel echo @{@} \'"$VAR"\'}

Prints: @strong{test two  spaces  between  each  word}

If the variable should not be evaluated by the shell starting GNU
@strong{parallel} but be evaluated by the sub shell started by GNU
@strong{parallel}, then you need to quote it:

@strong{echo test | parallel VAR=this_is_set_after_starting \; echo @{@} \$VAR}

Prints: @strong{test this_is_set_after_starting}

It is a little more tricky if the variable contains space:

@strong{echo test | parallel VAR='"two  spaces  between  each  word"' echo @{@} \'"$VAR"\'}

Prints: @strong{test two  spaces  between  each  word}

$$ is the shell variable containing the process id of the shell. This
will print the process id of the shell running GNU @strong{parallel}:

@strong{seq 10 | parallel echo $$}

And this will print the process ids of the sub shells started by GNU
@strong{parallel}.

@strong{seq 10 | parallel echo \$\$}

If the special characters should not be evaluated by the sub shell
then you need to protect it against evaluation from both the shell
starting GNU @strong{parallel} and the sub shell:

@strong{echo test | parallel echo @{@} \\\$VAR}

Prints: @strong{test $VAR}

GNU @strong{parallel} can protect against evaluation by the sub shell by
using -q:

@strong{echo test | parallel -q echo @{@} \$VAR}

Prints: @strong{test $VAR}

This is particularly useful if you have lots of quoting. If you want to run a perl script like this:

@strong{perl -ne '/^\S+\s+\S+$/ and print $ARGV,"\n"' file}

It needs to be quoted like this:

@strong{ls | parallel  perl -ne '/^\\S+\\s+\\S+\$/\ and\ print\ \$ARGV,\"\\n\"'}

Notice how spaces, \'s, "'s, and $'s need to be quoted. GNU @strong{parallel}
can do the quoting by using option -q:

@strong{ls | parallel -q  perl -ne '/^\S+\s+\S+$/ and print $ARGV,"\n"'}

However, this means you cannot make the sub shell interpret special
characters. For example because of @strong{-q} this WILL NOT WORK:

@strong{ls *.gz | parallel -q "zcat @{@} }>@strong{@{.@}"}

@strong{ls *.gz | parallel -q "zcat @{@} | bzip2 }>@strong{@{.@}.bz2"}

because > and | need to be interpreted by the sub shell.

If you get errors like:

@verbatim
  sh: -c: line 0: syntax error near unexpected token
  sh: Syntax error: Unterminated quoted string
  sh: -c: line 0: unexpected EOF while looking for matching `''
  sh: -c: line 1: syntax error: unexpected end of file
@end verbatim

then you might try using @strong{-q}.

If you are using @strong{bash} process substitution like @strong{<(cat foo)} then
you may try @strong{-q} and prepending @emph{command} with @strong{bash -c}:

@strong{ls | parallel -q bash -c 'wc -c <(echo @{@})'}

Or for substituting output:

@strong{ls | parallel -q bash -c 'tar c @{@} | tee }>@strong{(gzip }>@strong{@{@}.tar.gz) | bzip2 }>@strong{@{@}.tar.bz2'}

@strong{Conclusion}: To avoid dealing with the quoting problems it may be
easier just to write a small script and have GNU @strong{parallel} call that
script.

@chapter LIST RUNNING JOBS
@anchor{LIST RUNNING JOBS}

If you want a list of the jobs currently running you can run:

@strong{killall -USR1 parallel}

GNU @strong{parallel} will then print the currently running jobs on stderr
(standard error).

@chapter COMPLETE RUNNING JOBS BUT DO NOT START NEW JOBS
@anchor{COMPLETE RUNNING JOBS BUT DO NOT START NEW JOBS}

If you regret starting a lot of jobs you can simply break GNU @strong{parallel},
but if you want to make sure you do not have half-completed jobs you
should send the signal @strong{SIGTERM} to GNU @strong{parallel}:

@strong{killall -TERM parallel}

This will tell GNU @strong{parallel} to not start any new jobs, but wait until
the currently running jobs are finished before exiting.

@chapter ENVIRONMENT VARIABLES
@anchor{ENVIRONMENT VARIABLES}

@table @asis
@item $PARALLEL_PID
@anchor{$PARALLEL_PID}

The environment variable $PARALLEL_PID is set by GNU @strong{parallel} and
is visible to the jobs started from GNU @strong{parallel}. This makes it
possible for the jobs to communicate directly to GNU @strong{parallel}.
Remember to quote the $, so it gets evaluated by the correct
shell.

@strong{Example:} If each of the jobs tests a solution and one of jobs finds
the solution the job can tell GNU @strong{parallel} not to start more jobs
by: @strong{kill -TERM $PARALLEL_PID}. This only works on the local
computer.

@item $PARALLEL_SEQ
@anchor{$PARALLEL_SEQ}

$PARALLEL_SEQ will be set to the sequence number of the job
running. Remember to quote the $, so it gets evaluated by the correct
shell.

