Backup GNU Parallel
Go to file
2024-07-21 05:21:21 +02:00
.reuse src/pod2rst-fix: Default syntax langague in POD = bash. 2024-06-27 13:43:58 +02:00
doc Released as 20240722 ('Assange') 2024-07-21 05:21:21 +02:00
LICENSES https://reuse.software/ compliant. 2021-04-25 00:14:51 +02:00
packager Released as 20240722 ('Assange') 2024-07-21 05:21:21 +02:00
src Released as 20240722 ('Assange') 2024-07-21 05:21:21 +02:00
testsuite Released as 20240722 ('Assange') 2024-07-21 05:21:21 +02:00
.gitignore parallel: Fixed bug #60579: Sem: Allow reading from stdin and setting -a. 2021-12-26 23:29:28 +01:00
10seconds_install 10seconds_install: Updated to 64 bit GnuPG IDs. 2023-02-27 00:55:13 +01:00
aclocal.m4 Released as 20220522 ('NATO') 2022-05-22 13:18:02 +02:00
bootstrap parallel: Fixed bug #60579: Sem: Allow reading from stdin and setting -a. 2021-12-26 23:29:28 +01:00
CITATION parallel: Fixed bug #60579: Sem: Allow reading from stdin and setting -a. 2021-12-26 23:29:28 +01:00
CITATION.cff parallel: Fixed bug #60579: Sem: Allow reading from stdin and setting -a. 2021-12-26 23:29:28 +01:00
config.h.in Implemented automake 2010-04-18 16:18:31 +02:00
configure Released as 20240722 ('Assange') 2024-07-21 05:21:21 +02:00
configure.ac Released as 20240722 ('Assange') 2024-07-21 05:21:21 +02:00
CREDITS parallel: Basic --completion implemented for zsh. 2022-04-01 01:23:04 +02:00
install-sh Released as 20220622 ('Bongbong') 2022-06-22 22:32:57 +08:00
Makefile.am Released as 20240622 ('34 counts') 2024-06-24 20:57:21 +02:00
Makefile.in Released as 20240622 ('34 counts') 2024-06-24 20:57:21 +02:00
missing Released as 20220622 ('Bongbong') 2022-06-22 22:32:57 +08:00
NEWS Released as 20240722 ('Assange') 2024-07-21 05:21:21 +02:00
README Released as 20240722 ('Assange') 2024-07-21 05:21:21 +02:00

			     GNU Parallel

		https://www.gnu.org/software/parallel/


= Presentation of GNU Parallel =

GNU Parallel is a shell tool for executing jobs in parallel using one
or more computers. A job can be a single command or a small script
that has to be run for each of the lines in the input. The typical
input is a list of files, a list of hosts, a list of users, a list of
URLs, or a list of tables. A job can also be a command that reads from
a pipe. GNU Parallel can then split the input and pipe it into
commands in parallel.

If you use xargs and tee today you will find GNU Parallel very easy to
use as GNU Parallel is written to have the same options as xargs. If
you write loops in shell, you will find GNU Parallel may be able to
replace most of the loops and make them run faster by running several
jobs in parallel.

GNU Parallel makes sure output from the commands is the same output as
you would get had you run the commands sequentially. This makes it
possible to use output from GNU Parallel as input for other programs.

See the cheat sheet for examples that cover most of the daily usage:
www.gnu.org/s/parallel/parallel_cheat.pdf


= 10 seconds installation =

For security reasons it is recommended you use your package manager to
install. But if you cannot do that then you can use this 10 seconds
installation.

The 10 seconds installation will try to do a full installation; if
that fails, a personal installation; if that fails, a minimal
installation.

    $ (wget -O - pi.dk/3 || lynx -source pi.dk/3 || curl pi.dk/3/ || \
       fetch -o - http://pi.dk/3 ) > install.sh
    $ sha1sum install.sh | grep 51621b7f1ee103c00783aae4ef9889f8
    12345678 51621b7f 1ee103c0 0783aae4 ef9889f8
    $ md5sum install.sh | grep 62eada78703b5500241b8e50baf62758
    62eada78 703b5500 241b8e50 baf62758
    $ sha512sum install.sh | grep c0206a65dc86f2bb6bbdf1a2bc96bc6d067
    160d3159 9480cf5c a101512f 150b7ac0 206a65dc 86f2bb6b bdf1a2bc 96bc6d06
    7f8237c2 0964b67f bccf8a93 332528fa 11e5ab43 2a6226a6 ceb197ab 7f03c061
    $ bash install.sh

This will literally install faster than reading the rest of this
document.


= Full installation =

Full installation of GNU Parallel is as simple as:

    wget https://ftpmirror.gnu.org/parallel/parallel-20240722.tar.bz2
    wget https://ftpmirror.gnu.org/parallel/parallel-20240722.tar.bz2.sig
    gpg parallel-20240722.tar.bz2.sig
    bzip2 -dc parallel-20240722.tar.bz2 | tar xvf -
    cd parallel-20240722
    ./configure && make && sudo make install


= Personal installation =

If you are not root you can add ~/bin to your path and install in
~/bin and ~/share:

    wget https://ftpmirror.gnu.org/parallel/parallel-20240722.tar.bz2
    wget https://ftpmirror.gnu.org/parallel/parallel-20240722.tar.bz2.sig
    gpg parallel-20240722.tar.bz2.sig
    bzip2 -dc parallel-20240722.tar.bz2 | tar xvf -
    cd parallel-20240722
    ./configure --prefix=$HOME && make && make install

Or if your system lacks 'make' you can simply copy src/parallel
src/sem src/niceload src/sql to a dir in your path.


= Minimal installation =

If you just need parallel and do not have 'make' installed (maybe the
system is old or Microsoft Windows):

    wget https://git.savannah.gnu.org/cgit/parallel.git/plain/src/parallel
    chmod 755 parallel
    cp parallel sem
    mv parallel sem dir-in-your-$PATH/bin/


= Installation on compute servers =

If you are developing your script to run on a remote server, that does
not have GNU Parallel installed, but you have it installed on you
development machine, then you can use `parallel --embed`.

    parallel --embed > newscript.sh

Just edit the last lines of newscript.sh and copy it to the compute
server.


= Test the installation =

After this you should be able to do:

    parallel -j0 ping -nc 3 ::: qubes-os.org gnu.org freenetproject.org

This will send 3 ping packets to 3 different hosts in parallel and print
the output when they complete.

Watch the intro video for a quick introduction:
https://www.youtube.com/playlist?list=PL284C9FF2488BC6D1

Walk through the tutorial (man parallel_tutorial). You command line
will love you for it.

When using programs that use GNU Parallel to process data for
publication please cite:

    Tange, O. (2024, July 22). GNU Parallel 20240722 ('Assange').
    Zenodo. https://doi.org/10.5281/zenodo.12789352

Copyright (C) 2007-2022 Ole Tange, http://ole.tange.dk and Free
Software Foundation, Inc.


= New versions =

New versions will be released at: https://ftp.gnu.org/gnu/parallel/


= Dependencies =

GNU Parallel should work with a normal full Perl installation. However,
if you system has split up Perl into multiple packages then these are
the important ones:

    opkg install perlbase-getopt perlbase-ipc procps-ng-ps perlbase-mime

SPDX-FileCopyrightText: 2021-2022 Ole Tange, http://ole.tange.dk and Free Software and Foundation, Inc.
SPDX-License-Identifier: GPL-3.0-or-later