tange/parallel
1
0
Fork 0
mirror of https://git.savannah.gnu.org/git/parallel.git synced 2024-11-22 14:07:55 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
parallel/src/parallel.pod
Ole Tange efec4ca8a2 Released as 20180622 ('KimTrump')
2018-06-21 00:10:08 +02:00

4931 lines
142 KiB
Plaintext
Raw Blame History

#!/usr/bin/perl -w
=encoding utf8
=head1 NAME
parallel - build and execute shell command lines from standard input in parallel
=head1 SYNOPSIS
B<parallel> [options] [I<command> [arguments]] < list_of_arguments
B<parallel> [options] [I<command> [arguments]] ( B<:::> arguments | B<:::+> arguments |
B<::::> argfile(s) | B<::::+> argfile(s) ) ...
B<parallel> --semaphore [options] I<command>
B<#!/usr/bin/parallel> --shebang [options] [I<command> [arguments]]
B<#!/usr/bin/parallel> --shebang-wrap [options] [I<command> [arguments]]
=head1 DESCRIPTION
STOP!
Read the B<Reader's guide> below if you are new to GNU B<parallel>.
GNU B<parallel> is a shell tool for executing jobs in parallel using
one or more computers. A job can be a single command or a small
script that has to be run for each of the lines in the input. The
typical input is a list of files, a list of hosts, a list of users, a
list of URLs, or a list of tables. A job can also be a command that
reads from a pipe. GNU B<parallel> can then split the input into
blocks and pipe a block into each command in parallel.
If you use xargs and tee today you will find GNU B<parallel> very easy to
use as GNU B<parallel> is written to have the same options as xargs. If
you write loops in shell, you will find GNU B<parallel> may be able to
replace most of the loops and make them run faster by running several
jobs in parallel.
GNU B<parallel> makes sure output from the commands is the same output as
you would get had you run the commands sequentially. This makes it
possible to use output from GNU B<parallel> as input for other programs.
For each line of input GNU B<parallel> will execute I<command> with
the line as arguments. If no I<command> is given, the line of input is
executed. Several lines will be run in parallel. GNU B<parallel> can
often be used as a substitute for B<xargs> or B<cat | bash>.
=head2 Reader's guide
If you prefer reading a book buy B<GNU Parallel 2018> at
http://www.lulu.com/shop/ole-tange/gnu-parallel-2018/paperback/product-23558902.html
or download it at: https://doi.org/10.5281/zenodo.1146014
Otherwise start by watching the intro videos for a quick introduction:
http://www.youtube.com/playlist?list=PL284C9FF2488BC6D1
Then look at the B<EXAMPLE>s after the list of B<OPTIONS> (Use
B<LESS=+/EXAMPLE: man parallel>). That will give you an idea of what
GNU B<parallel> is capable of.
Then spend an hour walking through the tutorial (B<man
parallel_tutorial>). Your command line will love you for it.
Finally you may want to look at the rest of this manual if you have
special needs not already covered.
If you want to know the design decisions behind GNU B<parallel>, try:
B<man parallel_design>. This is also a good intro if you intend to
change GNU B<parallel>.
=head1 OPTIONS
=over 4
=item I<command>
Command to execute. If I<command> or the following arguments contain
replacement strings (such as B<{}>) every instance will be substituted
with the input.
If I<command> is given, GNU B<parallel> solve the same tasks as
B<xargs>. If I<command> is not given GNU B<parallel> will behave
similar to B<cat | sh>.
The I<command> must be an executable, a script, a composed command, an
alias, or a function.
B<Bash functions>: B<export -f> the function first or use B<env_parallel>.
B<Bash, Csh, or Tcsh aliases>: Use B<env_parallel>.
B<Zsh, Fish, Ksh, and Pdksh functions and aliases>: Use B<env_parallel>.
=item B<{}>
Input line. This replacement string will be replaced by a full line
read from the input source. The input source is normally stdin
(standard input), but can also be given with B<-a>, B<:::>, or
B<::::>.
The replacement string B<{}> can be changed with B<-I>.
If the command line contains no replacement strings then B<{}> will be
appended to the command line.
Replacement strings are normally quoted, so special characters are not
parsed by the shell. The exception is if the command starts with a
replacement string; then the string is not quoted.
=item B<{.}>
Input line without extension. This replacement string will be replaced
by the input with the extension removed. If the input line contains
B<.> after the last B</> the last B<.> till the end of the string will
be removed and B<{.}> will be replaced with the
remaining. E.g. I<foo.jpg> becomes I<foo>, I<subdir/foo.jpg> becomes
I<subdir/foo>, I<sub.dir/foo.jpg> becomes I<sub.dir/foo>,
I<sub.dir/bar> remains I<sub.dir/bar>. If the input line does not
contain B<.> it will remain unchanged.
The replacement string B<{.}> can be changed with B<--er>.
To understand replacement strings see B<{}>.
=item B<{/}>
Basename of input line. This replacement string will be replaced by
the input with the directory part removed.
The replacement string B<{/}> can be changed with
B<--basenamereplace>.
To understand replacement strings see B<{}>.
=item B<{//}>
Dirname of input line. This replacement string will be replaced by the
dir of the input line. See B<dirname>(1).
The replacement string B<{//}> can be changed with
B<--dirnamereplace>.
To understand replacement strings see B<{}>.
=item B<{/.}>
Basename of input line without extension. This replacement string will
be replaced by the input with the directory and extension part
removed. It is a combination of B<{/}> and B<{.}>.
The replacement string B<{/.}> can be changed with
B<--basenameextensionreplace>.
To understand replacement strings see B<{}>.
=item B<{#}>
Sequence number of the job to run. This replacement string will be
replaced by the sequence number of the job being run. It contains the
same number as $PARALLEL_SEQ.
The replacement string B<{#}> can be changed with B<--seqreplace>.
To understand replacement strings see B<{}>.
=item B<{%}>
Job slot number. This replacement string will be replaced by the job's
slot number between 1 and number of jobs to run in parallel. There
will never be 2 jobs running at the same time with the same job slot
number.
The replacement string B<{%}> can be changed with B<--slotreplace>.
To understand replacement strings see B<{}>.
=item B<{>I<n>B<}>
Argument from input source I<n> or the I<n>'th argument. This
positional replacement string will be replaced by the input from input
source I<n> (when used with B<-a> or B<::::>) or with the I<n>'th
argument (when used with B<-N>). If I<n> is negative it refers to the
I<n>'th last argument.
To understand replacement strings see B<{}>.
=item B<{>I<n>.B<}>
Argument from input source I<n> or the I<n>'th argument without
extension. It is a combination of B<{>I<n>B<}> and B<{.}>.
This positional replacement string will be replaced by the input from
input source I<n> (when used with B<-a> or B<::::>) or with the
I<n>'th argument (when used with B<-N>). The input will have the
extension removed.
To understand positional replacement strings see B<{>I<n>B<}>.
=item B<{>I<n>/B<}>
Basename of argument from input source I<n> or the I<n>'th argument.
It is a combination of B<{>I<n>B<}> and B<{/}>.
This positional replacement string will be replaced by the input from
input source I<n> (when used with B<-a> or B<::::>) or with the
I<n>'th argument (when used with B<-N>). The input will have the
directory (if any) removed.
To understand positional replacement strings see B<{>I<n>B<}>.
=item B<{>I<n>//B<}>
Dirname of argument from input source I<n> or the I<n>'th argument.
It is a combination of B<{>I<n>B<}> and B<{//}>.
This positional replacement string will be replaced by the dir of the
input from input source I<n> (when used with B<-a> or B<::::>) or with
the I<n>'th argument (when used with B<-N>). See B<dirname>(1).
To understand positional replacement strings see B<{>I<n>B<}>.
=item B<{>I<n>/.B<}>
Basename of argument from input source I<n> or the I<n>'th argument
without extension. It is a combination of B<{>I<n>B<}>, B<{/}>, and
B<{.}>.
This positional replacement string will be replaced by the input from
input source I<n> (when used with B<-a> or B<::::>) or with the
I<n>'th argument (when used with B<-N>). The input will have the
directory (if any) and extension removed.
To understand positional replacement strings see B<{>I<n>B<}>.
=item B<{=>I<perl expression>B<=}>
Replace with calculated I<perl expression>. B<$_> will contain the
same as B<{}>. After evaluating I<perl expression> B<$_> will be used
as the value. It is recommended to only change $_ but you have full
access to all of GNU B<parallel>'s internal functions and data
structures. A few convenience functions and data structures have been
made:
=over 15
=item Z<> B<Q(>I<string>B<)>
shell quote a string
=item Z<> B<pQ(>I<string>B<)>
perl quote a string
=item Z<> B<total_jobs()>
number of jobs in total
=item Z<> B<slot()>
slot number of job
=item Z<> B<seq()>
sequence number of job
=item Z<> B<@arg>
the arguments
=back
Example:
seq 10 | parallel echo {} + 1 is {= '$_++' =}
parallel csh -c {= '$_="mkdir ".Q($_)' =} ::: '12" dir'
seq 50 | parallel echo job {#} of {= '$_=total_jobs()' =}
See also: B<--rpl> B<--parens>
=item B<{=>I<n> I<perl expression>B<=}>
Positional equivalent to B<{=perl expression=}>. To understand
positional replacement strings see B<{>I<n>B<}>.
See also: B<{=perl expression=}> B<{>I<n>B<}>.
=item B<:::> I<arguments>
Use arguments from the command line as input source instead of stdin
(standard input). Unlike other options for GNU B<parallel> B<:::> is
placed after the I<command> and before the arguments.
The following are equivalent:
(echo file1; echo file2) | parallel gzip
parallel gzip ::: file1 file2
parallel gzip {} ::: file1 file2
parallel --arg-sep ,, gzip {} ,, file1 file2
parallel --arg-sep ,, gzip ,, file1 file2
parallel ::: "gzip file1" "gzip file2"
To avoid treating B<:::> as special use B<--arg-sep> to set the
argument separator to something else. See also B<--arg-sep>.
If multiple B<:::> are given, each group will be treated as an input
source, and all combinations of input sources will be
generated. E.g. ::: 1 2 ::: a b c will result in the combinations
(1,a) (1,b) (1,c) (2,a) (2,b) (2,c). This is useful for replacing
nested for-loops.
B<:::> and B<::::> can be mixed. So these are equivalent:
parallel echo {1} {2} {3} ::: 6 7 ::: 4 5 ::: 1 2 3
parallel echo {1} {2} {3} :::: <(seq 6 7) <(seq 4 5) \
:::: <(seq 1 3)
parallel -a <(seq 6 7) echo {1} {2} {3} :::: <(seq 4 5) \
:::: <(seq 1 3)
parallel -a <(seq 6 7) -a <(seq 4 5) echo {1} {2} {3} \
::: 1 2 3
seq 6 7 | parallel -a - -a <(seq 4 5) echo {1} {2} {3} \
::: 1 2 3
seq 4 5 | parallel echo {1} {2} {3} :::: <(seq 6 7) - \
::: 1 2 3
=item B<:::+> I<arguments>
Like B<:::> but linked like B<--link> to the previous input source.
Contrary to B<--link>, values do not wrap: The shortest input source
determines the length.
Example:
parallel echo ::: a b c :::+ 1 2 3 ::: X Y :::+ 11 22
=item B<::::> I<argfiles>
Another way to write B<-a> I<argfile1> B<-a> I<argfile2> ...
B<:::> and B<::::> can be mixed.
See B<-a>, B<:::> and B<--link>.
=item B<::::+> I<argfiles>
Like B<::::> but linked like B<--link> to the previous input source.
Contrary to B<--link>, values do not wrap: The shortest input source
determines the length.
=item B<--null>
=item B<-0>
Use NUL as delimiter. Normally input lines will end in \n
(newline). If they end in \0 (NUL), then use this option. It is useful
for processing arguments that may contain \n (newline).
=item B<--arg-file> I<input-file>
=item B<-a> I<input-file>
Use I<input-file> as input source. If you use this option, stdin
(standard input) is given to the first process run. Otherwise, stdin
(standard input) is redirected from /dev/null.
If multiple B<-a> are given, each I<input-file> will be treated as an
input source, and all combinations of input sources will be
generated. E.g. The file B<foo> contains B<1 2>, the file B<bar>
contains B<a b c>. B<-a foo> B<-a bar> will result in the combinations
(1,a) (1,b) (1,c) (2,a) (2,b) (2,c). This is useful for replacing
nested for-loops.
See also B<--link> and B<{>I<n>B<}>.
=item B<--arg-file-sep> I<sep-str>
Use I<sep-str> instead of B<::::> as separator string between command
and argument files. Useful if B<::::> is used for something else by the
command.
See also: B<::::>.
=item B<--arg-sep> I<sep-str>
Use I<sep-str> instead of B<:::> as separator string. Useful if B<:::>
is used for something else by the command.
Also useful if you command uses B<:::> but you still want to read
arguments from stdin (standard input): Simply change B<--arg-sep> to a
string that is not in the command line.
See also: B<:::>.
=item B<--bar>
Show progress as a progress bar. In the bar is shown: % of jobs
completed, estimated seconds left, and number of jobs started.
It is compatible with B<zenity>:
seq 1000 | parallel -j30 --bar '(echo {};sleep 0.1)' \
2> >(zenity --progress --auto-kill) | wc
=item B<--basefile> I<file>
=item B<--bf> I<file>
I<file> will be transferred to each sshlogin before a job is
started. It will be removed if B<--cleanup> is active. The file may be
a script to run or some common base data needed for the job.
Multiple B<--bf> can be specified to transfer more basefiles. The
I<file> will be transferred the same way as B<--transferfile>.
=item B<--basenamereplace> I<replace-str>
=item B<--bnr> I<replace-str>
Use the replacement string I<replace-str> instead of B<{/}> for
basename of input line.
=item B<--basenameextensionreplace> I<replace-str>
=item B<--bner> I<replace-str>
Use the replacement string I<replace-str> instead of B<{/.}> for basename of input line without extension.
=item B<--bg>
Run command in background thus GNU B<parallel> will not wait for
completion of the command before exiting. This is the default if
B<--semaphore> is set.
See also: B<--fg>, B<man sem>.
Implies B<--semaphore>.
=item B<--bibtex>
=item B<--citation>
Print the citation notice and BibTeX entry for GNU B<parallel>,
silence citation notice for all future runs, and exit. It will not run
any commands.
If it is impossible for you to run B<--citation> you can instead use
B<--will-cite>, which will run commands, but which will only silence
the citation notice for this single run.
If you use B<--will-cite> in scripts to be run by others you are
making it harder for others to see the citation notice. The
development of GNU B<parallel> is indirectly financed through
citations, so if your users do not know they should cite then you are
making it harder to finance development. However, if you pay 10000
EUR, you have done your part to finance future development and should
feel free to use B<--will-cite> in scripts.
=item B<--block> I<size>
=item B<--block-size> I<size>
Size of block in bytes to read at a time. The I<size> can be postfixed
with K, M, G, T, P, E, k, m, g, t, p, or e which would multiply the
size with 1024, 1048576, 1073741824, 1099511627776, 1125899906842624,
1152921504606846976, 1000, 1000000, 1000000000, 1000000000000,
1000000000000000, or 1000000000000000000 respectively.
GNU B<parallel> tries to meet the block size but can be off by the
length of one record. For performance reasons I<size> should be bigger
than a two records. GNU B<parallel> will warn you and automatically
increase the size if you choose a I<size> that is too small.
If you use B<-N>, B<--block-size> should be bigger than N+1 records.
I<size> defaults to 1M.
When using B<--pipepart> a negative block size is not interpreted as a
blocksize but as the number of blocks each jobslot should have. So
this will run 10*5 = 50 jobs in total:
parallel --pipepart -a myfile --block -10 -j5 wc
This is an efficient alternative to B<--round-robin> because data is
never read by GNU B<parallel>, but you can still have very few
jobslots process a large amount of data.
See B<--pipe> and B<--pipepart> for use of this.
=item B<--cat>
Create a temporary file with content. Normally B<--pipe>/B<--pipepart>
will give data to the program on stdin (standard input). With B<--cat>
GNU B<parallel> will create a temporary file with the name in B<{}>, so
you can do: B<parallel --pipe --cat wc {}>.
Implies B<--pipe> unless B<--pipepart> is used.
See also B<--fifo>.
=item B<--cleanup>
Remove transferred files. B<--cleanup> will remove the transferred
files on the remote computer after processing is done.
find log -name '*gz' | parallel \
--sshlogin server.example.com --transferfile {} \
--return {.}.bz2 --cleanup "zcat {} | bzip -9 >{.}.bz2"
With B<--transferfile {}> the file transferred to the remote computer
will be removed on the remote computer. Directories created will not
be removed - even if they are empty.
With B<--return> the file transferred from the remote computer will be
removed on the remote computer. Directories created will not be
removed - even if they are empty.
B<--cleanup> is ignored when not used with B<--transferfile> or
B<--return>.
=item B<--colsep> I<regexp>
=item B<-C> I<regexp>
Column separator. The input will be treated as a table with I<regexp>
separating the columns. The n'th column can be accessed using
B<{>I<n>B<}> or B<{>I<n>.B<}>. E.g. B<{3}> is the 3rd column.
If there are more input sources, each input source will be separated,
but the columns from each input source will be linked (see B<--link>).
parallel --colsep '-' echo {4} {3} {2} {1} \
::: A-B C-D ::: e-f g-h
B<--colsep> implies B<--trim rl>, which can be overridden with
B<--trim n>.
I<regexp> is a Perl Regular Expression:
http://perldoc.perl.org/perlre.html
=item B<--compress>
Compress temporary files. If the output is big and very compressible
this will take up less disk space in $TMPDIR and possibly be faster
due to less disk I/O.
GNU B<parallel> will try B<pzstd>, B<lbzip2>, B<pbzip2>, B<zstd>,
B<pigz>, B<lz4>, B<lzop>, B<plzip>, B<lzip>, B<lrz>, B<gzip>, B<pxz>,
B<lzma>, B<bzip2>, B<xz>, B<clzip>, in that order, and use the first
available.
=item B<--compress-program> I<prg>
=item B<--decompress-program> I<prg>
Use I<prg> for (de)compressing temporary files. It is assumed that I<prg
-dc> will decompress stdin (standard input) to stdout (standard
output) unless B<--decompress-program> is given.