@strong{Example:}

@strong{seq 10 | parallel -N2 echo seq:'$'PARALLEL_SEQ arg1:@{1@} arg2:@{2@}}

@item $TMPDIR
@anchor{$TMPDIR}

Directory for temporary files. See: @strong{--tmpdir}.

@item $PARALLEL
@anchor{$PARALLEL}

The environment variable $PARALLEL will be used as default options for
GNU @strong{parallel}. If the variable contains special shell characters
(e.g. $, *, or space) then these need to be to be escaped with \.

@strong{Example:}

@strong{cat list | parallel -j1 -k -v ls}

can be written as:

@strong{cat list | PARALLEL="-kvj1" parallel ls}

@strong{cat list | parallel -j1 -k -v -S"myssh user@@server" ls}

can be written as:

@strong{cat list | PARALLEL='-kvj1 -S myssh\ user@@server' parallel echo}

Notice the \ in the middle is needed because 'myssh' and 'user@@server'
must be one argument.

@end table

@chapter DEFAULT PROFILE (CONFIG FILE)
@anchor{DEFAULT PROFILE (CONFIG FILE)}

The file ~/.parallel/config (formerly known as .parallelrc) will be
read if it exists.  Lines starting with '#' will be ignored. It can be
formatted like the environment variable $PARALLEL, but it is often
easier to simply put each option on its own line.

Options on the command line takes precedence over the environment
variable $PARALLEL which takes precedence over the file
~/.parallel/config.

@chapter PROFILE FILES
@anchor{PROFILE FILES}

If @strong{--profile} set, GNU @strong{parallel} will read the profile from that file instead of
~/.parallel/config. You can have multiple @strong{--profiles}.

Example: Profile for running a command on every sshlogin in
~/.ssh/sshlogins and prepend the output with the sshlogin:

@verbatim
  echo --tag -S .. --nonall > ~/.parallel/n
  parallel -Jn uptime
@end verbatim

Example: Profile for running every command with @strong{-j-1} and @strong{nice}

@verbatim
  echo -j-1 nice > ~/.parallel/nice_profile
  parallel -J nice_profile bzip2 -9 ::: *
@end verbatim

Example: Profile for running a perl script before every command:

@verbatim
  echo "perl -e '\$a=\$\$; print \$a,\" \",'\$PARALLEL_SEQ',\" \";';" > ~/.parallel/pre_perl
  parallel -J pre_perl echo ::: *
@end verbatim

Note how the $ and " need to be quoted using \.

Example: Profile for running distributed jobs with @strong{nice} on the
remote computers:

@verbatim
  echo -S .. nice > ~/.parallel/dist
  parallel -J dist --trc {.}.bz2 bzip2 -9 ::: *
@end verbatim

@chapter EXIT STATUS
@anchor{EXIT STATUS}

If @strong{--halt-on-error} 0 or not specified:

@table @asis
@item 0
@anchor{0 1}

All jobs ran without error.

@item 1-253
@anchor{1-253}

Some of the jobs failed. The exit status gives the number of failed jobs

@item 254
@anchor{254}

More than 253 jobs failed.

@item 255
@anchor{255}

Other error.

@end table

If @strong{--halt-on-error} 1 or 2: Exit status of the failing job.

@chapter DIFFERENCES BETWEEN GNU Parallel AND ALTERNATIVES
@anchor{DIFFERENCES BETWEEN GNU Parallel AND ALTERNATIVES}

There are a lot programs with some of the functionality of GNU
@strong{parallel}. GNU @strong{parallel} strives to include the best of the
functionality without sacrificing ease of use.

@section SUMMARY TABLE
@anchor{SUMMARY TABLE}

The following features are in some of the comparable tools:

Inputs
 I1. Arguments can be read from stdin
 I2. Arguments can be read from a file
 I3. Arguments can be read from multiple files
 I4. Arguments can be read from command line
 I5. Arguments can be read from a table
 I6. Arguments can be read from the same file using #! (shebang)
 I7. Line oriented input as default (Quoting of special chars not needed)

Manipulation of input
 M1. Composed command
 M2. Multiple arguments can fill up an execution line
 M3. Arguments can be put anywhere in the execution line
 M4. Multiple arguments can be put anywhere in the execution line
 M5. Arguments can be replaced with context
 M6. Input can be treated as complete execution line

Outputs
 O1. Grouping output so output from different jobs do not mix
 O2. Send stderr (standard error) to stderr (standard error)
 O3. Send stdout (standard output) to stdout (standard output)
 O4. Order of output can be same as order of input
 O5. Stdout only contains stdout (standard output) from the command
 O6. Stderr only contains stderr (standard error) from the command

Execution
 E1. Running jobs in parallel
 E2. List running jobs
 E3. Finish running jobs, but do not start new jobs
 E4. Number of running jobs can depend on number of cpus
 E5. Finish running jobs, but do not start new jobs after first failure
 E6. Number of running jobs can be adjusted while running

