diff --git a/NEWS b/NEWS
index 5a8074f1..7cfce0a9 100644
--- a/NEWS
+++ b/NEWS
@@ -8,9 +8,11 @@ New in this release:
 
 News about GNU Parallel:
 
-* Bash: GNU Parallel with Curl https://gist.github.com/CMCDragonkai/5914e02df62137e47f32?permalink_comment_id=2617456
+* Bash: GNU Parallel with Curl
+  https://gist.github.com/CMCDragonkai/5914e02df62137e47f32?permalink_comment_id=2617456
 
-* The Pipe Operator Explained https://medium.com/geekculture/the-pipe-operator-explained-cbd41e23775a
+* The Pipe Operator Explained
+  https://medium.com/geekculture/the-pipe-operator-explained-cbd41e23775a
 
 
 20220222
diff --git a/doc/citation-notice-faq.txt b/doc/citation-notice-faq.txt
index 5c087d87..d244ce53 100644
--- a/doc/citation-notice-faq.txt
+++ b/doc/citation-notice-faq.txt
@@ -218,9 +218,29 @@ notice, if that means I can stop worrying about rent, mortgages, bills
 and retirement.
 
 
-== I do not want to cite ==
+== Would it not be hell if all tools showed a citation notice? ==
 
-If you do not want to cite, then you should use another tool.
+Most software is not financed through citations, thus this is unlikely
+to happen.
+
+You can even get GNU Parallel in a version with the citation notice
+silenced and which you do not have to cite: You just have to pay for
+it and help finance the development that way.
+
+A lot of tools requires configuration before use, or give you 'OK. Do
+not show this again'-dialog boxes until you silence those, so it is
+not uncommon, that you have to do a little extra work, when running
+the software for the first time.
+
+Running 'parallel --citation' takes less than 10 seconds to run, and
+if GNU Parallel does not save you 10 seconds, then you should probably
+use a different tool.
+
+
+== I do not want to cite and do not want to help fund development ==
+
+If you neither want to cite nor fund development, then you should use
+another tool.
 
 If you do not want to help fund GNU Parallel, then you will not be a
 happy GNU Parallel user, and thus you using another tool is the best
@@ -236,6 +256,8 @@ after installing GNU Parallel is too big, then you do not have to do
 it. You only need to do that if you do not want to see the citation
 notice.
 
+You can also buy a version with the citation notice silenced.
+
 But it really only takes 10 seconds to run.
 
 
diff --git a/doc/haikus b/doc/haikus
index 59281f3d..a486d1ea 100644
--- a/doc/haikus
+++ b/doc/haikus
@@ -4,8 +4,8 @@
  
 Quote of the month:
 
-  wow gnu parallel fucking rules
-    -- senior polycule reliability engineer @ilianathewitch@twitter
+  Tool, was ich sehr ausgiebig nutze inzwischen und lieben gelernt habe: "GNU parallel"
+    -- nuit @nv1t@twitter
 
   아 parallel 너무 좋지요.
     -- 어엉부엉@d_ijk_stra
diff --git a/doc/release_new_version b/doc/release_new_version
index 6ec41d09..6cc3161e 100644
--- a/doc/release_new_version
+++ b/doc/release_new_version
@@ -254,7 +254,7 @@ from:tange@gnu.org
 to:parallel@gnu.org, bug-parallel@gnu.org
 stable-bcc: Jesse Alama <jessealama@fastmail.fm>
 
-Subject: GNU Parallel 20220422 ('albright<<>>') released [stable]
+Subject: GNU Parallel 20220422 ('#SlavaUkrayini🌻 albright<<>>') released [stable]
 
 GNU Parallel 20220422 ('<<>>') has been released. It is available for download at: lbry://@GnuParallel:4
 
diff --git a/src/parallel b/src/parallel
index c287fa73..200a5a8c 100755
--- a/src/parallel
+++ b/src/parallel
@@ -1669,7 +1669,7 @@ sub options_hash() {
 	 "link|xapply" => \$opt::link,
 	 "linkinputsource|xapplyinputsource=i" => \@opt::linkinputsource,
 	 # Before changing these lines, please read
-	 # https://www.gnu.org/software/parallel/parallel_design.html#Citation-notice
+	 # https://www.gnu.org/software/parallel/parallel_design.html#citation-notice
 	 # https://git.savannah.gnu.org/cgit/parallel.git/tree/doc/citation-notice-faq.txt
 	 # You accept to be put in a public hall of shame by removing
 	 # these lines.
@@ -1833,7 +1833,7 @@ sub parse_options(@) {
     @ARGV = read_options();
 