=item B<--csv>
Treat input as CSV-format. B<--colsep> sets the field delimiter. It
works very much like B<--colsep> except it deals correctly with
quoting:
echo '"1 big, 2 small","2""x4"" plank",12.34' |
parallel --csv echo {1} of {2} at {3}
Even quoted newlines are parsed correctly:
(echo '"Start of field 1 with newline'
echo 'Line 2 in field 1";value 2') |
parallel --csv --colsep ';' echo Field 1: {1} Field 2: {2}
When used with B<--pipe> only pass full CSV-records.
=item B<--delimiter> I<delim>
=item B<-d> I<delim>
Input items are terminated by I<delim>. Quotes and backslash are not
special; every character in the input is taken literally. Disables
the end-of-file string, which is treated like any other argument. The
specified delimiter may be characters, C-style character escapes such
as \n, or octal or hexadecimal escape codes. Octal and hexadecimal
escape codes are understood as for the printf command. Multibyte
characters are not supported.
=item B<--dirnamereplace> I<replace-str>
=item B<--dnr> I<replace-str>
Use the replacement string I<replace-str> instead of B<{//}> for
dirname of input line.
=item B<-E> I<eof-str>
Set the end of file string to I<eof-str>. If the end of file string
occurs as a line of input, the rest of the input is not read. If
neither B<-E> nor B<-e> is used, no end of file string is used.
=item B<--delay> I<mytime>
Delay starting next job by I<mytime>. GNU B<parallel> will pause
I<mytime> after starting each job. I<mytime> is normally in seconds,
but can be floats postfixed with B<s>, B<m>, B<h>, or B<d> which would
multiply the float by 1, 60, 3600, or 86400. Thus these are
equivalent: B<--delay 100000> and B<--delay 1d3.5h16.6m4s>.
=item B<--dry-run>
Print the job to run on stdout (standard output), but do not run the
job. Use B<-v -v> to include the wrapping that GNU Parallel generates
(for remote jobs, B<--tmux>, B<--nice>, B<--pipe>, B<--pipepart>,
B<--fifo> and B<--cat>). Do not count on this literaly, though, as the
job may be scheduled on another computer or the local computer if : is
in the list.
=item B<--eof>[=I<eof-str>]
=item B<-e>[I<eof-str>]
This option is a synonym for the B<-E> option. Use B<-E> instead,
because it is POSIX compliant for B<xargs> while this option is not.
If I<eof-str> is omitted, there is no end of file string. If neither
B<-E> nor B<-e> is used, no end of file string is used.
=item B<--embed>
Embed GNU B<parallel> in a shell script. If you need to distribute your
script to someone who does not want to install GNU B<parallel> you can
embed GNU B<parallel> in your own shell script:
parallel --embed > new_script
After which you add your code at the end of B<new_script>. This is tested
on B<ash>, B<bash>, B<dash>, B<ksh>, B<sh>, and B<zsh>.
=item B<--env> I<var>
Copy environment variable I<var>. This will copy I<var> to the
environment that the command is run in. This is especially useful for
remote execution.
In Bash I<var> can also be a Bash function - just remember to B<export
-f> the function, see B<command>.
The variable '_' is special. It will copy all exported environment
variables except for the ones mentioned in ~/.parallel/ignored_vars.
To copy the full environment (both exported and not exported
variables, arrays, and functions) use B<env_parallel>.
See also: B<--record-env>, B<--session>.
=item B<--eta>
Show the estimated number of seconds before finishing. This forces GNU
B<parallel> to read all jobs before starting to find the number of
jobs. GNU B<parallel> normally only reads the next job to run.
The estimate is based on the runtime of finished jobs, so the first
estimate will only be shown when the first job has finished.
Implies B<--progress>.
See also: B<--bar>, B<--progress>.
=item B<--fg>
Run command in foreground.
With B<--tmux> and B<--tmuxpane> GNU B<parallel> will start B<tmux> in
the foreground.
With B<--semaphore> GNU B<parallel> will run the command in the
foreground (opposite B<--bg>), and wait for completion of the command
before exiting.
See also B<--bg>, B<man sem>.
=item B<--fifo>
Create a temporary fifo with content. Normally B<--pipe> and
B<--pipepart> will give data to the program on stdin (standard
input). With B<--fifo> GNU B<parallel> will create a temporary fifo
with the name in B<{}>, so you can do: B<parallel --pipe --fifo wc {}>.
Beware: If data is not read from the fifo, the job will block forever.
Implies B<--pipe> unless B<--pipepart> is used.
See also B<--cat>.
=item B<--filter-hosts>
Remove down hosts. For each remote host: check that login through ssh
works. If not: do not use this host.
For performance reasons, this check is performed only at the start and
every time B<--sshloginfile> is changed. If an host goes down after
the first check, it will go undetected until B<--sshloginfile> is
changed; B<--retries> can be used to mitigate this.
Currently you can I<not> put B<--filter-hosts> in a profile,
$PARALLEL, /etc/parallel/config or similar. This is because GNU
B<parallel> uses GNU B<parallel> to compute this, so you will get an
infinite loop. This will likely be fixed in a later release.
=item B<--gnu>
Behave like GNU B<parallel>. This option historically took precedence
over B<--tollef>. The B<--tollef> option is now retired, and therefore
may not be used. B<--gnu> is kept for compatibility.
=item B<--group>
Group output. Output from each job is grouped together and is only
printed when the command is finished. stdout (standard output) first
followed by stderr (standard error).
This takes in the order of 0.5ms per job and depends on the speed of
your disk for larger output. It can be disabled with B<-u>, but this
means output from different commands can get mixed.
B<--group> is the default. Can be reversed with B<-u>.
See also: B<--line-buffer> B<--ungroup>
=item B<--help>
=item B<-h>
Print a summary of the options to GNU B<parallel> and exit.
=item B<--halt-on-error> I<val>
=item B<--halt> I<val>
When should GNU B<parallel> terminate? In some situations it makes no
sense to run all jobs. GNU B<parallel> should simply give up as soon
as a condition is met.
I<val> defaults to B<never>, which runs all jobs no matter what.
I<val> can also take on the form of I<when>,I<why>.
I<when> can be 'now' which means kill all running jobs and halt
immediately, or it can be 'soon' which means wait for all running jobs
to complete, but start no new jobs.
I<why> can be 'fail=X', 'fail=Y%', 'success=X', 'success=Y%',
'done=X', or 'done=Y%' where X is the number of jobs that has to fail,
succeed, or be done before halting, and Y is the percentage of jobs
that has to fail, succeed, or be done before halting.
Example:
=over 23
=item Z<> --halt now,fail=1
exit when the first job fails. Kill running jobs.
=item Z<> --halt soon,fail=3
exit when 3 jobs fail, but wait for running jobs to complete.
=item Z<> --halt soon,fail=3%
exit when 3% of the jobs have failed, but wait for running jobs to complete.
=item Z<> --halt now,success=1
exit when a job succeeds. Kill running jobs.
=item Z<> --halt soon,success=3
exit when 3 jobs succeeds, but wait for running jobs to complete.
=item Z<> --halt now,success=3%
exit when 3% of the jobs have succeeded. Kill running jobs.
=item Z<> --halt now,done=1
exit when one of the jobs finishes. Kill running jobs.
=item Z<> --halt soon,done=3
exit when 3 jobs finishes, but wait for running jobs to complete.
=item Z<> --halt now,done=3%
exit when 3% of the jobs have finished. Kill running jobs.
=back
For backwards compability these also work:
=over 12
=item Z<>0
never
=item Z<>1
soon,fail=1
=item Z<>2
now,fail=1
=item Z<>-1
soon,success=1
=item Z<>-2
now,success=1
=item Z<>1-99%
soon,fail=1-99%
=back
=item B<--header> I<regexp>
Use regexp as header. For normal usage the matched header (typically
the first line: B<--header '.*\n'>) will be split using B<--colsep>
(which will default to '\t') and column names can be used as
replacement variables: B<{column name}>, B<{column name/}>, B<{column
name//}>, B<{column name/.}>, B<{column name.}>, B<{=column name perl
expression =}>, ..
For B<--pipe> the matched header will be prepended to each output.
B<--header :> is an alias for B<--header '.*\n'>.
If I<regexp> is a number, it is a fixed number of lines.
=item B<--hostgroups>
=item B<--hgrp>
Enable hostgroups on arguments. If an argument contains '@' the string
after '@' will be removed and treated as a list of hostgroups on which
this job is allowed to run. If there is no B<--sshlogin> with a
corresponding group, the job will run on any hostgroup.
Example:
parallel --hostgroups \
--sshlogin @grp1/myserver1 -S @grp1+grp2/myserver2 \
--sshlogin @grp3/myserver3 \
echo ::: my_grp1_arg@grp1 arg_for_grp2@grp2 third@grp1+grp3
B<my_grp1_arg> may be run on either B<myserver1> or B<myserver2>,
B<third> may be run on either B<myserver1> or B<myserver3>,
but B<arg_for_grp2> will only be run on B<myserver2>.
See also: B<--sshlogin>.
=item B<-I> I<replace-str>
Use the replacement string I<replace-str> instead of B<{}>.
=item B<--replace>[=I<replace-str>]
=item B<-i>[I<replace-str>]
This option is a synonym for B<-I>I<replace-str> if I<replace-str> is
specified, and for B<-I {}> otherwise. This option is deprecated;
use B<-I> instead.
=item B<--joblog> I<logfile>
Logfile for executed jobs. Save a list of the executed jobs to
I<logfile> in the following TAB separated format: sequence number,
sshlogin, start time as seconds since epoch, run time in seconds,
bytes in files transferred, bytes in files returned, exit status,
signal, and command run.
For B<--pipe> bytes transferred and bytes returned are number of input
and output of bytes.
If B<logfile> is prepended with '+' log lines will be appended to the
logfile.
To convert the times into ISO-8601 strict do:
cat logfile | perl -a -F"\t" -ne \
'chomp($F[2]=`date -d \@$F[2] +%FT%T`); print join("\t",@F)'
If the host is long, you can use B<column -t> to pretty print it:
cat joblog | column -t
See also B<--resume> B<--resume-failed>.
=item B<--jobs> I<N>
=item B<-j> I<N>
=item B<--max-procs> I<N>
=item B<-P> I<N>
Number of jobslots on each machine. Run up to N jobs in parallel. 0
means as many as possible. Default is 100% which will run one job per
CPU core on each machine.
If B<--semaphore> is set, the default is 1 thus making a mutex.
=item B<--jobs> I<+N>
=item B<-j> I<+N>
=item B<--max-procs> I<+N>
=item B<-P> I<+N>
Add N to the number of CPU cores. Run this many jobs in parallel.
See also B<--use-cpus-instead-of-cores>.
=item B<--jobs> I<-N>
=item B<-j> I<-N>
=item B<--max-procs> I<-N>
=item B<-P> I<-N>
Subtract N from the number of CPU cores. Run this many jobs in parallel.
If the evaluated number is less than 1 then 1 will be used. See also
B<--use-cpus-instead-of-cores>.
=item B<--jobs> I<N>%
=item B<-j> I<N>%
=item B<--max-procs> I<N>%
=item B<-P> I<N>%
Multiply N% with the number of CPU cores. Run this many jobs in
parallel. See also B<--use-cpus-instead-of-cores>.
=item B<--jobs> I<procfile>
=item B<-j> I<procfile>
=item B<--max-procs> I<procfile>
=item B<-P> I<procfile>
Read parameter from file. Use the content of I<procfile> as parameter
for I<-j>. E.g. I<procfile> could contain the string 100% or +2 or
10. If I<procfile> is changed when a job completes, I<procfile> is
read again and the new number of jobs is computed. If the number is
lower than before, running jobs will be allowed to finish but new jobs
will not be started until the wanted number of jobs has been reached.
This makes it possible to change the number of simultaneous running
jobs while GNU B<parallel> is running.
=item B<--keep-order>
=item B<-k>
Keep sequence of output same as the order of input. Normally the
output of a job will be printed as soon as the job completes. Try this
to see the difference:
parallel -j4 sleep {}\; echo {} ::: 2 1 4 3
parallel -j4 -k sleep {}\; echo {} ::: 2 1 4 3
If used with B<--onall> or B<--nonall> the output will grouped by
sshlogin in sorted order.
If used with B<--pipe --roundrobin> and the same input, the jobslots
will get the same blocks in the same order in every run.
=item B<-L> I<max-lines>
When used with B<--pipe>: Read records of I<max-lines>.
When used otherwise: Use at most I<max-lines> nonblank input lines per
command line. Trailing blanks cause an input line to be logically
continued on the next input line.
B<-L 0> means read one line, but insert 0 arguments on the command
line.
Implies B<-X> unless B<-m>, B<--xargs>, or B<--pipe> is set.
=item B<--max-lines>[=I<max-lines>]
=item B<-l>[I<max-lines>]
When used with B<--pipe>: Read records of I<max-lines>.
When used otherwise: Synonym for the B<-L> option. Unlike B<-L>, the
I<max-lines> argument is optional. If I<max-lines> is not specified,
it defaults to one. The B<-l> option is deprecated since the POSIX
standard specifies B<-L> instead.
B<-l 0> is an alias for B<-l 1>.
Implies B<-X> unless B<-m>, B<--xargs>, or B<--pipe> is set.
=item B<--limit> "I<command> I<args>"
Dynamic job limit. Before starting a new job run I<command> with
I<args>. The exit value of I<command> determines what GNU B<parallel>
will do:
=over 4
=item Z<>0
Below limit. Start another job.
=item Z<>1
Over limit. Start no jobs.
=item Z<>2
Way over limit. Kill the youngest job.
=back
You can use any shell command. There are 3 predefined commands:
=over 10
=item "io I<n>"
Limit for I/O. The amount of disk I/O will be computed as a value
0-100, where 0 is no I/O and 100 is at least one disk is 100%
saturated.
=item "load I<n>"
Similar to B<--load>.
=item "mem I<n>"
Similar to B<--memfree>.
=back
=item B<--line-buffer>
=item B<--lb>
Buffer output on line basis. B<--group> will keep the output together
for a whole job. B<--ungroup> allows output to mixup with half a line
coming from one job and half a line coming from another
job. B<--line-buffer> fits between these two: GNU B<parallel> will
print a full line, but will allow for mixing lines of different jobs.
B<--line-buffer> takes more CPU power than both B<--group> and
B<--ungroup>, but can be much faster than B<--group> if the CPU is not
the limiting factor.
Normally B<--line-buffer> does not buffer on disk, and can thus
process an infinite amount of data, but it will buffer on disk when
combined with: B<--keep-order>, B<--results>, B<--compress>, and
B<--files>. This will make it as slow as B<--group> and will limit
output to the available disk space.
With B<--keep-order> B<--line-buffer> will output lines from the first
job while it is running, then lines from the second job while that is
running. It will buffer full lines, but jobs will not mix. Compare:
parallel -j0 'echo {};sleep {};echo {}' ::: 1 3 2 4
parallel -j0 --lb 'echo {};sleep {};echo {}' ::: 1 3 2 4
parallel -j0 -k --lb 'echo {};sleep {};echo {}' ::: 1 3 2 4
See also: B<--group> B<--ungroup>
=item B<--xapply>
=item B<--link>
Link input sources. Read multiple input sources like B<xapply>. If
multiple input sources are given, one argument will be read from each
of the input sources. The arguments can be accessed in the command as
B<{1}> .. B<{>I<n>B<}>, so B<{1}> will be a line from the first input
source, and B<{6}> will refer to the line with the same line number
from the 6th input source.
Compare these two:
parallel echo {1} {2} ::: 1 2 3 ::: a b c
parallel --link echo {1} {2} ::: 1 2 3 ::: a b c
Arguments will be recycled if one input source has more arguments than the others:
parallel --link echo {1} {2} {3} \
::: 1 2 ::: I II III ::: a b c d e f g
See also B<--header>, B<:::+>, B<::::+>.
=item B<--load> I<max-load>
Do not start new jobs on a given computer unless the number of running
processes on the computer is less than I<max-load>. I<max-load> uses
the same syntax as B<--jobs>, so I<100%> for one per CPU is a valid
setting. Only difference is 0 which is interpreted as 0.01.
=item B<--controlmaster>
=item B<-M>
Use ssh's ControlMaster to make ssh connections faster. Useful if jobs
run remote and are very fast to run. This is disabled for sshlogins
that specify their own ssh command.
=item B<--xargs>
Multiple arguments. Insert as many arguments as the command line
length permits.
If B<{}> is not used the arguments will be appended to the
line. If B<{}> is used multiple times each B<{}> will be replaced
with all the arguments.
Support for B<--xargs> with B<--sshlogin> is limited and may fail.
See also B<-X> for context replace. If in doubt use B<-X> as that will
most likely do what is needed.
=item B<-m>
Multiple arguments. Insert as many arguments as the command line
length permits. If multiple jobs are being run in parallel: distribute
the arguments evenly among the jobs. Use B<-j1> or B<--xargs> to avoid this.
If B<{}> is not used the arguments will be appended to the
line. If B<{}> is used multiple times each B<{}> will be replaced
with all the arguments.
Support for B<-m> with B<--sshlogin> is limited and may fail.
See also B<-X> for context replace. If in doubt use B<-X> as that will
most likely do what is needed.
=item B<--memfree> I<size>
Minimum memory free when starting another job. The I<size> can be
postfixed with K, M, G, T, P, k, m, g, t, or p which would multiply
the size with 1024, 1048576, 1073741824, 1099511627776,
1125899906842624, 1000, 1000000, 1000000000, 1000000000000, or
1000000000000000, respectively.
If the jobs take up very different amount of RAM, GNU B<parallel> will
only start as many as there is memory for. If less than I<size> bytes
are free, no more jobs will be started. If less than 50% I<size> bytes
are free, the youngest job will be killed, and put back on the queue
to be run later.
B<--retries> must be set to determine how many times GNU B<parallel>
should retry a given job.
=item B<--minversion> I<version>
Print the version GNU B<parallel> and exit. If the current version of
GNU B<parallel> is less than I<version> the exit code is
255. Otherwise it is 0.
This is useful for scripts that depend on features only available from
a certain version of GNU B<parallel>.
=item B<--nonall>
B<--onall> with no arguments. Run the command on all computers given
with B<--sshlogin> but take no arguments. GNU B<parallel> will log
into B<--jobs> number of computers in parallel and run the job on the
computer. B<-j> adjusts how many computers to log into in parallel.