Remote execution
 R1. Jobs can be run on remote computers
 R2. Basefiles can be transferred
 R3. Argument files can be transferred
 R4. Result files can be transferred
 R5. Cleanup of transferred files
 R6. No config files needed
 R7. Do not run more than SSHD's MaxStartup can handle
 R8. Configurable SSH command
 R9. Retry if connection breaks occasionally

Semaphore
 S1. Possibility to work as a mutex
 S2. Possibility to work as a counting semaphore

Legend
 - = no
 x = not applicable
 ID = yes

As every new version of the programs are not tested the table may be
outdated. Please file a bug-report if you find errors (See REPORTING
BUGS).

parallel:
I1 I2 I3 I4 I5 I6 I7
M1 M2 M3 M4 M5 M6
O1 O2 O3 O4 O5 O6
E1 E2 E3 E4 E5 E6
R1 R2 R3 R4 R5 R6 R7 R8 R9
S1 S2

xargs:
I1 I2 -  -  -  -  -
-  M2 M3 -  -  -
-  O2 O3 -  O5 O6
E1 -  -  -  -  -
-  -  -  -  -  x  -  -  -
-  -

find -exec:
-  -  -  x  -  x  -
-  M2 M3 -  -  -  -
-  O2 O3 O4 O5 O6
-  -  -  -  -  -  -
-  -  -  -  -  -  -  -  -
x  x

make -j:
-  -  -  -  -  -  -
-  -  -  -  -  -
O1 O2 O3 -  x  O6
E1 -  -  -  E5 -
-  -  -  -  -  -  -  -  -
-  -

ppss:
I1 I2 -  -  -  -  I7
M1 -  M3 -  -  M6
O1 -  -  x  -  -
E1 E2 ?E3 E4 - -
R1 R2 R3 R4 -  -  ?R7 ? ?
-  -

pexec:
I1 I2 -  I4 I5 -  -
M1 -  M3 -  -  M6
O1 O2 O3 -  O5 O6
E1 -  -  E4 -  E6
R1 -  -  -  -  R6 -  -  -
S1 -

xjobs: TODO - Please file a bug-report if you know what features xjobs
supports (See REPORTING BUGS).

prll: TODO - Please file a bug-report if you know what features prll
supports (See REPORTING BUGS).

dxargs: TODO - Please file a bug-report if you know what features dxargs
supports (See REPORTING BUGS).

mdm/middelman: TODO - Please file a bug-report if you know what
features mdm/middelman supports (See REPORTING BUGS).

xapply: TODO - Please file a bug-report if you know what features xapply
supports (See REPORTING BUGS).

paexec: TODO - Please file a bug-report if you know what features paexec
supports (See REPORTING BUGS).

ClusterSSH: TODO - Please file a bug-report if you know what features ClusterSSH
supports (See REPORTING BUGS).

@section DIFFERENCES BETWEEN xargs AND GNU Parallel
@anchor{DIFFERENCES BETWEEN xargs AND GNU Parallel}

@strong{xargs} offer some of the same possibilities as GNU @strong{parallel}.

@strong{xargs} deals badly with special characters (such as space, ' and
"). To see the problem try this:

@verbatim
  touch important_file
  touch 'not important_file'
  ls not* | xargs rm
  mkdir -p "My brother's 12\" records"
  ls | xargs rmdir
@end verbatim

You can specify @strong{-0} or @strong{-d "\n"}, but many input generators are not
optimized for using @strong{NUL} as separator but are optimized for
@strong{newline} as separator. E.g @strong{head}, @strong{tail}, @strong{awk}, @strong{ls}, @strong{echo},
@strong{sed}, @strong{tar -v}, @strong{perl} (@strong{-0} and \0 instead of \n), @strong{locate}
(requires using @strong{-0}), @strong{find} (requires using @strong{-print0}), @strong{grep}
(requires user to use @strong{-z} or @strong{-Z}), @strong{sort} (requires using @strong{-z}).

So GNU @strong{parallel}'s newline separation can be emulated with:

@strong{cat | xargs -d "\n" -n1 @emph{command}}

@strong{xargs} can run a given number of jobs in parallel, but has no
support for running number-of-cpu-cores jobs in parallel.

@strong{xargs} has no support for grouping the output, therefore output may
run together, e.g. the first half of a line is from one process and
the last half of the line is from another process. The example
@strong{Parallel grep} cannot be done reliably with @strong{xargs} because of
this. To see this in action try:

@verbatim
  parallel perl -e '\$a=\"1{}\"x10000000\;print\ \$a,\"\\n\"' '>' {} ::: a b c d e f
  ls -l a b c d e f
  parallel -kP4 -n1 grep 1 > out.par ::: a b c d e f
  echo a b c d e f | xargs -P4 -n1 grep 1 > out.xargs-unbuf
  echo a b c d e f | xargs -P4 -n1 grep --line-buffered 1 > out.xargs-linebuf
  echo a b c d e f | xargs -n1 grep --line-buffered 1 > out.xargs-serial
  ls -l out*
  md5sum out*
@end verbatim

@strong{xargs} has no support for keeping the order of the output, therefore
if running jobs in parallel using @strong{xargs} the output of the second
job cannot be postponed till the first job is done.