     # Before changing these line, please read
-    # https://www.gnu.org/software/parallel/parallel_design.html#Citation-notice
+    # https://www.gnu.org/software/parallel/parallel_design.html#citation-notice
     # https://git.savannah.gnu.org/cgit/parallel.git/tree/doc/citation-notice-faq.txt
     # You accept to be added to a public hall of shame by
     # removing the lines.
@@ -4022,7 +4022,7 @@ sub progress() {
 	my $width = int($terminal_width * $pctcomplete);
 	substr($s,$width,0) = $reset;
 	my $zenity = sprintf("%-${terminal_width}s",
-			     substr("#	 $eta sec $arg",
+			     substr("#   $eta sec $arg",
 				    0,$terminal_width));
 	$s = "\r" . $zenity . "\r" . $pctcomplete*100 . # Prefix with zenity header
 	    "\r" . $rev . $s . $reset;
@@ -5158,7 +5158,7 @@ sub usage() {
 	 "  Zenodo. https://doi.org/10.5281/zenodo.6377950",
 	 "",
 	 # Before changing these lines,	 please read
-	 # https://www.gnu.org/software/parallel/parallel_design.html#Citation-notice
+	 # https://www.gnu.org/software/parallel/parallel_design.html#citation-notice
 	 # https://git.savannah.gnu.org/cgit/parallel.git/tree/doc/citation-notice-faq.txt	 
 	 # You accept to be put in a public hall of shame by removing
 	 # these lines.
@@ -5191,7 +5191,7 @@ sub citation_notice() {
 	     "  Zenodo. https://doi.org/10.5281/zenodo.6377950",
 	     "",
 	     # Before changing these line,  please read
-	     # https://www.gnu.org/software/parallel/parallel_design.html#Citation-notice and
+	     # https://www.gnu.org/software/parallel/parallel_design.html#citation-notice and
 	     # https://git.savannah.gnu.org/cgit/parallel.git/tree/doc/citation-notice-faq.txt
 	     # You accept to be put in a public hall of shame by
 	     # removing these lines.
@@ -5199,7 +5199,7 @@ sub citation_notice() {
 	     "If you pay 10000 EUR you should feel free to use GNU Parallel without citing.",
 	     "",
 	     "More about funding GNU Parallel and the citation notice:",
-	     "https://www.gnu.org/software/parallel/parallel_design.html#Citation-notice",
+	     "https://www.gnu.org/software/parallel/parallel_design.html#citation-notice",
 	     "",
 	     "To silence this citation notice: run 'parallel --citation' once.",
 	     ""
@@ -5329,7 +5329,7 @@ sub citation() {
 	"(Feel free to use \\nocite{tange_2022_6377950})",
 	"",
 	# Before changing these lines, please read
-	# https://www.gnu.org/software/parallel/parallel_design.html#Citation-notice and
+	# https://www.gnu.org/software/parallel/parallel_design.html#citation-notice and
 	# https://git.savannah.gnu.org/cgit/parallel.git/tree/doc/citation-notice-faq.txt
 	# You accept to be put in a public hall of shame by removing
 	# these lines.
@@ -5338,7 +5338,7 @@ sub citation() {
 	"",
 	"More about funding GNU Parallel and the citation notice:",
 	"https://lists.gnu.org/archive/html/parallel/2013-11/msg00006.html",
-	"https://www.gnu.org/software/parallel/parallel_design.html#Citation-notice",
+	"https://www.gnu.org/software/parallel/parallel_design.html#citation-notice",
 	"https://git.savannah.gnu.org/cgit/parallel.git/tree/doc/citation-notice-faq.txt",
 	"",
 	"If you send a copy of your published article to tange\@gnu.org, it will be",
@@ -9542,7 +9542,8 @@ sub sshlogin_wrap($) {
 	if(not $monitor_parent_sshd_script) {
 	    $monitor_parent_sshd_script =
 		# This will be packed in ', so only use "
-		::spacefree(0,'$shell = "'.($ENV{'PARALLEL_SHELL'} || '$ENV{SHELL}').'";'.
+		::spacefree
+		(0,'$shell = "'.($ENV{'PARALLEL_SHELL'} || '$ENV{SHELL}').'";'.
 			    '$tmpdir = $ENV{"TMPDIR"} || "'.
 			    ::perl_quote_scalar($ENV{'PARALLEL_REMOTE_TMPDIR'}).'";'.
 			    '$nice = '.$opt::nice.';'.
@@ -9560,7 +9561,7 @@ sub sshlogin_wrap($) {
 		} while(-e $ENV{PARALLEL_TMP});
 		# Set $script to a non-existent file name in $TMPDIR
 		do {
-		    $script = $tmpdir."/par".
+		    $script = $tmpdir."/par-job-$ENV{PARALLEL_SEQ}_".
 			join"", map { (0..9,"a".."z","A".."Z")[rand(62)] } (1..5);
 		} while(-e $script);
 		# Create a script from the hex code
diff --git a/testsuite/tests-to-run/parallel-local-10s.sh b/testsuite/tests-to-run/parallel-local-10s.sh
index b9f7c5c3..4fc1c32a 100644
--- a/testsuite/tests-to-run/parallel-local-10s.sh
+++ b/testsuite/tests-to-run/parallel-local-10s.sh
@@ -11,16 +11,16 @@
 par_reload_slf_every_second() {
     echo "### --slf should reload every second"
     tmp=$(mktemp)
-    echo 5/lo >"$tmp"
+    echo 1/lo >"$tmp"
     (
 	sleep 3
-	(echo 5/nlv.pi.dk
-	 echo 5/localhost
-	 echo 5/127.0.0.1) >>"$tmp"
+	(echo 1/localhost
+	 echo 1/127.0.0.1) >>"$tmp"
     ) &
-    # This used to take 20 seconds
-    seq 20 |
-	stdout /usr/bin/time -f %e parallel --slf "$tmp" 'true {};sleep 10' |
+    # This used to take 20 seconds (version 20220322) because the
+    # updated --slf would only read after first job finished
+    seq 3 |
+	stdout /usr/bin/time -f %e parallel-20220322 --slf "$tmp" 'true {};sleep 10' |
         perl -ne '$_ < 20 and print "OK\n"'
     rm "$tmp"
 }