This is useful for running the same command (e.g. uptime) on a list of
servers.
=item B<--onall>
Run all the jobs on all computers given with B<--sshlogin>. GNU
B<parallel> will log into B<--jobs> number of computers in parallel
and run one job at a time on the computer. The order of the jobs will
not be changed, but some computers may finish before others.
When using B<--group> the output will be grouped by each server, so
all the output from one server will be grouped together.
B<--joblog> will contain an entry for each job on each server, so
there will be several job sequence 1.
=item B<--output-as-files>
=item B<--outputasfiles>
=item B<--files>
Instead of printing the output to stdout (standard output) the output
of each job is saved in a file and the filename is then printed.
See also: B<--results>
=item B<--pipe>
=item B<--spreadstdin>
Spread input to jobs on stdin (standard input). Read a block of data
from stdin (standard input) and give one block of data as input to one
job.
The block size is determined by B<--block>. The strings B<--recstart>
and B<--recend> tell GNU B<parallel> how a record starts and/or
ends. The block read will have the final partial record removed before
the block is passed on to the job. The partial record will be
prepended to next block.
If B<--recstart> is given this will be used to split at record start.
If B<--recend> is given this will be used to split at record end.
If both B<--recstart> and B<--recend> are given both will have to
match to find a split position.
If neither B<--recstart> nor B<--recend> are given B<--recend>
defaults to '\n'. To have no record separator use B<--recend "">.
B<--files> is often used with B<--pipe>.
B<--pipe> maxes out at around 1 GB/s input, and 100 MB/s output. If
performance is important use B<--pipepart>.
See also: B<--recstart>, B<--recend>, B<--fifo>, B<--cat>,
B<--pipepart>, B<--files>.
=item B<--pipepart>
Pipe parts of a physical file. B<--pipepart> works similar to
B<--pipe>, but is much faster.
B<--pipepart> has a few limitations:
=over 3
=item *
The file must be a normal file or a block device (technically it must
be seekable) and must be given using B<-a> or B<::::>. The file cannot
be a pipe or a fifo as they are not seekable.
If using a block device with lot of NUL bytes, remember to set
B<--recend ''>.
=item *
Record counting (B<-N>) and line counting (B<-L>/B<-l>) do not work.
=back
=item B<--plain>
Ignore any B<--profile>, $PARALLEL, and ~/.parallel/config to get full
control on the command line (used by GNU B<parallel> internally when
called with B<--sshlogin>).
=item B<--plus>
Activate additional replacement strings: {+/} {+.} {+..} {+...} {..}
{...} {/..} {/...} {##}. The idea being that '{+foo}' matches the opposite of
'{foo}' and {} = {+/}/{/} = {.}.{+.} = {+/}/{/.}.{+.} = {..}.{+..} =
{+/}/{/..}.{+..} = {...}.{+...} = {+/}/{/...}.{+...}
B<{##}> is the number of jobs to be run. It is incompatible with
B<-X>/B<-m>/B<--xargs>.
B<{choose_k}> is inspired by n choose k: Given a list of n elements,
choose k. k is the number of input sources and n is the number of
arguments in an input source. The content of the input sources must
be the same and the arguments must be unique.
The following dynamic replacement strings are also activated. They are
inspired by bash's parameter expansion:
{:-str} str if the value is empty
{:num} remove the first num characters
{:num1:num2} characters from num1 to num2
{#str} remove prefix str
{%str} remove postfix str
{/str1/str2} replace str1 with str2
{^str} uppercase str if found at the start
{^^str} uppercase str
{,str} lowercase str if found at the start
{,,str} lowercase str
=item B<--progress>
Show progress of computations. List the computers involved in the task
with number of CPU cores detected and the max number of jobs to
run. After that show progress for each computer: number of running
jobs, number of completed jobs, and percentage of all jobs done by
this computer. The percentage will only be available after all jobs
have been scheduled as GNU B<parallel> only read the next job when
ready to schedule it - this is to avoid wasting time and memory by
reading everything at startup.
By sending GNU B<parallel> SIGUSR2 you can toggle turning on/off
B<--progress> on a running GNU B<parallel> process.
See also B<--eta> and B<--bar>.
=item B<--max-args>=I<max-args>
=item B<-n> I<max-args>
Use at most I<max-args> arguments per command line. Fewer than
I<max-args> arguments will be used if the size (see the B<-s> option)
is exceeded, unless the B<-x> option is given, in which case
GNU B<parallel> will exit.
B<-n 0> means read one argument, but insert 0 arguments on the command
line.
Implies B<-X> unless B<-m> is set.
=item B<--max-replace-args>=I<max-args>
=item B<-N> I<max-args>
Use at most I<max-args> arguments per command line. Like B<-n> but
also makes replacement strings B<{1}> .. B<{>I<max-args>B<}> that
represents argument 1 .. I<max-args>. If too few args the B<{>I<n>B<}> will
be empty.
B<-N 0> means read one argument, but insert 0 arguments on the command
line.
This will set the owner of the homedir to the user:
tr ':' '\n' < /etc/passwd | parallel -N7 chown {1} {6}
Implies B<-X> unless B<-m> or B<--pipe> is set.
When used with B<--pipe> B<-N> is the number of records to read. This
is somewhat slower than B<--block>.
=item B<--max-line-length-allowed>
Print the maximal number of characters allowed on the command line and
exit (used by GNU B<parallel> itself to determine the line length
on remote computers).
=item B<--number-of-cpus>
Print the number of physical CPUs and exit (used by GNU B<parallel>
itself to determine the number of physical CPUs on remote computers).
=item B<--number-of-cores>
Print the number of CPU cores and exit (used by GNU B<parallel> itself
to determine the number of CPU cores on remote computers).
=item B<--no-keep-order>
Overrides an earlier B<--keep-order> (e.g. if set in
B<~/.parallel/config>).
=item B<--nice> I<niceness>
Run the command at this niceness. For simple commands you can just add
B<nice> in front of the command. But if the command consists of more
sub commands (Like: ls|wc) then prepending B<nice> will not always
work. B<--nice> will make sure all sub commands are niced - even on
remote servers.
=item B<--interactive>
=item B<-p>
Prompt the user about whether to run each command line and read a line
from the terminal. Only run the command line if the response starts
with 'y' or 'Y'. Implies B<-t>.
=item B<--parens> I<parensstring>
Define start and end parenthesis for B<{= perl expression =}>. The
left and the right parenthesis can be multiple characters and are
assumed to be the same length. The default is B<{==}> giving B<{=> as
the start parenthesis and B<=}> as the end parenthesis.
Another useful setting is B<,,,,> which would make both parenthesis
B<,,>:
parallel --parens ,,,, echo foo is ,,s/I/O/g,, ::: FII
See also: B<--rpl> B<{= perl expression =}>
=item B<--profile> I<profilename>
=item B<-J> I<profilename>
Use profile I<profilename> for options. This is useful if you want to
have multiple profiles. You could have one profile for running jobs in
parallel on the local computer and a different profile for running jobs
on remote computers. See the section PROFILE FILES for examples.
I<profilename> corresponds to the file ~/.parallel/I<profilename>.
You can give multiple profiles by repeating B<--profile>. If parts of
the profiles conflict, the later ones will be used.
Default: config
=item B<--quote>
=item B<-q>
Quote I<command>. The command must be a simple command (see B<man
bash>) without redirections and without variable assignments. This
will quote the command line and arguments so special characters are
not interpreted by the shell. See the section QUOTING. Most people
will never need this. Quoting is disabled by default.
=item B<--no-run-if-empty>
=item B<-r>
If the stdin (standard input) only contains whitespace, do not run the command.
If used with B<--pipe> this is slow.
=item B<--noswap>
Do not start new jobs on a given computer if there is both swap-in and
swap-out activity.
The swap activity is only sampled every 10 seconds as the sampling
takes 1 second to do.
Swap activity is computed as (swap-in)*(swap-out) which in practice is
a good value: swapping out is not a problem, swapping in is not a
problem, but both swapping in and out usually indicates a problem.
B<--memfree> may give better results, so try using that first.
=item B<--record-env>
Record current environment variables in ~/.parallel/ignored_vars. This
is useful before using B<--env _>.
See also B<--env>, B<--session>.
=item B<--recstart> I<startstring>
=item B<--recend> I<endstring>
If B<--recstart> is given I<startstring> will be used to split at record start.
If B<--recend> is given I<endstring> will be used to split at record end.
If both B<--recstart> and B<--recend> are given the combined string
I<endstring>I<startstring> will have to match to find a split
position. This is useful if either I<startstring> or I<endstring>
match in the middle of a record.
If neither B<--recstart> nor B<--recend> are given then B<--recend>
defaults to '\n'. To have no record separator use B<--recend "">.
B<--recstart> and B<--recend> are used with B<--pipe>.
Use B<--regexp> to interpret B<--recstart> and B<--recend> as regular
expressions. This is slow, however.
=item B<--regexp>
Use B<--regexp> to interpret B<--recstart> and B<--recend> as regular
expressions. This is slow, however.
=item B<--remove-rec-sep>
=item B<--removerecsep>
=item B<--rrs>
Remove the text matched by B<--recstart> and B<--recend> before piping
it to the command.
Only used with B<--pipe>.
=item B<--results> I<name> (beta testing)
=item B<--res> I<name> (beta testing)
Save the output into files.
B<Simple string output dir>
If I<name> does not contain replacement strings and does not end in
B<.csv/.tsv>, the output will be stored in a directory tree rooted at
I<name>. Within this directory tree, each command will result in
three files: I<name>/<ARGS>/stdout and I<name>/<ARGS>/stderr,
I<name>/<ARGS>/seq, where <ARGS> is a sequence of directories
representing the header of the input source (if using B<--header :>)
or the number of the input source and corresponding values.
E.g:
parallel --header : --results foo echo {a} {b} \
::: a I II ::: b III IIII
will generate the files:
foo/a/II/b/III/seq
foo/a/II/b/III/stderr
foo/a/II/b/III/stdout
foo/a/II/b/IIII/seq
foo/a/II/b/IIII/stderr
foo/a/II/b/IIII/stdout
foo/a/I/b/III/seq
foo/a/I/b/III/stderr
foo/a/I/b/III/stdout
foo/a/I/b/IIII/seq
foo/a/I/b/IIII/stderr
foo/a/I/b/IIII/stdout
and
parallel --results foo echo {1} {2} ::: I II ::: III IIII
will generate the files:
foo/1/II/2/III/seq
foo/1/II/2/III/stderr
foo/1/II/2/III/stdout
foo/1/II/2/IIII/seq
foo/1/II/2/IIII/stderr
foo/1/II/2/IIII/stdout
foo/1/I/2/III/seq
foo/1/I/2/III/stderr
foo/1/I/2/III/stdout
foo/1/I/2/IIII/seq
foo/1/I/2/IIII/stderr
foo/1/I/2/IIII/stdout
B<CSV file output>
If I<name> ends in B<.csv>/B<.tsv> the output will be a CSV-file
named I<name>.
B<.csv> gives a comma separated value file. B<.tsv> gives a TAB
separated value file.
B<-.csv>/B<-.tsv> are special: It will give the file on stdout
(standard output).
B<Replacement string output file>
If I<name> contains a replacement string and the replaced result does
not end in /, then the standard output will be stored in a file named
by this result. Standard error will be stored in the same file name
with '.err' added, and the sequence number will be stored in the same
file name with '.seq' added.
E.g.
parallel --results my_{} echo ::: foo bar baz
will generate the files:
my_bar
my_bar.err
my_bar.seq
my_baz
my_baz.err
my_baz.seq
my_foo
my_foo.err
my_foo.seq
B<Replacement string output dir>
If I<name> contains a replacement string and the replaced result ends
in /, then output files will be stored in the resulting dir.
E.g.
parallel --results my_{}/ echo ::: foo bar baz
will generate the files:
my_bar/seq
my_bar/stderr
my_bar/stdout
my_baz/seq
my_baz/stderr
my_baz/stdout
my_foo/seq
my_foo/stderr
my_foo/stdout
See also B<--files>, B<--tag>, B<--header>, B<--joblog>.
=item B<--resume>
Resumes from the last unfinished job. By reading B<--joblog> or the
B<--results> dir GNU B<parallel> will figure out the last unfinished
job and continue from there. As GNU B<parallel> only looks at the
sequence numbers in B<--joblog> then the input, the command, and
B<--joblog> all have to remain unchanged; otherwise GNU B<parallel>
may run wrong commands.
See also B<--joblog>, B<--results>, B<--resume-failed>, B<--retries>.
=item B<--resume-failed>
Retry all failed and resume from the last unfinished job. By reading
B<--joblog> GNU B<parallel> will figure out the failed jobs and run
those again. After that it will resume last unfinished job and
continue from there. As GNU B<parallel> only looks at the sequence
numbers in B<--joblog> then the input, the command, and B<--joblog>
all have to remain unchanged; otherwise GNU B<parallel> may run wrong
commands.
See also B<--joblog>, B<--resume>, B<--retry-failed>, B<--retries>.
=item B<--retry-failed>
Retry all failed jobs in joblog. By reading B<--joblog> GNU
B<parallel> will figure out the failed jobs and run those again.
B<--retry-failed> ignores the command and arguments on the command
line: It only looks at the joblog.
B<Differences between --resume, --resume-failed, --retry-failed>
In this example B<exit {= $_%=2 =}> will cause every other job to fail.
timeout -k 1 4 parallel --joblog log -j10 \
'sleep {}; exit {= $_%=2 =}' ::: {10..1}
4 jobs completed. 2 failed:
Seq [...] Exitval Signal Command
10 [...] 1 0 sleep 1; exit 1
9 [...] 0 0 sleep 2; exit 0
8 [...] 1 0 sleep 3; exit 1
7 [...] 0 0 sleep 4; exit 0
B<--resume> does not care about the Exitval, but only looks at Seq. If
the Seq is run, it will not be run again. So if needed, you can change
the command for the seqs not run yet:
parallel --resume --joblog log -j10 \
'sleep .{}; exit {= $_%=2 =}' ::: {10..1}
Seq [...] Exitval Signal Command
[... as above ...]
1 [...] 0 0 sleep .10; exit 0
6 [...] 1 0 sleep .5; exit 1
5 [...] 0 0 sleep .6; exit 0
4 [...] 1 0 sleep .7; exit 1
3 [...] 0 0 sleep .8; exit 0
2 [...] 1 0 sleep .9; exit 1
B<--resume-failed> cares about the Exitval, but also only looks at Seq
to figure out which commands to run. Again this means you can change
the command, but not the arguments. It will run the failed seqs and
the seqs not yet run:
parallel --resume-failed --joblog log -j10 \
'echo {};sleep .{}; exit {= $_%=3 =}' ::: {10..1}
Seq [...] Exitval Signal Command
[... as above ...]
10 [...] 1 0 echo 1;sleep .1; exit 1
8 [...] 0 0 echo 3;sleep .3; exit 0
6 [...] 2 0 echo 5;sleep .5; exit 2
4 [...] 1 0 echo 7;sleep .7; exit 1
2 [...] 0 0 echo 9;sleep .9; exit 0
B<--retry-failed> cares about the Exitval, but takes the command from
the joblog. It ignores any arguments or commands given on the command
line:
parallel --retry-failed --joblog log -j10 this part is ignored
Seq [...] Exitval Signal Command
[... as above ...]
10 [...] 1 0 echo 1;sleep .1; exit 1
6 [...] 2 0 echo 5;sleep .5; exit 2
4 [...] 1 0 echo 7;sleep .7; exit 1
See also B<--joblog>, B<--resume>, B<--resume-failed>, B<--retries>.
=item B<--retries> I<n>
If a job fails, retry it on another computer on which it has not
failed. Do this I<n> times. If there are fewer than I<n> computers in
B<--sshlogin> GNU B<parallel> will re-use all the computers. This is
useful if some jobs fail for no apparent reason (such as network
failure).
=item B<--return> I<filename>
Transfer files from remote computers. B<--return> is used with
B<--sshlogin> when the arguments are files on the remote computers. When
processing is done the file I<filename> will be transferred
from the remote computer using B<rsync> and will be put relative to
the default login dir. E.g.
echo foo/bar.txt | parallel --return {.}.out \
--sshlogin server.example.com touch {.}.out
This will transfer the file I<$HOME/foo/bar.out> from the computer
I<server.example.com> to the file I<foo/bar.out> after running
B<touch foo/bar.out> on I<server.example.com>.
parallel -S server --trc out/./{}.out touch {}.out ::: in/file
This will transfer the file I<in/file.out> from the computer
I<server.example.com> to the files I<out/in/file.out> after running
B<touch in/file.out> on I<server>.
echo /tmp/foo/bar.txt | parallel --return {.}.out \
--sshlogin server.example.com touch {.}.out
This will transfer the file I</tmp/foo/bar.out> from the computer
I<server.example.com> to the file I</tmp/foo/bar.out> after running
B<touch /tmp/foo/bar.out> on I<server.example.com>.
Multiple files can be transferred by repeating the option multiple
times:
echo /tmp/foo/bar.txt | parallel \
--sshlogin server.example.com \
--return {.}.out --return {.}.out2 touch {.}.out {.}.out2
B<--return> is often used with B<--transferfile> and B<--cleanup>.
B<--return> is ignored when used with B<--sshlogin :> or when not used
with B<--sshlogin>.
=item B<--round-robin>
=item B<--round>
Normally B<--pipe> will give a single block to each instance of the
command. With B<--round-robin> all blocks will at random be written to
commands already running. This is useful if the command takes a long
time to initialize.
B<--keep-order> will not work with B<--round-robin> as it is
impossible to track which input block corresponds to which output.
B<--round-robin> implies B<--pipe>, except if B<--pipepart> is given.