@strong{xargs} has no support for running jobs on remote computers.

@strong{xargs} has no support for context replace, so you will have to create the
arguments.

If you use a replace string in @strong{xargs} (@strong{-I}) you can not force
@strong{xargs} to use more than one argument.

Quoting in @strong{xargs} works like @strong{-q} in GNU @strong{parallel}. This means
composed commands and redirection require using @strong{bash -c}.

@strong{ls | parallel "wc @{@} }> @strong{@{@}.wc"}

becomes (assuming you have 8 cores)

@strong{ls | xargs -d "\n" -P8 -I @{@} bash -c "wc @{@} }>@strong{ @{@}.wc"}

and

@strong{ls | parallel "echo @{@}; ls @{@}|wc"}

becomes (assuming you have 8 cores)

@strong{ls | xargs -d "\n" -P8 -I @{@} bash -c "echo @{@}; ls @{@}|wc"}

@section DIFFERENCES BETWEEN find -exec AND GNU Parallel
@anchor{DIFFERENCES BETWEEN find -exec AND GNU Parallel}

@strong{find -exec} offer some of the same possibilities as GNU @strong{parallel}.

@strong{find -exec} only works on files. So processing other input (such as
hosts or URLs) will require creating these inputs as files. @strong{find
-exec} has no support for running commands in parallel.

@section DIFFERENCES BETWEEN make -j AND GNU Parallel
@anchor{DIFFERENCES BETWEEN make -j AND GNU Parallel}

@strong{make -j} can run jobs in parallel, but requires a crafted Makefile
to do this. That results in extra quoting to get filename containing
newline to work correctly.

@strong{make -j} has no support for grouping the output, therefore output
may run together, e.g. the first half of a line is from one process
and the last half of the line is from another process. The example
@strong{Parallel grep} cannot be done reliably with @strong{make -j} because of
this.

(Very early versions of GNU @strong{parallel} were coincidently implemented
using @strong{make -j}).

@section DIFFERENCES BETWEEN ppss AND GNU Parallel
@anchor{DIFFERENCES BETWEEN ppss AND GNU Parallel}

@strong{ppss} is also a tool for running jobs in parallel.

The output of @strong{ppss} is status information and thus not useful for
using as input for another command. The output from the jobs are put
into files.

The argument replace string ($ITEM) cannot be changed. Arguments must
be quoted - thus arguments containing special characters (space '"&!*)
may cause problems. More than one argument is not supported. File
names containing newlines are not processed correctly. When reading
input from a file null cannot be used as a terminator. @strong{ppss} needs
to read the whole input file before starting any jobs.

Output and status information is stored in ppss_dir and thus requires
cleanup when completed. If the dir is not removed before running
@strong{ppss} again it may cause nothing to happen as @strong{ppss} thinks the
task is already done. GNU @strong{parallel} will normally not need cleaning
up if running locally and will only need cleaning up if stopped
abnormally and running remote (@strong{--cleanup} may not complete if
stopped abnormally). The example @strong{Parallel grep} would require extra
postprocessing if written using @strong{ppss}.

For remote systems PPSS requires 3 steps: config, deploy, and
start. GNU @strong{parallel} only requires one step.

@subsection EXAMPLES FROM ppss MANUAL
@anchor{EXAMPLES FROM ppss MANUAL}

Here are the examples from @strong{ppss}'s manual page with the equivalent
using GNU @strong{parallel}:

@strong{1} ./ppss.sh standalone -d /path/to/files -c 'gzip '

@strong{1} find /path/to/files -type f | parallel gzip

@strong{2} ./ppss.sh standalone -d /path/to/files -c 'cp "$ITEM" /destination/dir '

@strong{2} find /path/to/files -type f | parallel cp @{@} /destination/dir

@strong{3} ./ppss.sh standalone -f list-of-urls.txt -c 'wget -q '

@strong{3} parallel -a list-of-urls.txt wget -q

@strong{4} ./ppss.sh standalone -f list-of-urls.txt -c 'wget -q "$ITEM"'

@strong{4} parallel -a list-of-urls.txt wget -q @{@}

@strong{5} ./ppss config -C config.cfg -c 'encode.sh ' -d /source/dir -m
192.168.1.100 -u ppss -k ppss-key.key -S ./encode.sh -n nodes.txt -o
/some/output/dir --upload --download ; ./ppss deploy -C config.cfg ;
./ppss start -C config

@strong{5} # parallel does not use configs. If you want a different username put it in nodes.txt: user@@hostname

@strong{5} find source/dir -type f | parallel --sshloginfile nodes.txt --trc @{.@}.mp3 lame -a @{@} -o @{.@}.mp3 --preset standard --quiet

@strong{6} ./ppss stop -C config.cfg

@strong{6} killall -TERM parallel

@strong{7} ./ppss pause -C config.cfg

@strong{7} Press: CTRL-Z or killall -SIGTSTP parallel

@strong{8} ./ppss continue -C config.cfg

@strong{8} Enter: fg or killall -SIGCONT parallel

@strong{9} ./ppss.sh status -C config.cfg

@strong{9} killall -SIGUSR2 parallel

@section DIFFERENCES BETWEEN pexec AND GNU Parallel
@anchor{DIFFERENCES BETWEEN pexec AND GNU Parallel}

@strong{pexec} is also a tool for running jobs in parallel.

Here are the examples from @strong{pexec}'s info page with the equivalent
using GNU @strong{parallel}:

@strong{1} pexec -o sqrt-%s.dat -p "$(seq 10)" -e NUM -n 4 -c -- \
  'echo "scale=10000;sqrt($NUM)" | bc'

@strong{1} seq 10 | parallel -j4 'echo "scale=10000;sqrt(@{@})" | bc > sqrt-@{@}.dat'

@strong{2} pexec -p "$(ls myfiles*.ext)" -i %s -o %s.sort -- sort

@strong{2} ls myfiles*.ext | parallel sort @{@} ">@{@}.sort"

@strong{3} pexec -f image.list -n auto -e B -u star.log -c -- \
  'fistar $B.fits -f 100 -F id,x,y,flux -o $B.star'

@strong{3} parallel -a image.list \
  'fistar @{@}.fits -f 100 -F id,x,y,flux -o @{@}.star' 2>star.log

@strong{4} pexec -r *.png -e IMG -c -o - -- \
  'convert $IMG $@{IMG%.png@}.jpeg ; "echo $IMG: done"'

@strong{4} ls *.png | parallel 'convert @{@} @{.@}.jpeg; echo @{@}: done'

@strong{5} pexec -r *.png -i %s -o %s.jpg -c 'pngtopnm | pnmtojpeg'

@strong{5} ls *.png | parallel 'pngtopnm < @{@} | pnmtojpeg > @{@}.jpg'

@strong{6} for p in *.png ; do echo $@{p%.png@} ; done | \
  pexec -f - -i %s.png -o %s.jpg -c 'pngtopnm | pnmtojpeg'

@strong{6} ls *.png | parallel 'pngtopnm < @{@} | pnmtojpeg > @{.@}.jpg'

@strong{7} LIST=$(for p in *.png ; do echo $@{p%.png@} ; done)
  pexec -r $LIST -i %s.png -o %s.jpg -c 'pngtopnm | pnmtojpeg'

@strong{7} ls *.png | parallel 'pngtopnm < @{@} | pnmtojpeg > @{.@}.jpg'

@strong{8} pexec -n 8 -r *.jpg -y unix -e IMG -c \
  'pexec -j -m blockread -d $IMG | \
  jpegtopnm | pnmscale 0.5 | pnmtojpeg | \
  pexec -j -m blockwrite -s th_$IMG'

@strong{8} Combining GNU @strong{parallel} and GNU @strong{sem}.

@strong{8} ls *jpg | parallel -j8 'sem --id blockread cat @{@} | jpegtopnm |' \
  'pnmscale 0.5 | pnmtojpeg | sem --id blockwrite cat > th_@{@}'

@strong{8} If reading and writing is done to the same disk, this may be
faster as only one process will be either reading or writing:

@strong{8} ls *jpg | parallel -j8 'sem --id diskio cat @{@} | jpegtopnm |' \
  'pnmscale 0.5 | pnmtojpeg | sem --id diskio cat > th_@{@}'

@section DIFFERENCES BETWEEN xjobs AND GNU Parallel
@anchor{DIFFERENCES BETWEEN xjobs AND GNU Parallel}

@strong{xjobs} is also a tool for running jobs in parallel. It only supports
running jobs on your local computer.

@strong{xjobs} deals badly with special characters just like @strong{xargs}. See
the section @strong{DIFFERENCES BETWEEN xargs AND GNU Parallel}.

Here are the examples from @strong{xjobs}'s man page with the equivalent
using GNU @strong{parallel}:

@strong{1} ls -1 *.zip | xjobs unzip

@strong{1} ls *.zip | parallel unzip

@strong{2} ls -1 *.zip | xjobs -n unzip

@strong{2} ls *.zip | parallel unzip >/dev/null

@strong{3} find . -name '*.bak' | xjobs gzip

@strong{3} find . -name '*.bak' | parallel gzip

@strong{4} ls -1 *.jar | sed 's/\(.*\)/\1 > \1.idx/' | xjobs jar tf

@strong{4} ls *.jar | parallel jar tf @{@} '>' @{@}.idx

@strong{5} xjobs -s script

@strong{5} cat script | parallel

@strong{6} mkfifo /var/run/my_named_pipe;
xjobs -s /var/run/my_named_pipe &
echo unzip 1.zip >> /var/run/my_named_pipe;
echo tar cf /backup/myhome.tar /home/me >> /var/run/my_named_pipe

@strong{6} mkfifo /var/run/my_named_pipe;
cat /var/run/my_named_pipe | parallel &
echo unzip 1.zip >> /var/run/my_named_pipe;
echo tar cf /backup/myhome.tar /home/me >> /var/run/my_named_pipe

@section DIFFERENCES BETWEEN prll AND GNU Parallel
@anchor{DIFFERENCES BETWEEN prll AND GNU Parallel}

@strong{prll} is also a tool for running jobs in parallel. It does not
support running jobs on remote computers.