=item B<--rpl> 'I<tag> I<perl expression>'
Use I<tag> as a replacement string for I<perl expression>. This makes
it possible to define your own replacement strings. GNU B<parallel>'s
7 replacement strings are implemented as:
--rpl '{} '
--rpl '{#} 1 $_=$job->seq()'
--rpl '{%} 1 $_=$job->slot()'
--rpl '{/} s:.*/::'
--rpl '{//} $Global::use{"File::Basename"} ||=
eval "use File::Basename; 1;"; $_ = dirname($_);'
--rpl '{/.} s:.*/::; s:\.[^/.]+$::;'
--rpl '{.} s:\.[^/.]+$::'
The B<--plus> replacement strings are implemented as:
--rpl '{+/} s:/[^/]*$::'
--rpl '{+.} s:.*\.::'
--rpl '{+..} s:.*\.([^.]*\.):$1:'
--rpl '{+...} s:.*\.([^.]*\.[^.]*\.):$1:'
--rpl '{..} s:\.[^/.]+$::; s:\.[^/.]+$::'
--rpl '{...} s:\.[^/.]+$::; s:\.[^/.]+$::; s:\.[^/.]+$::'
--rpl '{/..} s:.*/::; s:\.[^/.]+$::; s:\.[^/.]+$::'
--rpl '{/...} s:.*/::;s:\.[^/.]+$::;s:\.[^/.]+$::;s:\.[^/.]+$::'
--rpl '{##} $_=total_jobs()'
--rpl '{:-(.+?)} $_ ||= $$1'
--rpl '{:(\d+?)} substr($_,0,$$1) = ""'
--rpl '{:(\d+?):(\d+?)} $_ = substr($_,$$1,$$2);'
--rpl '{#([^#].*?)} s/^$$1//;'
--rpl '{%(.+?)} s/$$1$//;'
--rpl '{/(.+?)/(.*?)} s/$$1/$$2/;'
--rpl '{^(.+?)} s/^($$1)/uc($1)/e;'
--rpl '{^^(.+?)} s/($$1)/uc($1)/eg;'
--rpl '{,(.+?)} s/^($$1)/lc($1)/e;'
--rpl '{,,(.+?)} s/($$1)/lc($1)/eg;'
If the user defined replacement string starts with '{' it can also be
used as a positional replacement string (like B<{2.}>).
It is recommended to only change $_ but you have full access to all
of GNU B<parallel>'s internal functions and data structures.
Here are a few examples:
Is the job sequence even or odd?
--rpl '{odd} $_ = seq() % 2 ? "odd" : "even"'
Pad job sequence with leading zeros to get equal width
--rpl '{0#} $f=1+int("".(log(total_jobs())/log(10)));
$_=sprintf("%0${f}d",seq())'
Job sequence counting from 0
--rpl '{#0} $_ = seq() - 1'
Job slot counting from 2
--rpl '{%1} $_ = slot() + 1'
Remove all extensions
--rpl '{:} s:(\.[^/]+)*$::'
You can have dynamic replacement strings by including parenthesis in
the replacement string and adding a regular expression between the
parenthesis. The matching string will be inserted as $$1:
parallel --rpl '{%(.*?)} s/$$1//' echo {%.tar.gz} ::: my.tar.gz
parallel --rpl '{:%(.+?)} s:$$1(\.[^/]+)*$::' \
echo {:%_file} ::: my_file.tar.gz
parallel -n3 --rpl '{/:%(.*?)} s:.*/(.*)$$1(\.[^/]+)*$:$1:' \
echo job {#}: {2} {2.} {3/:%_1} ::: a/b.c c/d.e f/g_1.h.i
You can even use multiple matches:
parallel --rpl '{/(.+?)/(.*?)} s/$$1/$$2/;'
echo {/replacethis/withthis} {/b/C} ::: a_replacethis_b
parallel --rpl '{(.*?)/(.*?)} $_="$$2$_$$1"' \
echo {swap/these} ::: -middle-
See also: B<{= perl expression =}> B<--parens>
=item B<--rsync-opts> I<options>
Options to pass on to B<rsync>. Setting B<--rsync-opts> takes
precedence over setting the environment variable $PARALLEL_RSYNC_OPTS.
=item B<--max-chars>=I<max-chars>
=item B<-s> I<max-chars>
Use at most I<max-chars> characters per command line, including the
command and initial-arguments and the terminating nulls at the ends of
the argument strings. The largest allowed value is system-dependent,
and is calculated as the argument length limit for exec, less the size
of your environment. The default value is the maximum.
Implies B<-X> unless B<-m> is set.
=item B<--show-limits>
Display the limits on the command-line length which are imposed by the
operating system and the B<-s> option. Pipe the input from /dev/null
(and perhaps specify --no-run-if-empty) if you don't want GNU B<parallel>
to do anything.
=item B<--semaphore>
Work as a counting semaphore. B<--semaphore> will cause GNU
B<parallel> to start I<command> in the background. When the number of
jobs given by B<--jobs> is reached, GNU B<parallel> will wait for one of
these to complete before starting another command.
B<--semaphore> implies B<--bg> unless B<--fg> is specified.
B<--semaphore> implies B<--semaphorename `tty`> unless
B<--semaphorename> is specified.
Used with B<--fg>, B<--wait>, and B<--semaphorename>.
The command B<sem> is an alias for B<parallel --semaphore>.
See also B<man sem>.
=item B<--semaphorename> I<name>
=item B<--id> I<name>
Use B<name> as the name of the semaphore. Default is the name of the
controlling tty (output from B<tty>).
The default normally works as expected when used interactively, but
when used in a script I<name> should be set. I<$$> or I<my_task_name>
are often a good value.
The semaphore is stored in ~/.parallel/semaphores/
Implies B<--semaphore>.
See also B<man sem>.
=item B<--semaphoretimeout> I<secs>
=item B<--st> I<secs>
If I<secs> > 0: If the semaphore is not released within I<secs> seconds, take it anyway.
If I<secs> < 0: If the semaphore is not released within I<secs> seconds, exit.
Implies B<--semaphore>.
See also B<man sem>.
=item B<--seqreplace> I<replace-str>
Use the replacement string I<replace-str> instead of B<{#}> for
job sequence number.
=item B<--session> (beta testing)
Record names in current environment in B<$PARALLEL_IGNORED_NAMES> and
exit. Only used with B<env_parallel>. Aliases, functions, and
variables with names in B<$PARALLEL_IGNORED_NAMES> will not be copied.
Only supported in B<Ash, Bash, Dash, Ksh, Sh, and Zsh>.
See also B<--env>, B<--record-env>.
=item B<--shebang>
=item B<--hashbang>
GNU B<parallel> can be called as a shebang (#!) command as the first
line of a script. The content of the file will be treated as
inputsource.
Like this:
#!/usr/bin/parallel --shebang -r wget
https://ftpmirror.gnu.org/parallel/parallel-20120822.tar.bz2
https://ftpmirror.gnu.org/parallel/parallel-20130822.tar.bz2
https://ftpmirror.gnu.org/parallel/parallel-20140822.tar.bz2
B<--shebang> must be set as the first option.
On FreeBSD B<env> is needed:
#!/usr/bin/env -S parallel --shebang -r wget
https://ftpmirror.gnu.org/parallel/parallel-20120822.tar.bz2
https://ftpmirror.gnu.org/parallel/parallel-20130822.tar.bz2
https://ftpmirror.gnu.org/parallel/parallel-20140822.tar.bz2
There are many limitations of shebang (#!) depending on your operating
system. See details on http://www.in-ulm.de/~mascheck/various/shebang/
=item B<--shebang-wrap>
GNU B<parallel> can parallelize scripts by wrapping the shebang
line. If the program can be run like this:
cat arguments | parallel the_program
then the script can be changed to:
#!/usr/bin/parallel --shebang-wrap /original/parser --options
E.g.
#!/usr/bin/parallel --shebang-wrap /usr/bin/python
If the program can be run like this:
cat data | parallel --pipe the_program
then the script can be changed to:
#!/usr/bin/parallel --shebang-wrap --pipe /orig/parser --opts
E.g.
#!/usr/bin/parallel --shebang-wrap --pipe /usr/bin/perl -w
B<--shebang-wrap> must be set as the first option.
=item B<--shellquote>
Does not run the command but quotes it. Useful for making quoted
composed commands for GNU B<parallel>.
=item B<--shuf>
Shuffle jobs. When having multiple input sources it is hard to
randomize jobs. --shuf will generate all jobs, and shuffle them before
running them. This is useful to get a quick preview of the results
before running the full batch.
=item B<--skip-first-line>
Do not use the first line of input (used by GNU B<parallel> itself
when called with B<--shebang>).
=item B<--sql> I<DBURL> (obsolete)
Use B<--sqlmaster> instead.
=item B<--sqlmaster> I<DBURL>
Submit jobs via SQL server. I<DBURL> must point to a table, which will
contain the same information as B<--joblog>, the values from the input
sources (stored in columns V1 .. Vn), and the output (stored in
columns Stdout and Stderr).
If I<DBURL> is prepended with '+' GNU B<parallel> assumes the table is
already made with the correct columns and appends the jobs to it.
If I<DBURL> is not prepended with '+' the table will be dropped and
created with the correct amount of V-columns unless
B<--sqlmaster> does not run any jobs, but it creates the values for
the jobs to be run. One or more B<--sqlworker> must be run to actually
execute the jobs.
If B<--wait> is set, GNU B<parallel> will wait for the jobs to
complete.
The format of a DBURL is:
[sql:]vendor://[[user][:pwd]@][host][:port]/[db]/table
E.g.
sql:mysql://hr:hr@localhost:3306/hrdb/jobs
mysql://scott:tiger@my.example.com/pardb/paralleljobs
sql:oracle://scott:tiger@ora.example.com/xe/parjob
postgresql://scott:tiger@pg.example.com/pgdb/parjob
pg:///parjob
sqlite3:///pardb/parjob
It can also be an alias from ~/.sql/aliases:
:myalias mysql:///mydb/paralleljobs
=item B<--sqlandworker> I<DBURL>
Shorthand for: B<--sqlmaster> I<DBURL> B<--sqlworker> I<DBURL>.
=item B<--sqlworker> I<DBURL>
Execute jobs via SQL server. Read the input sources variables from the
table pointed to by I<DBURL>. The I<command> on the command line
should be the same as given by B<--sqlmaster>.
If you have more than one B<--sqlworker> jobs may be run more than
once.
If B<--sqlworker> runs on the local machine, the hostname in the SQL
table will not be ':' but instead the hostname of the machine.
=item B<--ssh> I<sshcommand>
GNU B<parallel> defaults to using B<ssh> for remote access. This can
be overridden with B<--ssh>. It can also be set on a per server
basis (see B<--sshlogin>).
=item B<--sshdelay> I<secs>
Delay starting next ssh by I<secs> seconds. GNU B<parallel> will pause
I<secs> seconds after starting each ssh. I<secs> can be less than 1
seconds.
=item B<-S> I<[@hostgroups/][ncores/]sshlogin[,[@hostgroups/][ncores/]sshlogin[,...]]>
=item B<-S> I<@hostgroup>
=item B<--sshlogin> I<[@hostgroups/][ncores/]sshlogin[,[@hostgroups/][ncores/]sshlogin[,...]]>
=item B<--sshlogin> I<@hostgroup>
Distribute jobs to remote computers. The jobs will be run on a list of
remote computers.
If I<hostgroups> is given, the I<sshlogin> will be added to that
hostgroup. Multiple hostgroups are separated by '+'. The I<sshlogin>
will always be added to a hostgroup named the same as I<sshlogin>.
If only the I<@hostgroup> is given, only the sshlogins in that
hostgroup will be used. Multiple I<@hostgroup> can be given.
GNU B<parallel> will determine the number of CPU cores on the remote
computers and run the number of jobs as specified by B<-j>. If the
number I<ncores> is given GNU B<parallel> will use this number for
number of CPU cores on the host. Normally I<ncores> will not be
needed.
An I<sshlogin> is of the form:
[sshcommand [options]] [username@]hostname
The sshlogin must not require a password (B<ssh-agent>,
B<ssh-copy-id>, and B<sshpass> may help with that).
The sshlogin ':' is special, it means 'no ssh' and will therefore run
on the local computer.
The sshlogin '..' is special, it read sshlogins from ~/.parallel/sshloginfile or
$XDG_CONFIG_HOME/parallel/sshloginfile
The sshlogin '-' is special, too, it read sshlogins from stdin
(standard input).
To specify more sshlogins separate the sshlogins by comma, newline (in
the same string), or repeat the options multiple times.
For examples: see B<--sshloginfile>.
The remote host must have GNU B<parallel> installed.
B<--sshlogin> is known to cause problems with B<-m> and B<-X>.
B<--sshlogin> is often used with B<--transferfile>, B<--return>,
B<--cleanup>, and B<--trc>.
=item B<--sshloginfile> I<filename>
=item B<--slf> I<filename>
File with sshlogins. The file consists of sshlogins on separate
lines. Empty lines and lines starting with '#' are ignored. Example:
server.example.com
username@server2.example.com
8/my-8-core-server.example.com
2/my_other_username@my-dualcore.example.net
# This server has SSH running on port 2222
ssh -p 2222 server.example.net
4/ssh -p 2222 quadserver.example.net
# Use a different ssh program
myssh -p 2222 -l myusername hexacpu.example.net
# Use a different ssh program with default number of cores
//usr/local/bin/myssh -p 2222 -l myusername hexacpu
# Use a different ssh program with 6 cores
6//usr/local/bin/myssh -p 2222 -l myusername hexacpu
# Assume 16 cores on the local computer
16/:
# Put server1 in hostgroup1
@hostgroup1/server1
# Put myusername@server2 in hostgroup1+hostgroup2
@hostgroup1+hostgroup2/myusername@server2
# Force 4 cores and put 'ssh -p 2222 server3' in hostgroup1
@hostgroup1/4/ssh -p 2222 server3
When using a different ssh program the last argument must be the hostname.
Multiple B<--sshloginfile> are allowed.
GNU B<parallel> will first look for the file in current dir; if that
fails it look for the file in ~/.parallel.
The sshloginfile '..' is special, it read sshlogins from
~/.parallel/sshloginfile
The sshloginfile '.' is special, it read sshlogins from
/etc/parallel/sshloginfile
The sshloginfile '-' is special, too, it read sshlogins from stdin
(standard input).
If the sshloginfile is changed it will be re-read when a job finishes
though at most once per second. This makes it possible to add and
remove hosts while running.
This can be used to have a daemon that updates the sshloginfile to
only contain servers that are up:
cp original.slf tmp2.slf
while [ 1 ] ; do
nice parallel --nonall -j0 -k --slf original.slf \
--tag echo | perl 's/\t$//' > tmp.slf
if diff tmp.slf tmp2.slf; then
mv tmp.slf tmp2.slf
fi
sleep 10
done &
parallel --slf tmp2.slf ...
=item B<--slotreplace> I<replace-str>
Use the replacement string I<replace-str> instead of B<{%}> for
job slot number.
=item B<--silent>
Silent. The job to be run will not be printed. This is the default.
Can be reversed with B<-v>.
=item B<--tty>
Open terminal tty. If GNU B<parallel> is used for starting a program
that accesses the tty (such as an interactive program) then this
option may be needed. It will default to starting only one job at a
time (i.e. B<-j1>), not buffer the output (i.e. B<-u>), and it will
open a tty for the job.
You can of course override B<-j1> and B<-u>.
=item B<--tag>
Tag lines with arguments. Each output line will be prepended with the
arguments and TAB (\t). When combined with B<--onall> or B<--nonall>
the lines will be prepended with the sshlogin instead.
B<--tag> is ignored when using B<-u>.
=item B<--tagstring> I<str>
Tag lines with a string. Each output line will be prepended with
I<str> and TAB (\t). I<str> can contain replacement strings such as
B<{}>.
B<--tagstring> is ignored when using B<-u>, B<--onall>, and B<--nonall>.
=item B<--tee>
Pipe all data to all jobs. Used with B<--pipe>/B<--pipepart> and
B<:::>.
seq 1000 | parallel --pipe --tee -v wc {} ::: -w -l -c
How many numbers in 1..1000 contain 0..9, and how many bytes do they
fill:
seq 1000 | parallel --pipe --tee --tag \
'grep {1} | wc {2}' ::: {0..9} ::: -l -c
How many words contain a..z and how many bytes do they fill?
parallel -a /usr/share/dict/words --pipepart --tee --tag \
'grep {1} | wc {2}' ::: {a..z} ::: -l -c
=item B<--termseq> I<sequence>
Termination sequence. When a job is killed due to B<--timeout>,
B<--memfree>, B<--halt>, or abnormal termination of GNU B<parallel>,
I<sequence> determines how the job is killed. The default is:
TERM,200,TERM,100,TERM,50,KILL,25
which sends a TERM signal, waits 200 ms, sends another TERM signal,
waits 100 ms, sends another TERM signal, waits 50 ms, sends a KILL
signal, waits 25 ms, and exits. GNU B<parallel> detects if a process
dies before the waiting time is up.
=item B<--tmpdir> I<dirname>
Directory for temporary files. GNU B<parallel> normally buffers output
into temporary files in /tmp. By setting B<--tmpdir> you can use a
different dir for the files. Setting B<--tmpdir> is equivalent to
setting $TMPDIR.
=item B<--tmux> (Long beta testing)
Use B<tmux> for output. Start a B<tmux> session and run each job in a
window in that session. No other output will be produced.
=item B<--tmuxpane> (Long beta testing)
Use B<tmux> for output but put output into panes in the first window.
Useful if you want to monitor the progress of less than 100 concurrent
jobs.
=item B<--timeout> I<duration>
Time out for command. If the command runs for longer than I<duration>
seconds it will get killed as per B<--termseq>.
If I<duration> is followed by a % then the timeout will dynamically be
computed as a percentage of the median average runtime of successful
jobs. Only values > 100% will make sense.
I<duration> is normally in seconds, but can be floats postfixed with
B<s>, B<m>, B<h>, or B<d> which would multiply the float by 1, 60,
3600, or 86400. Thus these are equivalent: B<--timeout 100000> and
B<--timeout 1d3.5h16.6m4s>.
=item B<--verbose>
=item B<-t>
Print the job to be run on stderr (standard error).
See also B<-v>, B<-p>.
=item B<--transfer>
Transfer files to remote computers. Shorthand for: B<--transferfile {}>.