@strong{prll} encourages using BASH aliases and BASH functions instead of
scripts. GNU @strong{parallel} will never support running aliases (see why
http://www.perlmonks.org/index.pl?node_id=484296). However, scripts,
composed commands, or functions exported with @strong{export -f} work just
fine.

@strong{prll} generates a lot of status information on stderr (standard
error) which makes it harder to use the stderr (standard error) output
of the job directly as input for another program.

Here is the example from @strong{prll}'s man page with the equivalent
using GNU @strong{parallel}:

prll -s 'mogrify -flip $1' *.jpg

parallel mogrify -flip ::: *.jpg

@section DIFFERENCES BETWEEN dxargs AND GNU Parallel
@anchor{DIFFERENCES BETWEEN dxargs AND GNU Parallel}

@strong{dxargs} is also a tool for running jobs in parallel.

@strong{dxargs} does not deal well with more simultaneous jobs than SSHD's
MaxStartup. @strong{dxargs} is only built for remote run jobs, but does not
support transferring of files.

@section DIFFERENCES BETWEEN mdm/middleman AND GNU Parallel
@anchor{DIFFERENCES BETWEEN mdm/middleman AND GNU Parallel}

middleman(mdm) is also a tool for running jobs in parallel.

Here are the shellscripts of http://mdm.berlios.de/usage.html ported
to GNU @strong{parallel}:

@strong{seq 19 | parallel buffon -o - | sort -n }>@strong{ result}

@strong{cat files | parallel cmd}

@strong{find dir -execdir sem cmd @{@} \;}

@section DIFFERENCES BETWEEN xapply AND GNU Parallel
@anchor{DIFFERENCES BETWEEN xapply AND GNU Parallel}

@strong{xapply} can run jobs in parallel on the local computer.

Here are the examples from @strong{xapply}'s man page with the equivalent
using GNU @strong{parallel}:

@strong{1} xapply '(cd %1 && make all)' */

@strong{1} parallel 'cd @{@} && make all' ::: */

@strong{2} xapply -f 'diff %1 ../version5/%1' manifest | more

@strong{2} parallel diff @{@} ../version5/@{@} < manifest | more

@strong{3} xapply -p/dev/null -f 'diff %1 %2' manifest1 checklist1

@strong{3} parallel --xapply diff @{1@} @{2@} :::: manifest1 checklist1

@strong{4} xapply 'indent' *.c

@strong{4} parallel indent ::: *.c

@strong{5} find ~ksb/bin -type f ! -perm -111 -print | xapply -f -v 'chmod a+x' -

@strong{5} find ~ksb/bin -type f ! -perm -111 -print | parallel -v chmod a+x

@strong{6} find */ -... | fmt 960 1024 | xapply -f -i /dev/tty 'vi' -

@strong{6} sh <(find */ -... | parallel -s 1024 echo vi)

@strong{6} find */ -... | parallel -s 1024 -Xuj1 vi

@strong{7} find ... | xapply -f -5 -i /dev/tty 'vi' - - - - -

@strong{7} sh <(find ... |parallel -n5 echo vi)

@strong{7} find ... |parallel -n5 -uj1 vi

@strong{8} xapply -fn "" /etc/passwd

@strong{8} parallel -k echo < /etc/passwd

@strong{9} tr ':' '\012' < /etc/passwd | xapply -7 -nf 'chown %1 %6' - - - - - - -

@strong{9} tr ':' '\012' < /etc/passwd | parallel -N7 chown @{1@} @{6@}

@strong{10} xapply '[ -d %1/RCS ] || echo %1' */

@strong{10} parallel '[ -d @{@}/RCS ] || echo @{@}' ::: */

@strong{11} xapply -f '[ -f %1 ] && echo %1' List | ...

@strong{11} parallel '[ -f @{@} ] && echo @{@}' < List | ...

@section DIFFERENCES BETWEEN paexec AND GNU Parallel
@anchor{DIFFERENCES BETWEEN paexec AND GNU Parallel}

@strong{paexec} can run jobs in parallel on both the local and remote computers.

@strong{paexec} requires commands to print a blank line as the last
output. This means you will have to write a wrapper for most programs.

@strong{paexec} has a job dependency facility so a job can depend on another
job to be executed successfully. Sort of a poor-man's @strong{make}.

Here are the examples from @strong{paexec}'s example catalog with the equivalent
using GNU @strong{parallel}:

@table @asis
@item 1_div_X_run:
@anchor{1_div_X_run:}

@verbatim
  ../../paexec -s -l -c "`pwd`/1_div_X_cmd" -n +1 <<EOF [...]
  parallel echo {} '|' `pwd`/1_div_X_cmd <<EOF [...]
@end verbatim

@item all_substr_run:
@anchor{all_substr_run:}

@verbatim
  ../../paexec -lp -c "`pwd`/all_substr_cmd" -n +3 <<EOF [...]
  parallel echo {} '|' `pwd`/all_substr_cmd <<EOF [...]
@end verbatim

@item cc_wrapper_run:
@anchor{cc_wrapper_run:}

@verbatim
  ../../paexec -c "env CC=gcc CFLAGS=-O2 `pwd`/cc_wrapper_cmd" \
             -n 'host1 host2' \
             -t '/usr/bin/ssh -x' <<EOF [...]
  parallel echo {} '|' "env CC=gcc CFLAGS=-O2 `pwd`/cc_wrapper_cmd" \
             -S host1,host2 <<EOF [...]
  # This is not exactly the same, but avoids the wrapper
  parallel gcc -O2 -c -o {.}.o {} \
             -S host1,host2 <<EOF [...]
@end verbatim

@item toupper_run:
@anchor{toupper_run:}

@verbatim
  ../../paexec -lp -c "`pwd`/toupper_cmd" -n +10 <<EOF [...]
  parallel echo {} '|' ./toupper_cmd <<EOF [...]
  # Without the wrapper:
  parallel echo {} '| awk {print\ toupper\(\$0\)}' <<EOF [...]
@end verbatim

@end table

@section DIFFERENCES BETWEEN ClusterSSH AND GNU Parallel
@anchor{DIFFERENCES BETWEEN ClusterSSH AND GNU Parallel}

ClusterSSH solves a different problem than GNU @strong{parallel}.

ClusterSSH opens a terminal window for each computer and using a
master window you can run the same command on all the computers. This
is typically used for administrating several computers that are almost
identical.

GNU @strong{parallel} runs the same (or different) commands with different
arguments in parallel possibly using remote computers to help
computing. If more than one computer is listed in @strong{-S} GNU @strong{parallel} may
only use one of these (e.g. if there are 8 jobs to be run and one
computer has 8 cores).

GNU @strong{parallel} can be used as a poor-man's version of ClusterSSH:

@strong{parallel --nonall -S server-a,server-b do_stuff foo bar}

@chapter BUGS
@anchor{BUGS}

@section Quoting of newline
@anchor{Quoting of newline}

Because of the way newline is quoted this will not work:

echo 1,2,3 | parallel -vkd, "echo 'a@{@}b'"

However, these will all work:

echo 1,2,3 | parallel -vkd, echo a@{@}b

echo 1,2,3 | parallel -vkd, "echo 'a'@{@}'b'"

echo 1,2,3 | parallel -vkd, "echo 'a'"@{@}"'b'"

@section Speed
@anchor{Speed}

@subsection Startup
@anchor{Startup}

GNU @strong{parallel} is slow at starting up - around 250 ms. Half of the
startup time is spent finding the maximal length of a command
line. Setting @strong{-s} will remove this part of the startup time.

@subsection Job startup
@anchor{Job startup}

Starting a job on the local machine takes around 3 ms. This can be a
big overhead if the job takes very few ms to run. Often you can group
small jobs together using @strong{-X} which will make the overhead less
significant.

Using @strong{--ungroup} the 3 ms can be lowered to around 2 ms.

@subsection SSH
@anchor{SSH}

When using multiple computers GNU @strong{parallel} opens @strong{ssh} connections
to them to figure out how many connections can be used reliably
simultaneously (Namely SSHD's MaxStartup). This test is done for each
host in serial, so if your @strong{--sshloginfile} contains many hosts it may
be slow.

If your jobs are short you may see that there are fewer jobs running
on the remove systems than expected. This is due to time spent logging
in and out. @strong{-M} may help here.

@subsection Disk access
@anchor{Disk access}

A single disk can normally read data faster if it reads one file at a
time instead of reading a lot of files in parallel, as this will avoid
disk seeks. However, newer disk systems with multiple drives can read
faster if reading from multiple files in parallel.

If the jobs are of the form read-all-compute-all-write-all, so
everything is read before anything is written, it may be faster to
force only one disk access at the time:

@verbatim
  sem --id diskio cat file | compute | sem --id diskio cat > file
@end verbatim

If the jobs are of the form read-compute-write, so writing starts
before all reading is done, it may be faster to force only one reader
and writer at the time:

@verbatim
  sem --id read cat file | compute | sem --id write cat > file
@end verbatim

If the jobs are of the form read-compute-read-compute, it may be
faster to run more jobs in parallel than the system has CPUs, as some
of the jobs will be stuck waiting for disk access.

@section --nice limits command length
@anchor{--nice limits command length}

The current implementation of @strong{--nice} is too pessimistic in the max
allowed command length. It only uses a little more than half of what
it could. This affects @strong{-X} and @strong{-m}. If this becomes a real problem for
you file a bug-report.

@section Aliases and functions do not work
@anchor{Aliases and functions do not work}

If you get:

@strong{Can't exec "@emph{command}": No such file or directory}

or:

@strong{open3: exec of by @emph{command} failed}

it may be because @emph{command} is not known, but it could also be
because @emph{command} is an alias or a function. If it is a function you
need to @strong{export -f} the function first. An alias will, however, not
work (see why http://www.perlmonks.org/index.pl?node_id=484296), so
change your alias to a script.