=item B<--transferfile> I<filename>
=item B<--tf> I<filename>
B<--transferfile> is used with B<--sshlogin> to transfer files to the
remote computers. The files will be transferred using B<rsync> and
will be put relative to the default work dir. If the path contains /./
the remaining path will be relative to the work dir. E.g.
echo foo/bar.txt | parallel --transferfile {} \
--sshlogin server.example.com wc
This will transfer the file I<foo/bar.txt> to the computer
I<server.example.com> to the file I<$HOME/foo/bar.txt> before running
B<wc foo/bar.txt> on I<server.example.com>.
echo /tmp/foo/bar.txt | parallel --transferfile {} \
--sshlogin server.example.com wc
This will transfer the file I</tmp/foo/bar.txt> to the computer
I<server.example.com> to the file I</tmp/foo/bar.txt> before running
B<wc /tmp/foo/bar.txt> on I<server.example.com>.
echo /tmp/./foo/bar.txt | parallel --transferfile {} \
--sshlogin server.example.com wc {= s:.*/./:./: =}
This will transfer the file I</tmp/foo/bar.txt> to the computer
I<server.example.com> to the file I<foo/bar.txt> before running
B<wc ./foo/bar.txt> on I<server.example.com>.
B<--transferfile> is often used with B<--return> and B<--cleanup>. A
shorthand for B<--transferfile {}> is B<--transfer>.
B<--transferfile> is ignored when used with B<--sshlogin :> or when
not used with B<--sshlogin>.
=item B<--trc> I<filename>
Transfer, Return, Cleanup. Shorthand for:
B<--transferfile {}> B<--return> I<filename> B<--cleanup>
=item B<--trim> <n|l|r|lr|rl>
Trim white space in input.
=over 4
=item n
No trim. Input is not modified. This is the default.
=item l
Left trim. Remove white space from start of input. E.g. " a bc " -> "a bc ".
=item r
Right trim. Remove white space from end of input. E.g. " a bc " -> " a bc".
=item lr
=item rl
Both trim. Remove white space from both start and end of input. E.g. "
a bc " -> "a bc". This is the default if B<--colsep> is used.
=back
=item B<--ungroup>
=item B<-u>
Ungroup output. Output is printed as soon as possible and bypasses
GNU B<parallel> internal processing. This may cause output from
different commands to be mixed thus should only be used if you do not
care about the output. Compare these:
seq 4 | parallel -j0 \
'sleep {};echo -n start{};sleep {};echo {}end'
seq 4 | parallel -u -j0 \
'sleep {};echo -n start{};sleep {};echo {}end'
It also disables B<--tag>. GNU B<parallel> outputs faster with
B<-u>. Compare the speeds of these:
parallel seq ::: 300000000 >/dev/null
parallel -u seq ::: 300000000 >/dev/null
parallel --line-buffer seq ::: 300000000 >/dev/null
Can be reversed with B<--group>.
See also: B<--line-buffer> B<--group>
=item B<--extensionreplace> I<replace-str>
=item B<--er> I<replace-str>
Use the replacement string I<replace-str> instead of B<{.}> for input
line without extension.
=item B<--use-cpus-instead-of-cores>
Count the number of physical CPUs instead of CPU cores. When computing
how many jobs to run simultaneously relative to the number of CPU cores
you can ask GNU B<parallel> to instead look at the number of physical
CPUs. This will make sense for computers that have hyperthreading as
two jobs running on one CPU with hyperthreading will run slower than
two jobs running on two physical CPUs. Some multi-core CPUs can run
faster if only one thread is running per physical CPU. Most users will
not need this option.
=item B<-v>
Verbose. Print the job to be run on stdout (standard output). Can be reversed
with B<--silent>. See also B<-t>.
Use B<-v> B<-v> to print the wrapping ssh command when running remotely.
=item B<--version>
=item B<-V>
Print the version GNU B<parallel> and exit.
=item B<--workdir> I<mydir>
=item B<--wd> I<mydir>
Files transferred using B<--transferfile> and B<--return> will be
relative to I<mydir> on remote computers, and the command will be
executed in the dir I<mydir>.
The special I<mydir> value B<...> will create working dirs under
B<~/.parallel/tmp/> on the remote computers. If B<--cleanup> is given
these dirs will be removed.
The special I<mydir> value B<.> uses the current working dir. If the
current working dir is beneath your home dir, the value B<.> is
treated as the relative path to your home dir. This means that if your
home dir is different on remote computers (e.g. if your login is
different) the relative path will still be relative to your home dir.
To see the difference try:
parallel -S server pwd ::: ""
parallel --wd . -S server pwd ::: ""
parallel --wd ... -S server pwd ::: ""
I<mydir> can contain GNU B<parallel>'s replacement strings.
=item B<--wait>
Wait for all commands to complete.
Used with B<--semaphore> or B<--sqlmaster>.
See also B<man sem>.
=item B<-X>
Multiple arguments with context replace. Insert as many arguments as
the command line length permits. If multiple jobs are being run in
parallel: distribute the arguments evenly among the jobs. Use B<-j1>
to avoid this.
If B<{}> is not used the arguments will be appended to the line. If
B<{}> is used as part of a word (like I<pic{}.jpg>) then the whole
word will be repeated. If B<{}> is used multiple times each B<{}> will
be replaced with the arguments.
Normally B<-X> will do the right thing, whereas B<-m> can give
unexpected results if B<{}> is used as part of a word.
Support for B<-X> with B<--sshlogin> is limited and may fail.
See also B<-m>.
=item B<--exit>
=item B<-x>
Exit if the size (see the B<-s> option) is exceeded.
=back
=head1 EXAMPLE: Working as xargs -n1. Argument appending
GNU B<parallel> can work similar to B<xargs -n1>.
To compress all html files using B<gzip> run:
find . -name '*.html' | parallel gzip --best
If the file names may contain a newline use B<-0>. Substitute FOO BAR with
FUBAR in all files in this dir and subdirs:
find . -type f -print0 | parallel -q0 perl -i -pe 's/FOO BAR/FUBAR/g'
Note B<-q> is needed because of the space in 'FOO BAR'.
=head1 EXAMPLE: Reading arguments from command line
GNU B<parallel> can take the arguments from command line instead of
stdin (standard input). To compress all html files in the current dir
using B<gzip> run:
parallel gzip --best ::: *.html
To convert *.wav to *.mp3 using LAME running one process per CPU core
run:
parallel lame {} -o {.}.mp3 ::: *.wav
=head1 EXAMPLE: Inserting multiple arguments
When moving a lot of files like this: B<mv *.log destdir> you will
sometimes get the error:
bash: /bin/mv: Argument list too long
because there are too many files. You can instead do:
ls | grep -E '\.log$' | parallel mv {} destdir
This will run B<mv> for each file. It can be done faster if B<mv> gets
as many arguments that will fit on the line:
ls | grep -E '\.log$' | parallel -m mv {} destdir
In many shells you can also use B<printf>:
printf '%s\0' *.log | parallel -0 -m mv {} destdir
=head1 EXAMPLE: Context replace
To remove the files I<pict0000.jpg> .. I<pict9999.jpg> you could do:
seq -w 0 9999 | parallel rm pict{}.jpg
You could also do:
seq -w 0 9999 | perl -pe 's/(.*)/pict$1.jpg/' | parallel -m rm
The first will run B<rm> 10000 times, while the last will only run
B<rm> as many times needed to keep the command line length short
enough to avoid B<Argument list too long> (it typically runs 1-2 times).
You could also run:
seq -w 0 9999 | parallel -X rm pict{}.jpg
This will also only run B<rm> as many times needed to keep the command
line length short enough.
=head1 EXAMPLE: Compute intensive jobs and substitution
If ImageMagick is installed this will generate a thumbnail of a jpg
file:
convert -geometry 120 foo.jpg thumb_foo.jpg
This will run with number-of-cpu-cores jobs in parallel for all jpg
files in a directory:
ls *.jpg | parallel convert -geometry 120 {} thumb_{}
To do it recursively use B<find>:
find . -name '*.jpg' | parallel convert -geometry 120 {} {}_thumb.jpg
Notice how the argument has to start with B<{}> as B<{}> will include path
(e.g. running B<convert -geometry 120 ./foo/bar.jpg
thumb_./foo/bar.jpg> would clearly be wrong). The command will
generate files like ./foo/bar.jpg_thumb.jpg.
Use B<{.}> to avoid the extra .jpg in the file name. This command will
make files like ./foo/bar_thumb.jpg:
find . -name '*.jpg' | parallel convert -geometry 120 {} {.}_thumb.jpg
=head1 EXAMPLE: Substitution and redirection
This will generate an uncompressed version of .gz-files next to the .gz-file:
parallel zcat {} ">"{.} ::: *.gz
Quoting of > is necessary to postpone the redirection. Another
solution is to quote the whole command:
parallel "zcat {} >{.}" ::: *.gz
Other special shell characters (such as * ; $ > < | >> <<) also need
to be put in quotes, as they may otherwise be interpreted by the shell
and not given to GNU B<parallel>.
=head1 EXAMPLE: Composed commands
A job can consist of several commands. This will print the number of
files in each directory:
ls | parallel 'echo -n {}" "; ls {}|wc -l'
To put the output in a file called <name>.dir:
ls | parallel '(echo -n {}" "; ls {}|wc -l) >{}.dir'
Even small shell scripts can be run by GNU B<parallel>:
find . | parallel 'a={}; name=${a##*/};' \
'upper=$(echo "$name" | tr "[:lower:]" "[:upper:]");'\
'echo "$name - $upper"'
ls | parallel 'mv {} "$(echo {} | tr "[:upper:]" "[:lower:]")"'
Given a list of URLs, list all URLs that fail to download. Print the
line number and the URL.
cat urlfile | parallel "wget {} 2>/dev/null || grep -n {} urlfile"
Create a mirror directory with the same filenames except all files and
symlinks are empty files.
cp -rs /the/source/dir mirror_dir
find mirror_dir -type l | parallel -m rm {} '&&' touch {}
Find the files in a list that do not exist
cat file_list | parallel 'if [ ! -e {} ] ; then echo {}; fi'
=head1 EXAMPLE: Composed command with multiple input sources
You have a dir with files named as 24 hours in 5 minute intervals:
00:00, 00:05, 00:10 .. 23:55. You want to find the files missing:
parallel [ -f {1}:{2} ] "||" echo {1}:{2} does not exist \
::: {00..23} ::: {00..55..5}
=head1 EXAMPLE: Calling Bash functions
If the composed command is longer than a line, it becomes hard to
read. In Bash you can use functions. Just remember to B<export -f> the
function.
doit() {
echo Doing it for $1
sleep 2
echo Done with $1
}
export -f doit
parallel doit ::: 1 2 3
doubleit() {
echo Doing it for $1 $2
sleep 2
echo Done with $1 $2
}
export -f doubleit
parallel doubleit ::: 1 2 3 ::: a b
To do this on remote servers you need to transfer the function using
B<--env>:
parallel --env doit -S server doit ::: 1 2 3
parallel --env doubleit -S server doubleit ::: 1 2 3 ::: a b
If your environment (aliases, variables, and functions) is small you
can copy the full environment without having to B<export -f>
anything. See B<env_parallel>.
=head1 EXAMPLE: Function tester
To test a program with different parameters:
tester() {
if (eval "$@") >&/dev/null; then
perl -e 'printf "\033[30;102m[ OK ]\033[0m @ARGV\n"' "$@"
else
perl -e 'printf "\033[30;101m[FAIL]\033[0m @ARGV\n"' "$@"
fi
}
export -f tester
parallel tester my_program ::: arg1 arg2
parallel tester exit ::: 1 0 2 0
If B<my_program> fails a red FAIL will be printed followed by the failing
command; otherwise a green OK will be printed followed by the command.
=head1 EXAMPLE: Log rotate
Log rotation renames a logfile to an extension with a higher number:
log.1 becomes log.2, log.2 becomes log.3, and so on. The oldest log is
removed. To avoid overwriting files the process starts backwards from
the high number to the low number. This will keep 10 old versions of
the log:
seq 9 -1 1 | parallel -j1 mv log.{} log.'{= $_++ =}'
mv log log.1
=head1 EXAMPLE: Removing file extension when processing files
When processing files removing the file extension using B<{.}> is
often useful.
Create a directory for each zip-file and unzip it in that dir:
parallel 'mkdir {.}; cd {.}; unzip ../{}' ::: *.zip
Recompress all .gz files in current directory using B<bzip2> running 1
job per CPU core in parallel:
parallel "zcat {} | bzip2 >{.}.bz2 && rm {}" ::: *.gz
Convert all WAV files to MP3 using LAME:
find sounddir -type f -name '*.wav' | parallel lame {} -o {.}.mp3
Put all converted in the same directory:
find sounddir -type f -name '*.wav' | \
parallel lame {} -o mydir/{/.}.mp3
=head1 EXAMPLE: Removing strings from the argument
If you have directory with tar.gz files and want these extracted in
the corresponding dir (e.g foo.tar.gz will be extracted in the dir
foo) you can do:
parallel --plus 'mkdir {..}; tar -C {..} -xf {}' ::: *.tar.gz
If you want to remove a different ending, you can use {%string}:
parallel --plus echo {%_demo} ::: mycode_demo keep_demo_here
You can also remove a starting string with {#string}
parallel --plus echo {#demo_} ::: demo_mycode keep_demo_here
To remove a string anywhere you can use regular expressions with
{/regexp/replacement} and leave the replacement empty:
parallel --plus echo {/demo_/} ::: demo_mycode remove_demo_here
=head1 EXAMPLE: Download 24 images for each of the past 30 days
Let us assume a website stores images like:
http://www.example.com/path/to/YYYYMMDD_##.jpg
where YYYYMMDD is the date and ## is the number 01-24. This will
download images for the past 30 days:
getit() {
date=$(date -d "today -$1 days" +%Y%m%d)
num=$2
echo wget http://www.example.com/path/to/${date}_${num}.jpg
}
export -f getit
parallel getit ::: $(seq 30) ::: $(seq -w 24)
B<$(date -d "today -$1 days" +%Y%m%d)> will give the dates in
YYYYMMDD with B<$1> days subtracted.
=head1 EXAMPLE: Download world map from NASA
NASA provides tiles to download on earthdata.nasa.gov. Download tiles
for Blue Marble world map and create a 10240x20480 map.
base=https://map1a.vis.earthdata.nasa.gov/wmts-geo/wmts.cgi
service="SERVICE=WMTS&REQUEST=GetTile&VERSION=1.0.0"
layer="LAYER=BlueMarble_ShadedRelief_Bathymetry"
set="STYLE=&TILEMATRIXSET=EPSG4326_500m&TILEMATRIX=5"
tile="TILEROW={1}&TILECOL={2}"
format="FORMAT=image%2Fjpeg"
url="$base?$service&$layer&$set&$tile&$format"
parallel -j0 -q wget "$url" -O {1}_{2}.jpg ::: {0..19} ::: {0..39}
parallel eval convert +append {}_{0..39}.jpg line{}.jpg ::: {0..19}
convert -append line{0..19}.jpg world.jpg
=head1 EXAMPLE: Download Apollo-11 images from NASA using jq
Search NASA using their API to get JSON for images related to 'apollo
11' and has 'moon landing' in the description.
The search query returns JSON containing URLs to JSON containing
collections of pictures. One of the pictures in each of these
collection is I<large>.
B<wget> is used to get the JSON for the search query. B<jq> is then
used to extract the URLs of the collections. B<parallel> then calls
B<wget> to get each collection, which is passed to B<jq> to extract
the URLs of all images. B<grep> filters out the I<large> images, and
B<parallel> finally uses B<wget> to fetch the images.
base="https://images-api.nasa.gov/search"
q="q=apollo 11"
description="description=moon landing"
media_type="media_type=image"
wget -O - "$base?$q&$description&$media_type" |
jq -r .collection.items[].href |
parallel wget -O - |
jq -r .[] |
grep large |
parallel wget
=head1 EXAMPLE: Copy files as last modified date (ISO8601) with added
random digits
find . | parallel cp {} '../destdir/{= $a=int(10000*rand); $_=pQ($_);
$_=`date -r "$_" +%FT%T"$a"`; chomp; =}'
B<{=> and B<=}> mark a perl expression. B<pQ> quotes the
string. B<date +%FT%T> is the date in ISO8601 with time.
=head1 EXAMPLE: Digtal clock with "blinking" :
The : in a digital clock blinks. To make every other line have a ':'
and the rest a ' ' a perl expression is used to look at the 3rd input
source. If the value modudo 2 is 1: Use ":" otherwise use " ":
parallel -k echo {1}'{=3 $_=$_%2?":":" "=}'{2}{3} \
::: {0..12} ::: {0..5} ::: {0..9}
=head1 EXAMPLE: Aggregating content of files
This:
parallel --header : echo x{X}y{Y}z{Z} \> x{X}y{Y}z{Z} \
::: X {1..5} ::: Y {01..10} ::: Z {1..5}
will generate the files x1y01z1 .. x5y10z5. If you want to aggregate
the output grouping on x and z you can do this:
parallel eval 'cat {=s/y01/y*/=} > {=s/y01//=}' ::: *y01*
For all values of x and z it runs commands like:
cat x1y*z1 > x1z1
So you end up with x1z1 .. x5z5 each containing the content of all
values of y.
=head1 EXAMPLE: Breadth first parallel web crawler/mirrorer
This script below will crawl and mirror a URL in parallel. It
downloads first pages that are 1 click down, then 2 clicks down, then
3; instead of the normal depth first, where the first link link on
each page is fetched first.
Run like this:
PARALLEL=-j100 ./parallel-crawl http://gatt.org.yeslab.org/
Remove the B<wget> part if you only want a web crawler.
It works by fetching a page from a list of URLs and looking for links
in that page that are within the same starting URL and that have not
already been seen. These links are added to a new queue. When all the
pages from the list is done, the new queue is moved to the list of
URLs and the process is started over until no unseen links are found.
#!/bin/bash
# E.g. http://gatt.org.yeslab.org/
URL=$1
# Stay inside the start dir
BASEURL=$(echo $URL | perl -pe 's:#.*::; s:(//.*/)[^/]*:$1:')
URLLIST=$(mktemp urllist.XXXX)
URLLIST2=$(mktemp urllist.XXXX)
SEEN=$(mktemp seen.XXXX)
# Spider to get the URLs
echo $URL >$URLLIST
cp $URLLIST $SEEN
while [ -s $URLLIST ] ; do
cat $URLLIST |
parallel lynx -listonly -image_links -dump {} \; \
wget -qm -l1 -Q1 {} \; echo Spidered: {} \>\&2 |
perl -ne 's/#.*//; s/\s+\d+.\s(\S+)$/$1/ and
do { $seen{$1}++ or print }' |
grep -F $BASEURL |
grep -v -x -F -f $SEEN | tee -a $SEEN > $URLLIST2
mv $URLLIST2 $URLLIST
done
rm -f $URLLIST $URLLIST2 $SEEN
=head1 EXAMPLE: Process files from a tar file while unpacking
If the files to be processed are in a tar file then unpacking one file
and processing it immediately may be faster than first unpacking all
files.
tar xvf foo.tgz | perl -ne 'print $l;$l=$_;END{print $l}' | \
parallel echo
The Perl one-liner is needed to make sure the file is complete before
handing it to GNU B<parallel>.
=head1 EXAMPLE: Rewriting a for-loop and a while-read-loop
for-loops like this:
(for x in `cat list` ; do
do_something $x
done) | process_output
and while-read-loops like this:
cat list | (while read x ; do
do_something $x
done) | process_output
can be written like this:
cat list | parallel do_something | process_output
For example: Find which host name in a list has IP address 1.2.3 4:
cat hosts.txt | parallel -P 100 host | grep 1.2.3.4
If the processing requires more steps the for-loop like this:
(for x in `cat list` ; do
no_extension=${x%.*};
do_step1 $x scale $no_extension.jpg
do_step2 <$x $no_extension
done) | process_output
and while-loops like this:
cat list | (while read x ; do
no_extension=${x%.*};
do_step1 $x scale $no_extension.jpg
do_step2 <$x $no_extension
done) | process_output
can be written like this:
cat list | parallel "do_step1 {} scale {.}.jpg ; do_step2 <{} {.}" |\
process_output
If the body of the loop is bigger, it improves readability to use a function:
(for x in `cat list` ; do
do_something $x
[... 100 lines that do something with $x ...]
done) | process_output
cat list | (while read x ; do
do_something $x
[... 100 lines that do something with $x ...]
done) | process_output
can both be rewritten as:
doit() {
x=$1
do_something $x
[... 100 lines that do something with $x ...]
}
export -f doit
cat list | parallel doit
=head1 EXAMPLE: Rewriting nested for-loops
Nested for-loops like this:
(for x in `cat xlist` ; do
for y in `cat ylist` ; do
do_something $x $y
done
done) | process_output
can be written like this:
parallel do_something {1} {2} :::: xlist ylist | process_output
Nested for-loops like this:
(for colour in red green blue ; do
for size in S M L XL XXL ; do
echo $colour $size
done
done) | sort
can be written like this:
parallel echo {1} {2} ::: red green blue ::: S M L XL XXL | sort
=head1 EXAMPLE: Finding the lowest difference between files
B<diff> is good for finding differences in text files. B<diff | wc -l>
gives an indication of the size of the difference. To find the
differences between all files in the current dir do:
parallel --tag 'diff {1} {2} | wc -l' ::: * ::: * | sort -nk3
This way it is possible to see if some files are closer to other
files.
=head1 EXAMPLE: for-loops with column names
When doing multiple nested for-loops it can be easier to keep track of
the loop variable if is is named instead of just having a number. Use
B<--header :> to let the first argument be an named alias for the
positional replacement string:
parallel --header : echo {colour} {size} \
::: colour red green blue ::: size S M L XL XXL
This also works if the input file is a file with columns:
cat addressbook.tsv | \
parallel --colsep '\t' --header : echo {Name} {E-mail address}
=head1 EXAMPLE: All combinations in a list
GNU B<parallel> makes all combinations when given two lists.
To make all combinations in a single list with unique values, you
repeat the list and use replacement string with a Perl expression that
skips the job if the value from input source 1 is greater than or
equal to the value from input source 2:
parallel echo {= 'if($arg[1] ge $arg[2]) { skip() }' =} ::: A B C D ::: A B C D
Or more generally:
parallel echo \
'{= for $t (2..$#arg){ if($arg[$t-1] ge $arg[$t]) { skip() } } =}' \
::: A B C D ::: A B C D ::: A B C D
=head1 EXAMPLE: From a to b and b to c
Assume you have input like:
aardvark
babble
cab
dab
each
and want to run combinations like:
aardvark babble
babble cab
cab dab
dab each
If the input is in the file in.txt:
parallel echo {1} - {2} ::::+ <(head -n -1 in.txt) <(tail -n +2 in.txt)
If the input is in the array $a here are two solutions:
seq $((${#a[@]}-1)) | env_parallel --env a echo '${a[{=$_--=}]} - ${a[{}]}'
parallel echo {1} - {2} ::: "${a[@]::${#a[@]}-1}" :::+ "${a[@]:1}"
=head1 EXAMPLE: Count the differences between all files in a dir
Using B<--results> the results are saved in /tmp/diffcount*.
parallel --results /tmp/diffcount "diff -U 0 {1} {2} | \
tail -n +3 |grep -v '^@'|wc -l" ::: * ::: *
To see the difference between file A and file B look at the file
'/tmp/diffcount/1/A/2/B'.
=head1 EXAMPLE: Speeding up fast jobs
Starting a job on the local machine takes around 10 ms. This can be a
big overhead if the job takes very few ms to run. Often you can group
small jobs together using B<-X> which will make the overhead less
significant. Compare the speed of these:
seq -w 0 9999 | parallel touch pict{}.jpg
seq -w 0 9999 | parallel -X touch pict{}.jpg
If your program cannot take multiple arguments, then you can use GNU
B<parallel> to spawn multiple GNU B<parallel>s:
seq -w 0 9999999 |
parallel -j10 -q -I,, --pipe parallel -j0 touch pict{}.jpg
If B<-j0> normally spawns 252 jobs, then the above will try to spawn
2520 jobs. On a normal GNU/Linux system you can spawn 32000 jobs using
this technique with no problems. To raise the 32000 jobs limit raise
/proc/sys/kernel/pid_max to 4194303.
=head1 EXAMPLE: Using shell variables
When using shell variables you need to quote them correctly as they
may otherwise be interpreted by the shell.
Notice the difference between:
ARR=("My brother's 12\" records are worth <\$\$\$>"'!' Foo Bar)
parallel echo ::: ${ARR[@]} # This is probably not what you want
and:
ARR=("My brother's 12\" records are worth <\$\$\$>"'!' Foo Bar)
parallel echo ::: "${ARR[@]}"
When using variables in the actual command that contains special
characters (e.g. space) you can quote them using B<'"$VAR"'> or using
"'s and B<-q>:
VAR="My brother's 12\" records are worth <\$\$\$>"
parallel -q echo "$VAR" ::: '!'
export VAR
parallel echo '"$VAR"' ::: '!'
If B<$VAR> does not contain ' then B<"'$VAR'"> will also work
(and does not need B<export>):
VAR="My 12\" records are worth <\$\$\$>"
parallel echo "'$VAR'" ::: '!'
If you use them in a function you just quote as you normally would do:
VAR="My brother's 12\" records are worth <\$\$\$>"
export VAR
myfunc() { echo "$VAR" "$1"; }
export -f myfunc
parallel myfunc ::: '!'
=head1 EXAMPLE: Group output lines
When running jobs that output data, you often do not want the output
of multiple jobs to run together. GNU B<parallel> defaults to grouping
the output of each job, so the output is printed when the job
finishes. If you want full lines to be printed while the job is
running you can use B<--line-buffer>. If you want output to be
printed as soon as possible you can use B<-u>.
Compare the output of:
parallel wget --limit-rate=100k \
https://ftpmirror.gnu.org/parallel/parallel-20{}0822.tar.bz2 \
::: {12..16}
parallel --line-buffer wget --limit-rate=100k \
https://ftpmirror.gnu.org/parallel/parallel-20{}0822.tar.bz2 \
::: {12..16}
parallel -u wget --limit-rate=100k \
https://ftpmirror.gnu.org/parallel/parallel-20{}0822.tar.bz2 \
::: {12..16}
=head1 EXAMPLE: Tag output lines
GNU B<parallel> groups the output lines, but it can be hard to see
where the different jobs begin. B<--tag> prepends the argument to make
that more visible:
parallel --tag wget --limit-rate=100k \
https://ftpmirror.gnu.org/parallel/parallel-20{}0822.tar.bz2 \
::: {12..16}
B<--tag> works with B<--line-buffer> but not with B<-u>:
parallel --tag --line-buffer wget --limit-rate=100k \
https://ftpmirror.gnu.org/parallel/parallel-20{}0822.tar.bz2 \
::: {12..16}
Check the uptime of the servers in I<~/.parallel/sshloginfile>:
parallel --tag -S .. --nonall uptime
=head1 EXAMPLE: Colorize output
Give each job a new color. Most terminals support ANSI colors with the
escape code "\033[30;3Xm" where 0 <= X <= 7:
parallel --tagstring '\033[30;3{=$_=++$::color%8=}m' seq {} ::: {1..10}
parallel --rpl '{color} $_="\033[30;3".(++$::color%8)."m"' \
--tagstring {color} seq {} ::: {1..10}
To get rid of the initial \t (which comes from B<--tagstring>):
... | perl -pe 's/\t//'
=head1 EXAMPLE: Keep order of output same as order of input
Normally the output of a job will be printed as soon as it
completes. Sometimes you want the order of the output to remain the
same as the order of the input. This is often important, if the output
is used as input for another system. B<-k> will make sure the order of
output will be in the same order as input even if later jobs end
before earlier jobs.
Append a string to every line in a text file:
cat textfile | parallel -k echo {} append_string
If you remove B<-k> some of the lines may come out in the wrong order.
Another example is B<traceroute>:
parallel traceroute ::: qubes-os.org debian.org freenetproject.org
will give traceroute of qubes-os.org, debian.org and
freenetproject.org, but it will be sorted according to which job
completed first.
To keep the order the same as input run:
parallel -k traceroute ::: qubes-os.org debian.org freenetproject.org
This will make sure the traceroute to qubes-os.org will be printed
first.
A bit more complex example is downloading a huge file in chunks in
parallel: Some internet connections will deliver more data if you
download files in parallel. For downloading files in parallel see:
"EXAMPLE: Download 10 images for each of the past 30 days". But if you
are downloading a big file you can download the file in chunks in
parallel.
To download byte 10000000-19999999 you can use B<curl>:
curl -r 10000000-19999999 http://example.com/the/big/file >file.part
To download a 1 GB file we need 100 10MB chunks downloaded and
combined in the correct order.
seq 0 99 | parallel -k curl -r \
{}0000000-{}9999999 http://example.com/the/big/file > file
=head1 EXAMPLE: Parallel grep
B<grep -r> greps recursively through directories. On multicore CPUs
GNU B<parallel> can often speed this up.
find . -type f | parallel -k -j150% -n 1000 -m grep -H -n STRING {}
This will run 1.5 job per core, and give 1000 arguments to B<grep>.
=head1 EXAMPLE: Grepping n lines for m regular expressions.
The simplest solution to grep a big file for a lot of regexps is:
grep -f regexps.txt bigfile
Or if the regexps are fixed strings:
grep -F -f regexps.txt bigfile
There are 3 limiting factors: CPU, RAM, and disk I/O.
RAM is easy to measure: If the B<grep> process takes up most of your
free memory (e.g. when running B<top>), then RAM is a limiting factor.
CPU is also easy to measure: If the B<grep> takes >90% CPU in B<top>,
then the CPU is a limiting factor, and parallelization will speed this
up.
It is harder to see if disk I/O is the limiting factor, and depending
on the disk system it may be faster or slower to parallelize. The only
way to know for certain is to test and measure.
=head2 Limiting factor: RAM
The normal B<grep -f regexs.txt bigfile> works no matter the size of
bigfile, but if regexps.txt is so big it cannot fit into memory, then
you need to split this.
B<grep -F> takes around 100 bytes of RAM and B<grep> takes about 500
bytes of RAM per 1 byte of regexp. So if regexps.txt is 1% of your
RAM, then it may be too big.
If you can convert your regexps into fixed strings do that. E.g. if
the lines you are looking for in bigfile all looks like:
ID1 foo bar baz Identifier1 quux
fubar ID2 foo bar baz Identifier2
then your regexps.txt can be converted from:
ID1.*Identifier1
ID2.*Identifier2
into:
ID1 foo bar baz Identifier1
ID2 foo bar baz Identifier2
This way you can use B<grep -F> which takes around 80% less memory and
is much faster.
If it still does not fit in memory you can do this:
parallel --pipepart -a regexps.txt --block 1M grep -Ff - -n bigfile |
sort -un | perl -pe 's/^\d+://'
The 1M should be your free memory divided by the number of cores and
divided by 200 for B<grep -F> and by 1000 for normal B<grep>. On
GNU/Linux you can do:
free=$(awk '/^((Swap)?Cached|MemFree|Buffers):/ { sum += $2 }
END { print sum }' /proc/meminfo)
percpu=$((free / 200 / $(parallel --number-of-cores)))k
parallel --pipepart -a regexps.txt --block $percpu --compress \
grep -F -f - -n bigfile |
sort -un | perl -pe 's/^\d+://'
If you can live with duplicated lines and wrong order, it is faster to do:
parallel --pipepart -a regexps.txt --block $percpu --compress \
grep -F -f - bigfile
=head2 Limiting factor: CPU
If the CPU is the limiting factor parallelization should be done on
the regexps:
cat regexp.txt | parallel --pipe -L1000 --round-robin --compress \
grep -f - -n bigfile |
sort -un | perl -pe 's/^\d+://'
The command will start one B<grep> per CPU and read I<bigfile> one
time per CPU, but as that is done in parallel, all reads except the
first will be cached in RAM. Depending on the size of I<regexp.txt> it
may be faster to use B<--block 10m> instead of B<-L1000>.
Some storage systems perform better when reading multiple chunks in
parallel. This is true for some RAID systems and for some network file
systems. To parallelize the reading of I<bigfile>:
parallel --pipepart --block 100M -a bigfile -k --compress \
grep -f regexp.txt
This will split I<bigfile> into 100MB chunks and run B<grep> on each of
these chunks. To parallelize both reading of I<bigfile> and I<regexp.txt>
combine the two using B<--fifo>:
parallel --pipepart --block 100M -a bigfile --fifo cat regexp.txt \
\| parallel --pipe -L1000 --round-robin grep -f - {}
If a line matches multiple regexps, the line may be duplicated.
=head2 Bigger problem
If the problem is too big to be solved by this, you are probably ready
for Lucene.
=head1 EXAMPLE: Using remote computers
To run commands on a remote computer SSH needs to be set up and you
must be able to login without entering a password (The commands
B<ssh-copy-id>, B<ssh-agent>, and B<sshpass> may help you do that).
If you need to login to a whole cluster, you typically do not want to
accept the host key for every host. You want to accept them the first
time and be warned if they are ever changed. To do that:
# Add the servers to the sshloginfile
(echo servera; echo serverb) > .parallel/my_cluster
# Make sure .ssh/config exist
touch .ssh/config
cp .ssh/config .ssh/config.backup
# Disable StrictHostKeyChecking temporarily
(echo 'Host *'; echo StrictHostKeyChecking no) >> .ssh/config
parallel --slf my_cluster --nonall true
# Remove the disabling of StrictHostKeyChecking
mv .ssh/config.backup .ssh/config
The servers in B<.parallel/my_cluster> are now added in B<.ssh/known_hosts>.
To run B<echo> on B<server.example.com>:
seq 10 | parallel --sshlogin server.example.com echo
To run commands on more than one remote computer run:
seq 10 | parallel --sshlogin server.example.com,server2.example.net echo
Or:
seq 10 | parallel --sshlogin server.example.com \
--sshlogin server2.example.net echo
If the login username is I<foo> on I<server2.example.net> use:
seq 10 | parallel --sshlogin server.example.com \
--sshlogin foo@server2.example.net echo
If your list of hosts is I<server1-88.example.net> with login I<foo>:
seq 10 | parallel -Sfoo@server{1..88}.example.net echo
To distribute the commands to a list of computers, make a file
I<mycomputers> with all the computers:
server.example.com
foo@server2.example.com
server3.example.com
Then run:
seq 10 | parallel --sshloginfile mycomputers echo
To include the local computer add the special sshlogin ':' to the list:
server.example.com
foo@server2.example.com
server3.example.com
:
GNU B<parallel> will try to determine the number of CPU cores on each
of the remote computers, and run one job per CPU core - even if the
remote computers do not have the same number of CPU cores.
If the number of CPU cores on the remote computers is not identified
correctly the number of CPU cores can be added in front. Here the
computer has 8 CPU cores.
seq 10 | parallel --sshlogin 8/server.example.com echo
=head1 EXAMPLE: Transferring of files
To recompress gzipped files with B<bzip2> using a remote computer run:
find logs/ -name '*.gz' | \
parallel --sshlogin server.example.com \
--transfer "zcat {} | bzip2 -9 >{.}.bz2"
This will list the .gz-files in the I<logs> directory and all
directories below. Then it will transfer the files to
I<server.example.com> to the corresponding directory in
I<$HOME/logs>. On I<server.example.com> the file will be recompressed
using B<zcat> and B<bzip2> resulting in the corresponding file with
I<.gz> replaced with I<.bz2>.
If you want the resulting bz2-file to be transferred back to the local
computer add I<--return {.}.bz2>:
find logs/ -name '*.gz' | \
parallel --sshlogin server.example.com \
--transfer --return {.}.bz2 "zcat {} | bzip2 -9 >{.}.bz2"
After the recompressing is done the I<.bz2>-file is transferred back to
the local computer and put next to the original I<.gz>-file.