@chapter REPORTING BUGS
@anchor{REPORTING BUGS}

Report bugs to <bug-parallel@@gnu.org> or
https://savannah.gnu.org/bugs/?func=additem&group=parallel

Your bug report should always include:

@itemize
@item The output of @strong{parallel --version}. If you are not running the latest
released version you should specify why you believe the problem is not
fixed in that version.

@item A complete example that others can run that shows the problem. A
combination of @strong{seq}, @strong{cat}, @strong{echo}, and @strong{sleep} can reproduce
most errors. If your example requires large files, see if you can make
them by something like @strong{seq 1000000} > @strong{file}.

@item The output of your example. If your problem is not easily reproduced
by others, the output might help them figure out the problem.

@end itemize

If you suspect the error is dependent on your distribution, please see
if you can reproduce the error on one of these VirtualBox images:
http://sourceforge.net/projects/virtualboximage/files/

Specifying the name of your distribution is not enough as you may have
installed software that is not in the VirtualBox images.

If you cannot reproduce the error on any of the VirtualBox images
above, you should assume the debugging will be done through you. That
will put more burden on you and it is extra important you give any
information that help.

@chapter AUTHOR
@anchor{AUTHOR}

When using GNU @strong{parallel} for a publication please cite:

O. Tange (2011): GNU Parallel - The Command-Line Power Tool, ;login:
The USENIX Magazine, February 2011:42-47.

Copyright (C) 2007-10-18 Ole Tange, http://ole.tange.dk

Copyright (C) 2008,2009,2010 Ole Tange, http://ole.tange.dk

Copyright (C) 2010,2011,2012 Ole Tange, http://ole.tange.dk and Free
Software Foundation, Inc.

Parts of the manual concerning @strong{xargs} compatibility is inspired by
the manual of @strong{xargs} from GNU findutils 4.4.2.

@chapter LICENSE
@anchor{LICENSE}

Copyright (C) 2007,2008,2009,2010,2011,2012 Free Software Foundation,
Inc.

This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 3 of the License, or
at your option any later version.

This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
GNU General Public License for more details.

You should have received a copy of the GNU General Public License
along with this program.  If not, see <http://www.gnu.org/licenses/>.

@section Documentation license I
@anchor{Documentation license I}

Permission is granted to copy, distribute and/or modify this documentation
under the terms of the GNU Free Documentation License, Version 1.3 or
any later version published by the Free Software Foundation; with no
Invariant Sections, with no Front-Cover Texts, and with no Back-Cover
Texts.  A copy of the license is included in the file fdl.txt.

@section Documentation license II
@anchor{Documentation license II}

You are free:

@table @asis
@item @strong{to Share}
@anchor{@strong{to Share}}

to copy, distribute and transmit the work

@item @strong{to Remix}
@anchor{@strong{to Remix}}

to adapt the work

@end table

Under the following conditions:

@table @asis
@item @strong{Attribution}
@anchor{@strong{Attribution}}

You must attribute the work in the manner specified by the author or
licensor (but not in any way that suggests that they endorse you or
your use of the work).

@item @strong{Share Alike}
@anchor{@strong{Share Alike}}

If you alter, transform, or build upon this work, you may distribute
the resulting work only under the same, similar or a compatible
license.

@end table

With the understanding that:

@table @asis
@item @strong{Waiver}
@anchor{@strong{Waiver}}

Any of the above conditions can be waived if you get permission from
the copyright holder.

@item @strong{Public Domain}
@anchor{@strong{Public Domain}}

Where the work or any of its elements is in the public domain under
applicable law, that status is in no way affected by the license.

@item @strong{Other Rights}
@anchor{@strong{Other Rights}}

In no way are any of the following rights affected by the license:

@itemize
@item Your fair dealing or fair use rights, or other applicable
copyright exceptions and limitations;

@item The author's moral rights;

@item Rights other persons may have either in the work itself or in
how the work is used, such as publicity or privacy rights.

@end itemize

@end table

@table @asis
@item @strong{Notice}
@anchor{@strong{Notice}}

For any reuse or distribution, you must make clear to others the
license terms of this work.

@end table

A copy of the full license is included in the file as cc-by-sa.txt.

@chapter DEPENDENCIES
@anchor{DEPENDENCIES}

GNU @strong{parallel} uses Perl, and the Perl modules Getopt::Long,
IPC::Open3, Symbol, IO::File, POSIX, and File::Temp. For remote usage
it also uses rsync with ssh.

@chapter SEE ALSO
@anchor{SEE ALSO}

@strong{ssh}(1), @strong{rsync}(1), @strong{find}(1), @strong{xargs}(1), @strong{dirname},
@strong{make}(1), @strong{pexec}(1), @strong{ppss}(1), @strong{xjobs}(1), @strong{prll}(1),
@strong{dxargs}(1), @strong{mdm}(1),

@bye