If you want to delete the transferred files on the remote computer add
I<--cleanup>. This will remove both the file transferred to the remote
computer and the files transferred from the remote computer:
find logs/ -name '*.gz' | \
parallel --sshlogin server.example.com \
--transfer --return {.}.bz2 --cleanup "zcat {} | bzip2 -9 >{.}.bz2"
If you want run on several computers add the computers to I<--sshlogin>
either using ',' or multiple I<--sshlogin>:
find logs/ -name '*.gz' | \
parallel --sshlogin server.example.com,server2.example.com \
--sshlogin server3.example.com \
--transfer --return {.}.bz2 --cleanup "zcat {} | bzip2 -9 >{.}.bz2"
You can add the local computer using I<--sshlogin :>. This will disable the
removing and transferring for the local computer only:
find logs/ -name '*.gz' | \
parallel --sshlogin server.example.com,server2.example.com \
--sshlogin server3.example.com \
--sshlogin : \
--transfer --return {.}.bz2 --cleanup "zcat {} | bzip2 -9 >{.}.bz2"
Often I<--transfer>, I<--return> and I<--cleanup> are used together. They can be
shortened to I<--trc>:
find logs/ -name '*.gz' | \
parallel --sshlogin server.example.com,server2.example.com \
--sshlogin server3.example.com \
--sshlogin : \
--trc {.}.bz2 "zcat {} | bzip2 -9 >{.}.bz2"
With the file I<mycomputers> containing the list of computers it becomes:
find logs/ -name '*.gz' | parallel --sshloginfile mycomputers \
--trc {.}.bz2 "zcat {} | bzip2 -9 >{.}.bz2"
If the file I<~/.parallel/sshloginfile> contains the list of computers
the special short hand I<-S ..> can be used:
find logs/ -name '*.gz' | parallel -S .. \
--trc {.}.bz2 "zcat {} | bzip2 -9 >{.}.bz2"
=head1 EXAMPLE: Distributing work to local and remote computers
Convert *.mp3 to *.ogg running one process per CPU core on local computer and server2:
parallel --trc {.}.ogg -S server2,: \
'mpg321 -w - {} | oggenc -q0 - -o {.}.ogg' ::: *.mp3
=head1 EXAMPLE: Running the same command on remote computers
To run the command B<uptime> on remote computers you can do:
parallel --tag --nonall -S server1,server2 uptime
B<--nonall> reads no arguments. If you have a list of jobs you want
to run on each computer you can do:
parallel --tag --onall -S server1,server2 echo ::: 1 2 3
Remove B<--tag> if you do not want the sshlogin added before the
output.
If you have a lot of hosts use '-j0' to access more hosts in parallel.
=head1 EXAMPLE: Using remote computers behind NAT wall
If the workers are behind a NAT wall, you need some trickery to get to
them.
If you can B<ssh> to a jumphost, and reach the workers from there,
then the obvious solution would be this, but it B<does not work>:
parallel --ssh 'ssh jumphost ssh' -S host1 echo ::: DOES NOT WORK
It does not work because the command is dequoted by B<ssh> twice where
as GNU B<parallel> only expects it to be dequoted once.
So instead put this in B<~/.ssh/config>:
Host host1 host2 host3
ProxyCommand ssh jumphost.domain nc -w 1 %h 22
It requires B<nc(netcat)> to be installed on jumphost. With this you
can simply:
parallel -S host1,host2,host3 echo ::: This does work
=head2 No jumphost, but port forwards
If there is no jumphost but each server has port 22 forwarded from the
firewall (e.g. the firewall's port 22001 = port 22 on host1, 22002 = host2,
22003 = host3) then you can use B<~/.ssh/config>:
Host host1.v
Port 22001
Host host2.v
Port 22002
Host host3.v
Port 22003
Host *.v
Hostname firewall
And then use host{1..3}.v as normal hosts:
parallel -S host1.v,host2.v,host3.v echo ::: a b c
=head2 No jumphost, no port forwards
If ports cannot be forwarded, you need some sort of VPN to traverse
the NAT-wall. TOR is one options for that, as it is very easy to get
working.
You need to install TOR and setup a hidden service. In B<torrc> put:
HiddenServiceDir /var/lib/tor/hidden_service/
HiddenServicePort 22 127.0.0.1:22
Then start TOR: B</etc/init.d/tor restart>
The TOR hostname is now in B</var/lib/tor/hidden_service/hostname> and
is something similar to B<izjafdceobowklhz.onion>. Now you simply
prepend B<torsocks> to B<ssh>:
parallel --ssh 'torsocks ssh' -S izjafdceobowklhz.onion \
-S zfcdaeiojoklbwhz.onion,auclucjzobowklhi.onion echo ::: a b c
If not all hosts are accessible through TOR:
parallel -S 'torsocks ssh izjafdceobowklhz.onion,host2,host3' \
echo ::: a b c
See more B<ssh> tricks on https://en.wikibooks.org/wiki/OpenSSH/Cookbook/Proxies_and_Jump_Hosts
=head1 EXAMPLE: Parallelizing rsync
B<rsync> is a great tool, but sometimes it will not fill up the
available bandwidth. This is often a problem when copying several big
files over high speed connections.
The following will start one B<rsync> per big file in I<src-dir> to
I<dest-dir> on the server I<fooserver>:
cd src-dir; find . -type f -size +100000 | \
parallel -v ssh fooserver mkdir -p /dest-dir/{//}\; \
rsync -s -Havessh {} fooserver:/dest-dir/{}
The dirs created may end up with wrong permissions and smaller files
are not being transferred. To fix those run B<rsync> a final time:
rsync -Havessh src-dir/ fooserver:/dest-dir/
If you are unable to push data, but need to pull them and the files
are called digits.png (e.g. 000000.png) you might be able to do:
seq -w 0 99 | parallel rsync -Havessh fooserver:src/*{}.png destdir/
=head1 EXAMPLE: Use multiple inputs in one command
Copy files like foo.es.ext to foo.ext:
ls *.es.* | perl -pe 'print; s/\.es//' | parallel -N2 cp {1} {2}
The perl command spits out 2 lines for each input. GNU B<parallel>
takes 2 inputs (using B<-N2>) and replaces {1} and {2} with the inputs.
Count in binary:
parallel -k echo ::: 0 1 ::: 0 1 ::: 0 1 ::: 0 1 ::: 0 1 ::: 0 1
Print the number on the opposing sides of a six sided die:
parallel --link -a <(seq 6) -a <(seq 6 -1 1) echo
parallel --link echo :::: <(seq 6) <(seq 6 -1 1)
Convert files from all subdirs to PNG-files with consecutive numbers
(useful for making input PNG's for B<ffmpeg>):
parallel --link -a <(find . -type f | sort) \
-a <(seq $(find . -type f|wc -l)) convert {1} {2}.png
Alternative version:
find . -type f | sort | parallel convert {} {#}.png
=head1 EXAMPLE: Use a table as input
Content of table_file.tsv:
foo<TAB>bar
baz <TAB> quux
To run:
cmd -o bar -i foo
cmd -o quux -i baz
you can run:
parallel -a table_file.tsv --colsep '\t' cmd -o {2} -i {1}
Note: The default for GNU B<parallel> is to remove the spaces around
the columns. To keep the spaces:
parallel -a table_file.tsv --trim n --colsep '\t' cmd -o {2} -i {1}
=head1 EXAMPLE: Output to database
GNU B<parallel> can output to a database table and a CSV-file:
DBURL=csv:///%2Ftmp%2Fmy.csv
DBTABLEURL=$DBURL/mytable
parallel --sqlandworker $DBTABLEURL seq ::: {1..10}
It is rather slow and takes up a lot of CPU time because GNU
B<parallel> parses the whole CSV file for each update.
A better approach is to use an SQLite-base and then convert that to CSV:
DBURL=sqlite3:///%2Ftmp%2Fmy.sqlite
DBTABLEURL=$DBURL/mytable
parallel --sqlandworker $DBTABLEURL seq ::: {1..10}
sql $DBURL '.headers on' '.mode csv' 'SELECT * FROM mytable;'
This takes around a second per job.
If you have access to a real database system, such as PostgreSQL, it
is even faster:
DBURL=pg://user:pass@host/mydb
DBTABLEURL=$DBURL/mytable
parallel --sqlandworker $DBTABLEURL seq ::: {1..10}
sql $DBURL "COPY (SELECT * FROM mytable) TO stdout DELIMITER ',' CSV HEADER;"
Or MySQL:
DBURL=mysql://user:pass@host/mydb
DBTABLEURL=$DBURL/mytable
parallel --sqlandworker $DBTABLEURL seq ::: {1..10}
sql -p -B $DBURL "SELECT * FROM mytable;" > mytable.tsv
perl -pe 's/"/""/g; s/\t/","/g; s/^/"/; s/$/"/; s/\\\\/\\/g;
s/\\t/\t/g; s/\\n/\n/g;' mytable.tsv
=head1 EXAMPLE: Output to CSV-file for R
If you have no need for the advanced job distribution control that a
database provides, but you simply want output into a CSV file that you
can read into R or LibreCalc, then you can use B<--results>:
parallel --results my.csv seq ::: 10 20 30
R
> mydf <- read.csv("my.csv");
> print(mydf[2,])
> write(as.character(mydf[2,c("Stdout")]),'')
=head1 EXAMPLE: Use XML as input
The show Aflyttet on Radio 24syv publishes an RSS feed with their audio
podcasts on: http://arkiv.radio24syv.dk/audiopodcast/channel/4466232
Using B<xpath> you can extract the URLs for 2016 and download them
using GNU B<parallel>:
wget -O - http://arkiv.radio24syv.dk/audiopodcast/channel/4466232 |
xpath -e "//ancestor::pubDate[contains(text(),'2016')]/../enclosure/@url" |
parallel -u wget '{= s/ url="//; s/"//; =}'
=head1 EXAMPLE: Run the same command 10 times
If you want to run the same command with the same arguments 10 times
in parallel you can do:
seq 10 | parallel -n0 my_command my_args
=head1 EXAMPLE: Working as cat | sh. Resource inexpensive jobs and evaluation
GNU B<parallel> can work similar to B<cat | sh>.
A resource inexpensive job is a job that takes very little CPU, disk
I/O and network I/O. Ping is an example of a resource inexpensive
job. wget is too - if the webpages are small.
The content of the file jobs_to_run:
ping -c 1 10.0.0.1
wget http://example.com/status.cgi?ip=10.0.0.1
ping -c 1 10.0.0.2
wget http://example.com/status.cgi?ip=10.0.0.2
...
ping -c 1 10.0.0.255
wget http://example.com/status.cgi?ip=10.0.0.255
To run 100 processes simultaneously do:
parallel -j 100 < jobs_to_run
As there is not a I<command> the jobs will be evaluated by the shell.
=head1 EXAMPLE: Processing a big file using more cores
To process a big file or some output you can use B<--pipe> to split up
the data into blocks and pipe the blocks into the processing program.
If the program is B<gzip -9> you can do:
cat bigfile | parallel --pipe --recend '' -k gzip -9 > bigfile.gz
This will split B<bigfile> into blocks of 1 MB and pass that to B<gzip
-9> in parallel. One B<gzip> will be run per CPU core. The output of
B<gzip -9> will be kept in order and saved to B<bigfile.gz>
B<gzip> works fine if the output is appended, but some processing does
not work like that - for example sorting. For this GNU B<parallel> can
put the output of each command into a file. This will sort a big file
in parallel:
cat bigfile | parallel --pipe --files sort |\
parallel -Xj1 sort -m {} ';' rm {} >bigfile.sort
Here B<bigfile> is split into blocks of around 1MB, each block ending
in '\n' (which is the default for B<--recend>). Each block is passed
to B<sort> and the output from B<sort> is saved into files. These
files are passed to the second B<parallel> that runs B<sort -m> on the
files before it removes the files. The output is saved to
B<bigfile.sort>.
GNU B<parallel>'s B<--pipe> maxes out at around 100 MB/s because every
byte has to be copied through GNU B<parallel>. But if B<bigfile> is a
real (seekable) file GNU B<parallel> can by-pass the copying and send
the parts directly to the program:
parallel --pipepart --block 100m -a bigfile --files sort |\
parallel -Xj1 sort -m {} ';' rm {} >bigfile.sort
=head1 EXAMPLE: Grouping input lines
When processing with B<--pipe> you may have lines grouped by a
value. Here is I<my.csv>:
Transaction Customer Item
1 a 53
2 b 65
3 b 82
4 c 96
5 c 67
6 c 13
7 d 90
8 d 43
9 d 91
10 d 84
11 e 72
12 e 102
13 e 63
14 e 56
15 e 74
Let us assume you want GNU B<parallel> to process each customer. In
other words: You want all the transactions for a single customer to be
treated as a single record.
To do this we preprocess the data with a program that inserts a record
separator before each customer (column 2 = $F[1]). Here we first make
a 50 character random string, which we then use as the separator:
sep=`perl -e 'print map { ("a".."z","A".."Z")[rand(52)] } (1..50);'`
cat my.csv | perl -ape '$F[1] ne $l and print "'$sep'"; $l = $F[1]' |
parallel --recend $sep --rrs --pipe -N1 wc
If your program can process multiple customers replace B<-N1> with a
reasonable B<--blocksize>.
=head1 EXAMPLE: Running more than 250 jobs workaround
If you need to run a massive amount of jobs in parallel, then you will
likely hit the filehandle limit which is often around 250 jobs. If you
are super user you can raise the limit in /etc/security/limits.conf
but you can also use this workaround. The filehandle limit is per
process. That means that if you just spawn more GNU B<parallel>s then
each of them can run 250 jobs. This will spawn up to 2500 jobs:
cat myinput |\
parallel --pipe -N 50 --round-robin -j50 parallel -j50 your_prg
This will spawn up to 62500 jobs (use with caution - you need 64 GB
RAM to do this, and you may need to increase /proc/sys/kernel/pid_max):
cat myinput |\
parallel --pipe -N 250 --round-robin -j250 parallel -j250 your_prg
=head1 EXAMPLE: Working as mutex and counting semaphore
The command B<sem> is an alias for B<parallel --semaphore>.
A counting semaphore will allow a given number of jobs to be started
in the background. When the number of jobs are running in the
background, GNU B<sem> will wait for one of these to complete before
starting another command. B<sem --wait> will wait for all jobs to
complete.
Run 10 jobs concurrently in the background:
for i in *.log ; do
echo $i
sem -j10 gzip $i ";" echo done
done
sem --wait
A mutex is a counting semaphore allowing only one job to run. This
will edit the file I<myfile> and prepends the file with lines with the
numbers 1 to 3.
seq 3 | parallel sem sed -i -e '1i{}' myfile
As I<myfile> can be very big it is important only one process edits
the file at the same time.
Name the semaphore to have multiple different semaphores active at the
same time:
seq 3 | parallel sem --id mymutex sed -i -e '1i{}' myfile
=head1 EXAMPLE: Mutex for a script
Assume a script is called from cron or from a web service, but only
one instance can be run at a time. With B<sem> and B<--shebang-wrap>
the script can be made to wait for other instances to finish. Here in
B<bash>:
#!/usr/bin/sem --shebang-wrap -u --id $0 --fg /bin/bash
echo This will run
sleep 5
echo exclusively
Here B<perl>:
#!/usr/bin/sem --shebang-wrap -u --id $0 --fg /usr/bin/perl
print "This will run ";
sleep 5;
print "exclusively\n";
Here B<python>:
#!/usr/local/bin/sem --shebang-wrap -u --id $0 --fg /usr/bin/python
import time
print "This will run ";
time.sleep(5)
print "exclusively";
=head1 EXAMPLE: Start editor with filenames from stdin (standard input)
You can use GNU B<parallel> to start interactive programs like emacs or vi:
cat filelist | parallel --tty -X emacs
cat filelist | parallel --tty -X vi
If there are more files than will fit on a single command line, the
editor will be started again with the remaining files.
=head1 EXAMPLE: Running sudo
B<sudo> requires a password to run a command as root. It caches the
access, so you only need to enter the password again if you have not
used B<sudo> for a while.
The command:
parallel sudo echo ::: This is a bad idea
is no good, as you would be prompted for the sudo password for each of
the jobs. You can either do:
sudo echo This
parallel sudo echo ::: is a good idea
or:
sudo parallel echo ::: This is a good idea
This way you only have to enter the sudo password once.
=head1 EXAMPLE: GNU Parallel as queue system/batch manager
GNU B<parallel> can work as a simple job queue system or batch manager.
The idea is to put the jobs into a file and have GNU B<parallel> read
from that continuously. As GNU B<parallel> will stop at end of file we
use B<tail> to continue reading:
true >jobqueue; tail -n+0 -f jobqueue | parallel
To submit your jobs to the queue:
echo my_command my_arg >> jobqueue
You can of course use B<-S> to distribute the jobs to remote
computers:
true >jobqueue; tail -n+0 -f jobqueue | parallel -S ..
If you keep this running for a long time, jobqueue will grow. A way of
removing the jobs already run is by making GNU B<parallel> stop when
it hits a special value and then restart. To use B<--eof> to make GNU
B<parallel> exit, B<tail> also needs to be forced to exit:
true >jobqueue;
while true; do
tail -n+0 -f jobqueue |
(parallel -E StOpHeRe -S ..; echo GNU Parallel is now done;
perl -e 'while(<>){/StOpHeRe/ and last};print <>' jobqueue > j2;
(seq 1000 >> jobqueue &);
echo Done appending dummy data forcing tail to exit)
echo tail exited;
mv j2 jobqueue
done
In some cases you can run on more CPUs and computers during the night:
# Day time
echo 50% > jobfile
cp day_server_list ~/.parallel/sshloginfile
# Night time
echo 100% > jobfile
cp night_server_list ~/.parallel/sshloginfile
tail -n+0 -f jobqueue | parallel --jobs jobfile -S ..
GNU Parallel discovers if B<jobfile> or B<~/.parallel/sshloginfile>
changes.
There is a a small issue when using GNU B<parallel> as queue
system/batch manager: You have to submit JobSlot number of jobs before
they will start, and after that you can submit one at a time, and job
will start immediately if free slots are available. Output from the
running or completed jobs are held back and will only be printed when
JobSlots more jobs has been started (unless you use --ungroup or
--line-buffer, in which case the output from the jobs are printed
immediately). E.g. if you have 10 jobslots then the output from the
first completed job will only be printed when job 11 has started, and
the output of second completed job will only be printed when job 12
has started.
=head1 EXAMPLE: GNU Parallel as dir processor
If you have a dir in which users drop files that needs to be processed
you can do this on GNU/Linux (If you know what B<inotifywait> is
called on other platforms file a bug report):
inotifywait -qmre MOVED_TO -e CLOSE_WRITE --format %w%f my_dir |\
parallel -u echo
This will run the command B<echo> on each file put into B<my_dir> or
subdirs of B<my_dir>.
You can of course use B<-S> to distribute the jobs to remote
computers:
inotifywait -qmre MOVED_TO -e CLOSE_WRITE --format %w%f my_dir |\
parallel -S .. -u echo
If the files to be processed are in a tar file then unpacking one file
and processing it immediately may be faster than first unpacking all
files. Set up the dir processor as above and unpack into the dir.
Using GNU Parallel as dir processor has the same limitations as using
GNU Parallel as queue system/batch manager.
=head1 EXAMPLE: Locate the missing package
If you have downloaded source and tried compiling it, you may have seen:
$ ./configure
[...]
checking for something.h... no
configure: error: "libsomething not found"
Often it is not obvious which package you should install to get that
file. Debian has `apt-file` to search for a file. `tracefile` from
https://gitlab.com/ole.tange/tangetools can tell which files a program
tried to access. In this case we are interested in one of the last
files:
$ tracefile -un ./configure | tail | parallel -j0 apt-file search
=head1 QUOTING
GNU B<parallel> is very liberal in quoting. You only need to quote
characters that have special meaning in shell:
( ) $ ` ' " < > ; | \
and depending on context these needs to be quoted, too:
~ & # ! ? space * {
Therefore most people will never need more quoting than putting '\'
in front of the special characters.
Often you can simply put \' around every ':
perl -ne '/^\S+\s+\S+$/ and print $ARGV,"\n"' file
can be quoted:
parallel perl -ne \''/^\S+\s+\S+$/ and print $ARGV,"\n"'\' ::: file
However, when you want to use a shell variable you need to quote the
$-sign. Here is an example using $PARALLEL_SEQ. This variable is set
by GNU B<parallel> itself, so the evaluation of the $ must be done by
the sub shell started by GNU B<parallel>:
seq 10 | parallel -N2 echo seq:\$PARALLEL_SEQ arg1:{1} arg2:{2}
If the variable is set before GNU B<parallel> starts you can do this:
VAR=this_is_set_before_starting
echo test | parallel echo {} $VAR
Prints: B<test this_is_set_before_starting>
It is a little more tricky if the variable contains more than one space in a row:
VAR="two spaces between each word"
echo test | parallel echo {} \'"$VAR"\'
Prints: B<test two spaces between each word>
If the variable should not be evaluated by the shell starting GNU
B<parallel> but be evaluated by the sub shell started by GNU
B<parallel>, then you need to quote it:
echo test | parallel VAR=this_is_set_after_starting \; echo {} \$VAR
Prints: B<test this_is_set_after_starting>
It is a little more tricky if the variable contains space:
echo test |\
parallel VAR='"two spaces between each word"' echo {} \'"$VAR"\'
Prints: B<test two spaces between each word>
$$ is the shell variable containing the process id of the shell. This
will print the process id of the shell running GNU B<parallel>:
seq 10 | parallel echo $$
And this will print the process ids of the sub shells started by GNU
B<parallel>.
seq 10 | parallel echo \$\$
If the special characters should not be evaluated by the sub shell
then you need to protect it against evaluation from both the shell
starting GNU B<parallel> and the sub shell:
echo test | parallel echo {} \\\$VAR
Prints: B<test $VAR>
GNU B<parallel> can protect against evaluation by the sub shell by
using -q:
echo test | parallel -q echo {} \$VAR
Prints: B<test $VAR>
This is particularly useful if you have lots of quoting. If you want
to run a perl script like this:
perl -ne '/^\S+\s+\S+$/ and print $ARGV,"\n"' file
It needs to be quoted like one of these:
ls | parallel perl -ne '/^\\S+\\s+\\S+\$/\ and\ print\ \$ARGV,\"\\n\"'
ls | parallel perl -ne \''/^\S+\s+\S+$/ and print $ARGV,"\n"'\'
Notice how spaces, \'s, "'s, and $'s need to be quoted. GNU B<parallel>
can do the quoting by using option -q:
ls | parallel -q perl -ne '/^\S+\s+\S+$/ and print $ARGV,"\n"'
However, this means you cannot make the sub shell interpret special
characters. For example because of B<-q> this WILL NOT WORK:
ls *.gz | parallel -q "zcat {} >{.}"
ls *.gz | parallel -q "zcat {} | bzip2 >{.}.bz2"
because > and | need to be interpreted by the sub shell.
If you get errors like:
sh: -c: line 0: syntax error near unexpected token
sh: Syntax error: Unterminated quoted string
sh: -c: line 0: unexpected EOF while looking for matching `''
sh: -c: line 1: syntax error: unexpected end of file
zsh:1: no matches found:
then you might try using B<-q>.
If you are using B<bash> process substitution like B<<(cat foo)> then
you may try B<-q> and prepending I<command> with B<bash -c>:
ls | parallel -q bash -c 'wc -c <(echo {})'
Or for substituting output:
ls | parallel -q bash -c \
'tar c {} | tee >(gzip >{}.tar.gz) | bzip2 >{}.tar.bz2'
B<Conclusion>: To avoid dealing with the quoting problems it may be
easier just to write a small script or a function (remember to
B<export -f> the function) and have GNU B<parallel> call that.
=head1 LIST RUNNING JOBS
If you want a list of the jobs currently running you can run:
killall -USR1 parallel
GNU B<parallel> will then print the currently running jobs on stderr
(standard error).
=head1 COMPLETE RUNNING JOBS BUT DO NOT START NEW JOBS
If you regret starting a lot of jobs you can simply break GNU B<parallel>,
but if you want to make sure you do not have half-completed jobs you
should send the signal B<SIGTERM> to GNU B<parallel>:
killall -TERM parallel
This will tell GNU B<parallel> to not start any new jobs, but wait until
the currently running jobs are finished before exiting.
=head1 ENVIRONMENT VARIABLES
=over 9
=item $PARALLEL_HOME
Dir where GNU B<parallel> stores config files, semaphores, and caches
information between invocations. Default: $HOME/.parallel.
=item $PARALLEL_PID
The environment variable $PARALLEL_PID is set by GNU B<parallel> and
is visible to the jobs started from GNU B<parallel>. This makes it
possible for the jobs to communicate directly to GNU B<parallel>.
Remember to quote the $, so it gets evaluated by the correct
shell.
B<Example:> If each of the jobs tests a solution and one of jobs finds
the solution the job can tell GNU B<parallel> not to start more jobs
by: B<kill -TERM $PARALLEL_PID>. This only works on the local
computer.
=item $PARALLEL_RSYNC_OPTS
Options to pass on to B<rsync>. Defaults to: -rlDzR.
=item $PARALLEL_SHELL
Use this shell for the commands run by GNU Parallel:
=over 2
=item *
$PARALLEL_SHELL. If undefined use:
=item *
The shell that started GNU Parallel. If that cannot be determined:
=item *
$SHELL. If undefined use:
=item *
/bin/sh
=back
=item $PARALLEL_SSH
GNU B<parallel> defaults to using B<ssh> for remote access. This can
be overridden with $PARALLEL_SSH, which again can be overridden with
B<--ssh>. It can also be set on a per server basis (see
B<--sshlogin>).
=item $PARALLEL_SEQ
$PARALLEL_SEQ will be set to the sequence number of the job
running. Remember to quote the $, so it gets evaluated by the correct
shell.
B<Example:>
seq 10 | parallel -N2 \
echo seq:'$'PARALLEL_SEQ arg1:{1} arg2:{2}
=item $PARALLEL_TMUX
Path to B<tmux>. If unset the B<tmux> in $PATH is used.
=item $TMPDIR
Directory for temporary files. See: B<--tmpdir>.
=item $PARALLEL
The environment variable $PARALLEL will be used as default options for
GNU B<parallel>. If the variable contains special shell characters
(e.g. $, *, or space) then these need to be to be escaped with \.
B<Example:>
cat list | parallel -j1 -k -v ls
cat list | parallel -j1 -k -v -S"myssh user@server" ls
can be written as:
cat list | PARALLEL="-kvj1" parallel ls
cat list | PARALLEL='-kvj1 -S myssh\ user@server' \
parallel echo
Notice the \ in the middle is needed because 'myssh' and 'user@server'
must be one argument.
=back
=head1 DEFAULT PROFILE (CONFIG FILE)
The global configuration file /etc/parallel/config, followed by user
configuration file ~/.parallel/config (formerly known as .parallelrc)
will be read in turn if they exist. Lines starting with '#' will be
ignored. The format can follow that of the environment variable
$PARALLEL, but it is often easier to simply put each option on its own
line.
Options on the command line take precedence, followed by the
environment variable $PARALLEL, user configuration file
~/.parallel/config, and finally the global configuration file
/etc/parallel/config.
Note that no file that is read for options, nor the environment
variable $PARALLEL, may contain retired options such as B<--tollef>.
=head1 PROFILE FILES
If B<--profile> set, GNU B<parallel> will read the profile from that
file rather than the global or user configuration files. You can have
multiple B<--profiles>.
Example: Profile for running a command on every sshlogin in
~/.ssh/sshlogins and prepend the output with the sshlogin:
echo --tag -S .. --nonall > ~/.parallel/n
parallel -Jn uptime
Example: Profile for running every command with B<-j-1> and B<nice>
echo -j-1 nice > ~/.parallel/nice_profile
parallel -J nice_profile bzip2 -9 ::: *
Example: Profile for running a perl script before every command:
echo "perl -e '\$a=\$\$; print \$a,\" \",'\$PARALLEL_SEQ',\" \";';" \
> ~/.parallel/pre_perl
parallel -J pre_perl echo ::: *
Note how the $ and " need to be quoted using \.
Example: Profile for running distributed jobs with B<nice> on the
remote computers:
echo -S .. nice > ~/.parallel/dist
parallel -J dist --trc {.}.bz2 bzip2 -9 ::: *
=head1 EXIT STATUS
Exit status depends on B<--halt-on-error> if one of these is used:
success=X, success=Y%, fail=Y%.
=over 6
=item Z<>0
All jobs ran without error. If success=X is used: X jobs ran without
error. If success=Y% is used: Y% of the jobs ran without error.
=item Z<>1-100
Some of the jobs failed. The exit status gives the number of failed
jobs. If Y% is used the exit status is the percentage of jobs that
failed.
=item Z<>101
More than 100 jobs failed.
=item Z<>255
Other error.
=item Z<>-1 (In joblog and SQL table)
Killed by Ctrl-C, timeout, not enough memory or similar.
=item Z<>-2 (In joblog and SQL table)
skip() was called in B<{= =}>.
=item Z<>-1000 (In SQL table)
Job is ready to run (set by --sqlmaster).
=item Z<>-1220 (In SQL table)
Job is taken by worker (set by --sqlworker).
=back
If fail=1 is used, the exit status will be the exit status of the
failing job.
=head1 DIFFERENCES BETWEEN GNU Parallel AND ALTERNATIVES
See: B<man parallel_alternatives>
=head1 BUGS
=head2 Quoting of newline
Because of the way newline is quoted this will not work:
echo 1,2,3 | parallel -vkd, "echo 'a{}b'"
However, these will all work:
echo 1,2,3 | parallel -vkd, echo a{}b
echo 1,2,3 | parallel -vkd, "echo 'a'{}'b'"
echo 1,2,3 | parallel -vkd, "echo 'a'"{}"'b'"
=head2 Speed
=head3 Startup
GNU B<parallel> is slow at starting up - around 250 ms the first time
and 150 ms after that.
=head3 Job startup
Starting a job on the local machine takes around 10 ms. This can be a
big overhead if the job takes very few ms to run. Often you can group
small jobs together using B<-X> which will make the overhead less
significant. Or you can run multiple GNU B<parallel>s as described in
B<EXAMPLE: Speeding up fast jobs>.
=head3 SSH
When using multiple computers GNU B<parallel> opens B<ssh> connections
to them to figure out how many connections can be used reliably
simultaneously (Namely SSHD's MaxStartups). This test is done for each
host in serial, so if your B<--sshloginfile> contains many hosts it may
be slow.
If your jobs are short you may see that there are fewer jobs running
on the remote systems than expected. This is due to time spent logging
in and out. B<-M> may help here.
=head3 Disk access
A single disk can normally read data faster if it reads one file at a
time instead of reading a lot of files in parallel, as this will avoid
disk seeks. However, newer disk systems with multiple drives can read
faster if reading from multiple files in parallel.
If the jobs are of the form read-all-compute-all-write-all, so
everything is read before anything is written, it may be faster to
force only one disk access at the time:
sem --id diskio cat file | compute | sem --id diskio cat > file
If the jobs are of the form read-compute-write, so writing starts
before all reading is done, it may be faster to force only one reader
and writer at the time:
sem --id read cat file | compute | sem --id write cat > file
If the jobs are of the form read-compute-read-compute, it may be
faster to run more jobs in parallel than the system has CPUs, as some
of the jobs will be stuck waiting for disk access.
=head2 --nice limits command length
The current implementation of B<--nice> is too pessimistic in the max
allowed command length. It only uses a little more than half of what
it could. This affects B<-X> and B<-m>. If this becomes a real problem for
you, file a bug-report.
=head2 Aliases and functions do not work
If you get:
Can't exec "command": No such file or directory
or:
open3: exec of by command failed
or:
/bin/bash: command: command not found
it may be because I<command> is not known, but it could also be
because I<command> is an alias or a function. If it is a function you
need to B<export -f> the function first or use B<env_parallel>. An
alias will only work if you use B<env_parallel>.
=head2 Database with MySQL fails randomly
The B<--sql*> options may fail randomly with MySQL. This problem does
not exist with PostgreSQL.
=head1 REPORTING BUGS
Report bugs to <bug-parallel@gnu.org> or
https://savannah.gnu.org/bugs/?func=additem&group=parallel
See a perfect bug report on
https://lists.gnu.org/archive/html/bug-parallel/2015-01/msg00000.html
Your bug report should always include:
=over 2
=item *
The error message you get (if any). If the error message is not from
GNU B<parallel> you need to show why you think GNU B<parallel> caused
these.
=item *
The complete output of B<parallel --version>. If you are not running
the latest released version (see http://ftp.gnu.org/gnu/parallel/) you
should specify why you believe the problem is not fixed in that
version.
=item *
A minimal, complete, and verifiable example (See description on
http://stackoverflow.com/help/mcve).
It should be a complete example that others can run that shows the problem
including all files needed to run the example. This should preferably
be small and simple, so try to remove as many options as possible. A
combination of B<yes>, B<seq>, B<cat>, B<echo>, and B<sleep> can
reproduce most errors. If your example requires large files, see if
you can make them by something like B<seq 1000000> > B<file> or B<yes
| head -n 10000000> > B<file>.
If your example requires remote execution, see if you can use
B<localhost> - maybe using another login.
If you have access to a different system, test if the MCVE shows the
problem on that system.
=item *
The output of your example. If your problem is not easily reproduced
by others, the output might help them figure out the problem.
=item *
Whether you have watched the intro videos
(http://www.youtube.com/playlist?list=PL284C9FF2488BC6D1), walked
through the tutorial (man parallel_tutorial), and read the EXAMPLE
section in the man page (man parallel - search for EXAMPLE:).
=back
If you suspect the error is dependent on your environment or
distribution, please see if you can reproduce the error on one of
these VirtualBox images:
http://sourceforge.net/projects/virtualboximage/files/
http://www.osboxes.org/virtualbox-images/
Specifying the name of your distribution is not enough as you may have
installed software that is not in the VirtualBox images.
If you cannot reproduce the error on any of the VirtualBox images
above, see if you can build a VirtualBox image on which you can
reproduce the error. If not you should assume the debugging will be
done through you. That will put more burden on you and it is extra
important you give any information that help. In general the problem
will be fixed faster and with less work for you if you can reproduce
the error on a VirtualBox.
=head1 AUTHOR
When using GNU B<parallel> for a publication please cite:
O. Tange (2011): GNU Parallel - The Command-Line Power Tool, ;login:
The USENIX Magazine, February 2011:42-47.
This helps funding further development; and it won't cost you a cent.
If you pay 10000 EUR you should feel free to use GNU Parallel without citing.
Copyright (C) 2007-10-18 Ole Tange, http://ole.tange.dk
Copyright (C) 2008,2009,2010 Ole Tange, http://ole.tange.dk
Copyright (C) 2010,2011,2012,2013,2014,2015,2016,2017,2018 Ole Tange,
http://ole.tange.dk and Free Software Foundation, Inc.
Parts of the manual concerning B<xargs> compatibility is inspired by
the manual of B<xargs> from GNU findutils 4.4.2.
=head1 LICENSE
Copyright (C)
2007,2008,2009,2010,2011,2012,2013,2014,2015,2016,2017,2018 Free
Software Foundation, Inc.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 3 of the License, or
at your option any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
=head2 Documentation license I
Permission is granted to copy, distribute and/or modify this documentation
under the terms of the GNU Free Documentation License, Version 1.3 or
any later version published by the Free Software Foundation; with no
Invariant Sections, with no Front-Cover Texts, and with no Back-Cover
Texts. A copy of the license is included in the file fdl.txt.
=head2 Documentation license II
You are free:
=over 9
=item B<to Share>
to copy, distribute and transmit the work
=item B<to Remix>
to adapt the work
=back
Under the following conditions:
=over 9
=item B<Attribution>
You must attribute the work in the manner specified by the author or
licensor (but not in any way that suggests that they endorse you or
your use of the work).
=item B<Share Alike>
If you alter, transform, or build upon this work, you may distribute
the resulting work only under the same, similar or a compatible
license.
=back
With the understanding that:
=over 9
=item B<Waiver>
Any of the above conditions can be waived if you get permission from
the copyright holder.
=item B<Public Domain>
Where the work or any of its elements is in the public domain under
applicable law, that status is in no way affected by the license.
=item B<Other Rights>
In no way are any of the following rights affected by the license:
=over 2
=item *
Your fair dealing or fair use rights, or other applicable
copyright exceptions and limitations;
=item *
The author's moral rights;
=item *
Rights other persons may have either in the work itself or in
how the work is used, such as publicity or privacy rights.
=back
=back
=over 9
=item B<Notice>
For any reuse or distribution, you must make clear to others the
license terms of this work.
=back
A copy of the full license is included in the file as cc-by-sa.txt.
=head1 DEPENDENCIES
GNU B<parallel> uses Perl, and the Perl modules Getopt::Long,
IPC::Open3, Symbol, IO::File, POSIX, and File::Temp. For remote usage
it also uses rsync with ssh.
=head1 SEE ALSO
B<ssh>(1), B<ssh-agent>(1), B<sshpass>(1), B<ssh-copy-id>(1),
B<rsync>(1), B<find>(1), B<xargs>(1), B<dirname>(1), B<make>(1),
B<pexec>(1), B<ppss>(1), B<xjobs>(1), B<prll>(1), B<dxargs>(1),
B<mdm>(1)
=cut
Reference in a new issue View git blame Copy permalink